Route the new belt around the existing belt path using the serp belt placement tool. While you are wrapping the belt around the tensioner, rotate it one more. Before wrapping the new belt around the grooved pulleys, wrap it around the crankshaft pulley. Put the belt on a rounded, non-grooved roller to complete the task. Verify again that the belt follows the right path and is in line with all of the pulleys. Release the tensioner gradually.
In This Article...
How much does a serpentine belt replacement for a 2012 Nissan Altima run?
We’ve produced a list of the other often asked-about Nissan Altima repair expenses. Although not an exhaustive list, the list below does include a range of other repair requests. These repairs’ estimated costs do not account for taxes or other expenses. Estimates are based on data and research from RepairPal.
The AC compressor Between $860 and $953 is what it usually costs to replace the AC compressor in a Nissan Altima. While parts are priced between $716 and $771, labor costs are predicted to range between $144 and $182.
Brake Disc Between $249 and $269 is the typical price to replace the brake pads on a Nissan Altima. The cost of labor is expected to be between $74 and $94 while the cost of the parts is $175.
Shoe Brakes Between $221 and $259 is the typical price range for replacing the brake shoes on a Nissan Altima. The cost of labor is expected to be between $140 and $178, while the cost of parts is $81.
Change of CVT Transmission Fluid Nissan Altima gearbox fluid changes typically cost between $171 and $187. While parts are priced at $116, labor expenses are predicted to range between $55 and $71.
ejector manifold Nissan Altima exhaust manifold replacements typically cost between $1,232 and $1,476. Between $455 and $575 is the expected cost of labor, and between $777 and $901 is the estimated cost of parts.
Flexible exhaust pipe Nissan Altima exhaust pipe replacements typically cost between $1,322 and $1,357. While parts are priced between $1241 and $1254, labor costs are predicted to range between $81 and $103.
Head Seal Nissan Altima head gasket replacements typically cost between $1,390 and $1,803. The cost of labor is expected to be between $1185 and $1496, and the cost of parts is between $205 and $307.
Oil Spill (Diagnosis) Between $88 and $111 is the typical price range for diagnosing an oil leak in a Nissan Altima. Between $88 and $111 is estimated to be the cost of labor. Taxes and fees are not included in the estimate.
Radiator A Nissan Altima radiator replacement typically costs between $562 and $822. While parts are priced between $333 and $532, labor costs are predicted to be between $229 and $290.
Belt of Serpentine Serpentine belt replacement for a Nissan Altima typically costs between $94 and $115. Between $50 and $65 is the projected range for labor expenditures, while between $44 and $50 is the range for parts.
Gasket for a valve cover Nissan Altima valve cover gasket replacements typically cost between $124 and $163. The cost of labor is expected to be between $105 and $134, while the cost of parts is between $19 and $29.
Is it possible to incorrectly install a serpentine belt?
It may occasionally be feasible to install a serpentine belt incorrectly. The alternator, water pump, air conditioner compressor, or power steering pump may not operate properly if this occurs because one or more pulleys will revolve in the WRONG direction. This could result in serious issues.
Without a serpentine belt, can you operate a vehicle?
If you’re wondering if you can operate your vehicle without a serpentine belt, the answer is categorically no. You should never operate a car without a serpentine belt because it performs the crucial job of transporting antifreeze to critical engine components. The water pump is driven by the serpentine belt, and without it, there wouldn’t be enough coolant flow to keep the engine from overheating. It’s also crucial to keep in mind that the power steering pump is driven by the serpentine belt. The power steering pump, which generates hydraulic pressure, is inoperable without the serpentine belt. As a result, turning the steering wheel will be challenging, if not impossible.
How long does a serpentine belt replacement take?
The length of time it takes to replace a belt depends on your car’s model and how easily it is reached.
A damaged serpentine belt can be fixed or replaced with a new belt in as little as 15 minutes and as much as an hour.
Which three belts are there in a car?
Explaining Every Drive Belt in a Car
- Temporary belts. A rubber belt with notches called a timing belt opens and closes engine valves in sync with the pistons.
- Belts with serpents. The serpentine belt in your car is a lengthy, continuous belt that powers every part of the engine.
- V-Belts.
What occurs if a drive belt ruptures?
With a broken timing belt, your automobile cannot operate. You won’t be able to drive at all by the time the belt snaps because the harm has already been done. The vehicle will need to be towed to an auto repair facility.
How much time can a car operate without a serpentine belt?
The answer to this issue depends on a few different variables, but generally speaking, your automobile should be able to run for 20 to 90 minutes even with a broken serpentine belt.
On a hot day, the engine will overheat more quickly without a working cooling system, reducing your window for driving.
However, if the temperature is cold and your battery is completely charged, you might be able to operate the engine of your car for a little bit longer than 90 minutes before the battery runs out. That may be sufficient time to reach a close-by mechanic.
To prevent battery drain, all electrical and electronic equipment should be turned off. Also, keep in mind that your steering wheel will feel somewhat heavier.
The answer to this issue depends on a few different variables, but generally speaking, your automobile should be able to run for 20 to 90 minutes even with a broken serpentine belt. On a hot day, the engine will overheat more quickly without a working cooling system, reducing your window for driving.
Serpentine belt: Does it impact the transmission?
Your car’s transmission may sustain damage if the serpentine belt ruptures. The engine will start to overheat almost immediately after the serpentine belt in your car snaps. The water pump can’t sufficiently cool your engine if the belt isn’t moving. Your transmission could sustain damage if the engine overheats.
How much does a serpentine belt replacement cost?
A common serpentine belt costs no more than $75 and starts at about $25. You could change the belt yourself if you have a basic understanding of auto repair, which might save you between $75 and $120 in labor costs. You should budget between $100 and $195 to replace your serpentine belt altogether.
The straightforward fix for this issue shouldn’t take more than an hour—two at most. It depends on the car’s model and how simple it is to access the serpentine belt inside the chassis of the vehicle.
What results in a serpentine belt rupturing?
Serpentine belt issues typically have one of three root causes: faulty belt tensioners, pulley misalignments, or faulty bearings in the tensioner, idler, or one of the belt-driven accessories (including the water pump).
Does the timing belt resemble the serpentine belt?
Horizontal “teeth” on a timing belt are designed to accommodate the crankshaft and camshaft. A serpentine belt, on the other hand, has numerous vertical V-shaped grooves running the length of the belt. These belts must be changed eventually (roughly around the same time).
Serpentine belts: do they produce noise?
A noise coming from a freshly installed serpentine belt indicates an issue with the engine’s front end drive system. Serpentine belt noise is the belt drive system’s equivalent of a “check engine light,” signaling a problem. Surprisingly, the belt is not the main offender most of the time.
Which instruments are required to repair a serpentine belt?
About: YouTuber who enjoys cars and makes informative how-to videos on repairs and upgrades. Don’t forget to click the FOLLOW or SUBSCRIBE buttons!
A video instructional showing how to change a vehicle’s serpentine belt. The alternator, water pump, power steering pump, and air conditioner compressor are just a few of the components that are driven by a serpentine belt, which is a wide, thin belt with numerous ridges. The manufacturer of the vehicle will determine the necessary maintenance intervals. The belts should be inspected every 32,000 km (20,000 miles) to 160,000 km (100,000 miles), according to the manufacturers, and should be replaced if there are any cracks, portions missing, fraying, glazing, etc. It ought to be checked every time I’m beneath the hood, say, for an oil change. If the belt were to malfunction—that is, break—they might occasionally just come off or it might cause more engine damage. A 1997 BMW 540i is the specific vehicle I’m working with at this location right now.
Supplies & Tools Required:
- new belt replacement
- leverage tool
- Ramps or jack and axle stands
- a fresh tensioner
- fresh pulley
- tool set
- Set of ratchets and sockets
What noise does a loose belt make?
A noisy, high-pitched squeaking or squealing drive belt is frequently present. However, the look and tension of the drive belt give away the problem the most. Simply said, a loose belt has a relaxed appearance and feel.