The 2018 Hyundai Sonata’s check engine light can be reset in a number of ways, but occasionally it will turn off on its own after some time behind the wheel. You can also unplug the battery, wait for about 20 minutes, and then plug it back in to reset the check engine light on your car. You will need to utilize an electronic scan tool to identify the issue and resolve it if neither of those solutions work. You may check to see whether the gas cap is loose, which is one of the common reasons why the light might be on, without the need for a scanner. If that isn’t the issue, you’ll need to use the scanner to identify the issue, resolve it, and then reset it using the scanner.
Connect an OBD II scanner to the Hyundai Sonata’s appropriate port, then follow the instructions on the scanner to reset the check engine light.
In This Article...
SERPRESULT
If the Hyundai Sonata’s check engine light begins to flash, the issue requires quick attention, and the Hyundai should be taken in.
What might turn on a Hyundai Sonata’s check engine light? * Problems with all aftermarket products
How can a Hyundai’s check engine light be reset?
- As you drive, let the light turn off on its own. None.
- Three consecutive times of starting and stopping the engine None.
- Reconnect the battery after disconnecting it. Wrench.
- Use a code reader for the OBD
Why does my 2011 Hyundai Sonata have the check engine light on?
If your Hyundai Sonata’s check engine light begins to flash, the issue requires immediate attention, and your Hyundai should be taken in right away. Usually, a serious engine misfire that causes unburned fuel to leak into the exhaust system is indicated by this blinking light.
What should you do if the Hyundai check engine light is on?
The check engine light on your Hyundai will come on if the MAF isn’t working properly. Usually, changing your air filter will take care of the issue. Through our parts center, you may place an online order for an air filter. Oxygen Sensor: To assess how much gasoline is being used, this part measures the oxygen levels in the exhaust.
Can my Hyundai be driven with the check engine light on?
We strongly advise not driving your Hyundai while the check engine light is on and setting up Hyundai servicing right soon. The most frequent causes of your check engine light appearing are listed below: You must replace your mass airflow sensor, or MAF.
Can I reset the check engine light on my own?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
Resetting the check engine light at Autozone?
Are you curious if your neighborhood Autozone can extinguish a check engine light? The answer is “yes,” but there are a few points to keep in mind:
- Local auto parts shops frequently offer to read your codes for free, but not all of them will turn off the light because of legal concerns. Some of them aren’t even equipped with code scanners for the check engine light.
- Whether or whether it is obvious that the components will cure your check engine light, salespeople are frequently encouraged to sell you items while you are at the store (and may actually be a waste of money).
How long does the check engine light take to turn off?
The check engine light will go away after about three days of steady driving. Cars function in cycles. The glow should go after finishing 10 to 30 cycles, which should take three days. As I mentioned earlier, your car goes through a cycle of turning on, driving till it warms up, then turning off once more.
Keep in mind that the issue that caused the light to turn on must be resolved in order for this procedure to be effective. Try several approaches if this one doesn’t work; if not, bring the automobile to an experienced mechanic.
Without a scanner, how can I turn off my check engine light?
Using a Scanner to Reset a Check Engine Light. Without a scanner, unplug the negative battery cable from the engine and wait a few seconds to restart the check engine light. Your car’s diagnostic system will be reset as a result, and if the underlying problem has been fixed, the light should go off right away.
How far should I drive when the check engine light is reset?
How many miles should I drive after resetting the check engine light for examination if I’m trying to turn off a check engine light? While there are many factors that can affect this, there is a rough distance that you need travel in the car before you can determine whether the light will go out.
Of course, various factors may affect how many miles you must travel. These may consist of:
- The car’s overall dimensions
- The state in which it is
- The number of miles per gallon
Next, we’ll go through each of these so you can get a better idea of what your specific vehicle might need to turn off the check engine light. The distance you must travel to observe what is happening might be affected by all of these factors and more.
Typically, you must travel 50 to 100 miles after clearing the computer in your automobile. Hopefully, this will permanently turn off the check engine light. If it doesn’t, a more serious factor may be making this item switch on. To determine what the actual issue is, you might need to take it to a professional.
There are several cars available that allow you to tower above obstacles without sacrificing the comfort of a compact automobile. We’ve compiled a list of our favorite new sedans with high ground clearance as a result.
Can the check engine light be turned off by unplugging the battery?
3) Unplug the battery before re-plugging it in. Ideally, this will erase the data and turn the light off. After that, you can turn on the ignition and reconnect the battery. The check engine light ought to go out after roughly a minute.
Why is my engine light on when there doesn’t seem to be a problem?
The on-board diagnostic system uses the “check engine” light to alert you of problems. However, that something might be any number of other things, great or tiny. It might turn on due to a minor issue, such as a gas cap that is loose or broken. It might also indicate a serious engine breakdown.
What year did Hyundai recall its engines?
Model Year 2013 and 2014 Hyundai Sonata vehicles with 2.0 liter and 2.4 liter gasoline direct injection (GDI) engines produced at Hyundai Motor Manufacturing Alabama will have their engines inspected and, if necessary, replaced as part of a safety recall by Hyundai in the United States.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
What does a check engine light that is solid yellow indicate?
To monitor what is happening inside your car, the onboard diagnostic system interacts with various components of it. A warning indicator light is sent to your dashboard when there is a problem with the electronic control system to let you know there is a problem. Depending on how the light appears on your dashboard, you can determine whether it’s a serious or minor problem.
It’s not usually a significant problem, but the constant yellow light is alerting you to take a look and solve the small problem as soon as you can. The engine of your car is misfiring if the light is flashing, therefore you need to look into the issue right away. If you don’t think it’s safe to drive, you don’t need to stop immediately away. However, you run the risk of damaging the engine of your car if you ignore the bright or flashing light. If your engine light illuminates, we advise performing the actions listed below.
Can a fuse turn on the check engine light?
The check engine light was not brought on by the fuse. The dlc fuse blowing is what prevented them from checking the code. It frequently happens because the front power point has a problem, such a coin or a defective charger in it. Checking the codes should be possible after replacing the fuse at the front power point.
Engine light began going on, and as you said, I was unable to interpret the codes. The fuse was changed, and the light is now off. Despite the fact that the engine light has been on and off for months, the inability to interpret codes indicates no faults.
My check engine light was on, but I was unable to verify the codes. I discovered that the fuse for the
When the cigarette lighter was replaced, code P0306—cylinder #6 misfire—was discovered. My code was cleared.
used my scanner, and the code vanished. I misted water onto coil #6’s wire.
the other coils with water, and the check engine light stayed off. P0306 is something I’m familiar with.
I’m unsure as to what else than a defective coil or wiring may be responsible for this.
Does the engine light signal low oil?
There are a number of things you may do immediately if your check engine light illuminates to determine whether there is a problem. By looking into these, you may be able to find a quick solution, quickly spot a wider issue, or, at the very least, swiftly rule out some of the potential problems. As soon as the check engine light illuminates, the following issues need to be addressed:
- Your engine’s missing its cap: If fluids is exposed, your check engine light can come on.
- Unplugging or having a loose wire can cause a check engine light to be activated very rapidly. A wire can also become loose on its own or be damaged by an outside agent, like a mouse or squirrel.
- Low oil pressure: Your check engine light can come on if your automobile is low on oil. This is frequently displayed in its own bright light in addition to the dashboard check engine light.
- Overheating: The check engine light may once more come on if your car’s engine temperature is rising. Stop immediately if you notice the temperature indicator rising.
Some of these problems can be easily fixed by the homeowner, including by adding more oil or changing a cap. However, you might need to take your automobile to the repair if it’s overheating or if a mouse chewed through an internal wiring.
Some models will have a yellow version of the light to suggest that you check for problems and a red one to signify that you should stop right away, according to the system. However, regardless of the precise hue of the signal you see, you should always pull over as soon as you can if you aren’t convinced that this is the case.
In any case, if your check engine light comes on when your car breaks down, it’s critical that you carefully analyze the situation, refrain from performing impromptu repairs, and stay safe until you have your car towed to a shop where it can be properly assessed.