Has a collision caused your Hyundai’s airbags to deploy? Is the dashboard airbag light on? Have you recently purchased a salvage vehicle and require seat airbag repair? If you indicated “yes” to any of these inquiries, it’s possible that your airbag light or module needs to be fixed or reset.
The brains of your car’s Supplemental Restraint System, or SRS, is an airbag module. When your car has been in an accident or collision, it uses the sensors to decide what has to be done. There are a number potential causes for the airbag light to illuminate. It can mean that your seat belts aren’t working properly. Water damage to the sensors may also be a problem. The SRS light may also come on if the car has recently been in an accident.
The airbag module calculates that the seat belts need to lock and tighten if someone jerks while wearing a seat belt or if the Hyundai abruptly breaks. This keeps them firmly seated in your seat. The airbag did not need to deploy in this situation. The seatbelts offered enough protection. However, the module detects the requirement for the airbags to deploy and the seat belts to tighten in the event of an accident, such as a head-on collision, in order to protect both the driver and the passengers. Get a Hyundai Sonata Airbag light reset or repair service if your airbags have deployed. Make that the airbags, seatbelts, and all other components of your Hyundai’s SRS will function correctly in the event of a collision.
You’ll probably hear from a dealer that you need to buy a new airbag module, which can run you up to $1,000. The module will need to be reprogrammed to your vehicle’s VIN whether it is new or used. This could be a step in a protracted, challenging, and expensive procedure.
In This Article...
How to interpret the Hyundai Airbag Light?
Owners of Hyundai vehicles frequently complain about their airbag light staying on all the time. If the airbag light on your Hyundai continues to illuminate while you are driving, there is either an issue with the airbag system or a malfunctioning sensor. Your car’s airbags might not inflate in the event of a collision.
When you switch on the ignition, the airbag light in your instrument cluster should turn on for around five seconds before going off.
All the sensors and parts are quickly checked by the airbag system. Your Hyundai’s airbag light ought to go out if there are no issues. The light remains on if any issues arise with any of the parts.
We advise that you contact your Hyundai dealer to find out if your car is still covered by warranty before attempting to troubleshoot the airbag light on your Hyundai. If your Hyundai is still covered by warranty, your dealer might fix it for free.
benvei
There is no doubt that you should check your airbag control module; something must have turned on that light. You might have harmed some of the yellow airbag wiring while installing your radio. I believe the airbag wiring to the passenger side airbag is located directly behind the radio.
With an OBD-II scanner that can examine the airbag module (not the $5 ones on eBay), you can reset the code. I don’t think it’s a smart idea to simply reset it without looking into what caused it. Personally, I wouldn’t interfere with the airbag system; instead, I’d let the dealer check it out to make sure everything is in order. OBD Scanners that can check ABS, Airbag, and other things are not cheap, so perhaps that is also the less expensive option.
How can I turn off the airbag alert light?
When you experience the same problem, you should start by following this technique, which is identical to resetting the airbag light on a Toyota Camry. It needs timing the airbag light and has four straightforward stages that are simple to complete.
First, activate the ignition. Wait for the airbag light to turn on next; it typically illuminates for seven seconds before automatically turning off. After waiting three seconds, immediately flip the ignition switch off. Before starting the engine, go through the basic procedures a couple of times. Your car’s airbag light should illuminate for seven seconds before turning off permanently if everything is done correctly.
Is a reset of the airbag light necessary?
The airbag warning light could come on as a result of a sensor malfunction or accidental travel. It will be necessary to reset the system and examine the sensors. The purpose of the airbag clock spring is to preserve continuity between the vehicle’s electrical wiring and the driver-side airbag.
What is the cost of turning the airbag light back on?
Reset Airbag Light, at No. 1 Although it typically costs a few hundred dollars and takes several hours, depending on the type of automobile it might cost as much as $600.
Is the airbag in the 2011 Hyundai Sonata being recalled?
If you want to see if your car is affected by the Sonata Airbag Control Unit Recall, enter your VIN.
In the US, Hyundai has issued a safety recall for specific vehicles’ electronic airbag control units because:
- Vehicles with the Hyundai Sonata model year 2011–2013.
- Vehicles with the Hyundai Sonata Hybrid model year 2011–2012
How does the safety recall work? The concerned vehicles have an airbag control unit that detects crashes and directs the deployment of seat belt pretensioners and airbags as needed. The frontal air bags, seat belt pretensioners, and side air bags may not deploy in some cases due to electrical overstress damage to the module circuitry.
How will Hyundai respond? In the case that your airbag control unit is impacted, your Hyundai dealer will install an external wire filter kit to prevent electrical overstress. This service is offered FREE of charge. The FAQ section contains additional information.
By removing the battery, is it possible to restart the airbag light?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.
How do I deactivate my airbag?
If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS). When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Make sure the switch is in the appropriate position.
Why won’t my airbag light activate?
The backup battery is dead. It is the most frequent cause of an airbag light that won’t go off. It might take place if your car’s battery is running low or has been depleted for any other cause. Once the battery is fully recharged, the issue will be resolved. But the battery might still be in place.
Can an airbag code be cleared?
Two categories of codes exist:
- Unhard Codes
- Precise Codes
Yes, most scanners allow you to delete soft codes after a problem has been fixed. These codes represent a malfunction with an element or component of the SRS system, such as
- vehicle airbag codes
- codes for seatbelts
- coded impact sensors
No, scanners are unable to remove these codes. These codes, which are also known as crash data, are kept following a car accident. These codes are also hardware error codes.
What does it imply if the airbag light is on indefinitely?
A problem with the seatbelts or airbags is indicated by the airbag light. Therefore, it’s usually not a good idea to drive when the airbag light is on. We advise having it towed to the dealership rather than driving it yourself if it remains illuminated in your car.
What could turn on the airbag light?
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
Dashboard Warning Lights Explained, which offers guidance on a variety of lights and their meanings, is a good resource if you want to learn what additional warning lights represent and what to do when they illuminate.
How can an airbag malfunction be detected?
The airbag codes consist of two digits. To read the codes, count the flashes the light makes, then count them again after the pause. For instance, two flashes, a pause, and four flashes indicate a code 24 issue with your airbag system.
Where is the switch for the passenger airbag?
If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS).
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel.
ALL FRONT-FACING PASSENGERS (CHILDREN AND ADULTS) CAN SIT SAFELY ON THE PASSENGER SEAT WHEN THE AIRBAG IS ACTIVATED.
Rear-facing child seats are safe for use on the passenger seat when the airbag is switched to OFF.
How much does a new airbag sensor cost?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Avoid taking the chance by always purchasing OEM original, genuine products and never aftermarket sensors.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the automobile would deploy, costing thousands of dollars to repair.
Driving with the airbag light on is it forbidden?
In some vehicles, it is even possible to turn off the passenger airbags, which will make your dashboard’s airbag light come on.
You should only deactivate the passenger airbag when absolutely necessary because, as was previously said, airbags are an essential safety element.
If your airbag light ever illuminates for no apparent reason, you should try to resolve the situation.