The windshield wipers on your 2020 Hyundai Tucson connect with a tiny hook connector. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
In This Article...
Cleaning and wiper blades
utilized by a few professional car washes. Clean the blades if they are not wiping effectively.
Avoid the following to protect the wiper arms, blades, and other parts from damage:
- Use solvents such as paint thinner, kerosene, or gasoline on or close to them.
- Make an effort to manually operate the wipers.
- Use wiper blades that are not specified.
1. To reveal the wiper blade assembly, raise the wiper arm and slightly rotate it.
2. Pull the blade assembly down while depressing the clip (1). (2).
3. Remove it from the arm.
4. Reverse the removal and installation of the blade assembly.
5. Put the windshield wiper arm back in place.
Raise the wiper arm, first.
2. Pull the wiper blade clip out (1). and then remove the blade assembly (2).
3. Replace the blade assembly in the same manner as it was removed.
4. Put the windshield wiper arm back in place.
2. Rotate the wiper blade (1) assembly just a little before pulling it apart.
3. Insert the center piece into the slot to assemble the new blade.
4. Try to pull the blade assembly just a little to make sure it is securely fastened.
How are wiper blades changed on a Hyundai Tucson 2022?
The wiper blades may be worn out or cracked and need to be replaced if they no longer effectively clean the windshield.
Do not try to manually operate the wipers to avoid damaging the arms or other parts.
Use of a non-recommended wiper blade could lead to wiper failure and malfunction.
- The wiper arms should only be raised when in the highest wiping position in order to avoid harming the hood and the arms.
- Before driving, always put the wiper arms back on the windshield.
The wipers on this car are “hidden,” which means that they cannot be raised from their bottom resting position.
- Once the engine has been turned off for 20 seconds, raise and hold the wiper lever in the MIST (or V) position for around 2 seconds to get the wipers to the top wipe position.
- You can now remove the wipers from the windshield.
- Reinstall the wipers on the windshield gently.
- To put the wipers back in the bottom resting position, turn the wipers to any ON setting.
- Wiper blade clip: raise it. Next, raise the wiper blade.
- Pull down the wiper blade while activating the lock (1). (2).
- From the wiper arm, remove the wiper blade.
- In the reverse order of removal, assemble a fresh wiper blade assembly.
- The wiper arm should now be back on the windshield.
- the wiper arm up.
- Wiper blade clip: raise it. The blade assembly can then be removed by pulling it down.
- Invert the removal process when installing the replacement blade component.
Lift the wiper arm of the rear wiper and move it to the lower middle portion. To remove the wiper blade, pull it.
- Pull the wiper lever to the MIST position for more than 2 seconds after turning the ignition off of the car within 20 seconds to get the wiper to the middle of the bottom section.
- The wiper blade should be raised and removed.
- Install the new blade assembly by sliding the center piece into the wiper arm’s groove and pushing it in until it clicks.
If the replacement is finished, put the wiper arm on the back windshield, turn the key in the ON position, and use the wipers to test that the blade is properly placed.
- By attempting to pull the blade assembly just a little, be sure it is securely fastened.
We advise having the wiper blade changed by a certified HYUNDAI dealer to avoid harm to the wiper arms or other parts.
The wiper arm’s core component could be harmed if it is pulled with too much force.
- When the wiper is used without washer fluid or the blades are frozen, it cannot operate for approximately 10 seconds. This is not a problem; rather, a motor overload circuit in the wiper motor has triggered the wiper protection mechanism.
- With the wiper blades elevated, the front windshield should be cleaned with a water hose and thoroughly dried. When the oil or wax is applied to the wiper blades, they should also be cleaned.
How is the rear wiper blade changed on a Hyundai Tucson?
- Get rid of the old blade. Off the window, lift the wiper arm.
- Take away the wiper. The wiper will gently click free from the wiper arm once it has been turned.
- Put the replacement blade in place. Put the replacement wiper blade’s little bar attachment into the wiper arm’s hook.
- The blade should be secured.
- Done
How are Hyundai wiper blades installed?
Generally speaking, wiper blades should be replaced every six to twelve months or whenever you notice a difficulty with visibility. Smearing, streaking, chattering, or skipping wipers should probably be replaced or repaired.
- Other issues to watch for are:
- Clear tears, fissures, and missing parts
- Older blades that have trouble adjusting to the windscreen
- smashed frame
- metallic rust
You may either have the service staff replace or repair the wiper blades for you at your local Hyundai dealer or you can go there to get the Hyundai Parts you need. Use the methods below if you’d rather do it yourself.
NOTE: Be careful not to let the wiper arm hit the windshield; doing so could cause the glass to break or chip.
- First, make sure that your car is off.
- Step 2: Release the clip to take out the old wiper blade assembly.
- Step 3: Immediately attach the replacement wiper blade and make sure it is firmly fastened. The wiper blade should then be placed against the windshield. Continue with the other wiper blade.
- Step 4: Turn on the wiper switch inside your Hyundai to test the wiper blades.
To book service at a dealership close to you or to learn more about your vehicle’s upkeep, go to the Vehicle Health website.
What size wiper blades come with the Hyundai Tucson?
All of the following wiper blades are made to fit the Hyundai Tucson 2015–2021 model, which requires a 26” wiper blade on the driver’s side and a 16” blade on the passenger side. For this model, the Standard Hook arm attachment is the appropriate type of wiper arm fitting. Upgrade to the more modern Retrofit style wiper blade is an option. We also provide rear blades for this Tucson; just click on the Rear Blades item below.
Do you swap out both wiper blades for the windshield?
Visibility is essential for driving safely. A decent set of windshield wiper blades might literally save your life in a storm. However, they do eventually wear out, just like all other auto parts. When should you get new ones, and how can you tell? Every six months, both wiper blades should ideally be changed. When the wipers are on, car owners should pay close attention to what they are hearing. Discard the blades as quickly as possible if they create any slapping, squeaking, or chattering noises.
Is there a rear wiper on the Hyundai Tucson?
The rear screen wiper blades listed below are compatible with the Hyundai Tucson SUV from 2015 to 2021. The 14″ plastic moulded kind of wiper required for the Hyundai Tucson 2015–2021 model is simply replaceable.