How To Replace Hyundai Key Fob?

Hyundai / By
  • As soon as you get inside your Hyundai, check that all the doors are closed.
  • Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
  • Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
  • Congratulations

Will a Hyundai key fob be replaced?

The Hyundai Protection Plan’s Key Replacement Protection is fortunately available to assist. If your keys are broken, lost, stolen, locked inside your car, or simply not working, we can help you replace them anywhere in the United States and Canada.

How much does a new Hyundai key fob cost?

It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.

Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.

We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.

Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).

For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.

We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)

Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.

How can I get a new car key fob?

You can replace your key fob at either a car dealership or a locksmith.

Unfortunately, it happens frequently that a car dealership will hire a locksmith to replace the keys you supplied to them before charging you. Therefore, even though a car dealership will sell and program the automobile key fob for you, the cost will be high.

The locksmith is the finest option. The services you require will be reasonably priced and produce excellent outcomes. Recognize that there is no need for you to visit the dealership for any requirements.

Vehicle key theft is a crucial task for a locksmith. You want to be sure that only you can operate your vehicle. If necessary, the locksmith will have to reprogram your keys because of this.

Can I customize my Hyundai key fob myself?

Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.

There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.

Is it possible to change a key fob on your own?

Many automakers have started designing vehicles with locks that can be unlocked with little more than a key fob since the development of remote technology. The owner of a key fob can easily unlock a door by pressing a button, and many of them can also start their car by pressing a button as long as the fob is inside.

Unfortunately, the dealership may assert that they have property rights over the device and, as a result, only they can make a copy and program it, which comes with an outrageous charge, if a car owner loses their key fob or wishes to make an extra copy. However, while making a new key fob and programming it to function with your automobile may require expert guidance, a knowledgeable locksmith may help you with this task without forcing you to go back to the dealership for assistance.

But hold on, is it illegal to create a new key fob without the dealer’s consent?

Some dealers can even claim that if the task is not carried out by a licensed operator, making a new key fob is illegal. However, even if this might be the case with a leased or rented car, you are probably allowed to create as many copies as you want with the assistance of a professional.

Additionally, programming a key fob to work with your car is also not a difficult process. While you shouldn’t attempt to manufacture a copy yourself, a skilled locksmith can provide you with a new key fob quickly.

Can an old key fob be programmed to operate a different vehicle?

I was wondering whether it was feasible to reset or overwrite that key fob to my vehicle because I have a used remote control with the same button configurations (including remote start). I presently only have one remote that is set up for the automobile.

I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:

  • The key fob’s battery should be removed and then replaced (unless you put in a new battery)
  • After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
  • Turn the key to the aONa position after inserting it in the ignition.
  • The key should be in the aOFFa position.
  • Using both your hand and the remote control, lock the door after turning the key to the aONa position.
  • While simultaneously using the remote and your hand to unlock the door, turn the key to the aONa position.
  • Remove the ignition switch’s key.
  • the driver door with the key.
  • Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
  • Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
  • Put the key in the ignition switch and attempt to start the engine if the doors will lock.

After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our

I need help pairing my Hyundai key.

It is recommended that you always keep your NFC (Near Field Communication) Key Card on hand as a backup key in case your smartphone experiences a power outage or other problem. The card resembles a hotel key card and may therefore be conveniently stored in a wallet or billfold. The NFC Key Card will also need to be associated and registered with the automobile in order to function as a backup digital key. If the card hasn’t already been associated with the car, please follow these steps:

  • Start your car.
  • Make sure the Hyundai Digital Key app is installed on your primary smartphone and that it is in the car.
  • Pick Pair NFC Key Card through BLE from the side menu in the app.
  • the wireless card changer with your card in it.
  • There will be automated pairing.

Follow these steps to finish the registration procedure for models having a navigation screen:

Are key fobs replaced by AutoZone?

AutoZone does offer key duplication services for cars made by Toyota, Ford, Honda, Dodge, GMC, Mercedes, Kia, and other manufacturers. These services include key duplication, transponder keys, key fobs, and vehicle key blanks.

Key fobs are they covered by the Hyundai warranty?

My Hyundai Elantra’s key fob was lost, and I recently learned how pricey they are to repair. I’m hoping that a replacement will be covered by my warranty. Are key fobs covered by my Hyundai warranty?

In less than two minutes, find out if your auto insurance is being overcharged.

How unfortunate about your key fob! Only the Hyundai Protection Plan’s Key Replacement Protection is applicable to replacing a key fob. This implies that your key fob will not be covered if you just have other warranties, such as the Powertrain Limited Warranty or the New Vehicle Limited Warranty.

All key-related emergencies are covered by the Hyundai Protection Plan’s Key Replacement Protection. The time when you could simply cut a second key is long gone. Fobs are complex, intricate devices that can operate more than just a car’s locks.

This warranty has a monthly payment option and no deductible. This coverage includes the following:

  • reimbursement for the cost of a new key or transponder for a vehicle, as well as any necessary programming.
  • assistance with vehicle lockouts 24 hours a day, with locksmith services up to $100 reimbursed.
  • transferable to a different car.

The comfort of mind it provides makes the price of this frequently ignored guarantee worthwhile. The last thing you want is to spend a lot of time locked out of your automobile.

Reviewing your Hyundai auto insurance costs to ensure you are not overpaying is another approach to feel more at ease. Fortunately, Jerry, the vehicle insurance comparison software, makes it as simple as possible to discover a better deal.

The Jerry app, which is available for free, searches its network of more than 55 top-rated partner firms for personalized quotes and is a licensed broker and insurance comparison tool. It’s simple to switch since a member of Jerry’s team of insurance professionals can assist you along the route! Every year, users save on average close to $900.

Without my original car key, how can I program my new one?

  • Launch Ignition. Put the key in the ignition while seated in the driver’s seat.
  • Wait. For 15 minutes, the security light must be on.
  • Turn on and off. After 15 minutes, the security light ought to turn off.
  • Recurring Steps

Can a key fob be programmed without visiting the dealership?

Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.

What’s the cost of Hyundai keys?

Make a duplicate of your Hyundai key. Mobile or in-store service in Pinal County, Arizona.

The cost to cut and program a replacement key on-site ranges from $133 to $395*. To view your personalized quote, enter your car’s make and model.

Hyundai VIN key codes have been available since 1999. For older models, changing a car key entails removing one or more locks.