Even if your E90 doesn’t have comfort access, there is a way to start the engine and start driving without a key. A BMW anti-hijack feature, that is. Simply put the key in the ignition and start the vehicle as usual. Once you’ve finished, turn off the engine and take the key out of the ignition. Pushing the start button now without a key will start the automobile in roughly 10 seconds, allowing you to take off. Although many of you may already be aware of this feature, I figured I should still share it with those who don’t realize that their BMW has it.
It’s more of a safety feature than anti-hijack. The automobile will still start if you have a key issue and stall out on the railroad lines, allowing you to get off the rails.
done this previously. After considering the potential consequences, I decided to stop using the “DIY comfort access” method. hehe. however, thank you for posting for others.
It works for both my 2007-1 series and 2008-3 series coupes, however if you open the driver-door or wait a little bit longer before restarting the engine, this option is disabled. I tested this about a month ago.
Since learning about it on this forum, I’ve been doing this for approximately a month. I haven’t had any problems with it, and yes, I also use it to warm up my car. No need to panic because the radio turns off after a few minutes, and in case you’re wondering, the car will still be running even if the key fob is distant from the vehicle. I put this to the test the other day when I visited Walgreens.
I do this to get my car warmed up. not necessarily to warm the engine up, but more to warm my seat and the cabin. It’s excellent if my car is parked on the street or somewhere else where you can’t leave the doors open while it warms up. (Or use the laser key to unlock the door)
I regularly engage in this. You don’t even need to hold the brake pedal down; just reapply it, press the start button, lock your doors, and dash into the store or back into your house. However, I suppose you have leftover heat if you are entering the store.
Yes, I’d rather to take a chance than have my valve train begin to tick because they aren’t getting lubricated during short trips when the car isn’t warmed up. I appreciate the guidance nonetheless.
SURPRISINGLY, not every recommendation made by businesses is in your best interests. They’re a business, so if they can convince you to ignore your automobile and end up having to pay for more extensive repairs later on, they win.
Not to bring up an old topic, but wouldn’t starting the car twice be necessary for those who use this method to warm it up? Since the initial cold start is the toughest on the engine, I believe it is best to let the car warm up at that time rather than turning it off and putting it through a second cold start. Any thoughts?
In This Article...
How do you use a mechanical key to start a BMW?
Nowadays, keyfobs are used in most vehicles instead of their metal equivalents. But just in case, BMWs come with an emergency key in the keyfob. To start your BMW with a mechanical key, adhere to these steps:
- Push the button on the back of your key fob and pull the emergency key out of the key fob first.
- The driver’s side door can be unlocked with the use of the key. Although the automobile alarm might sound, don’t be alarmed. When you start the automobile, it everything turns off.
- Insert your key if your BMW has an ignition. If it doesn’t, insert the key fob into the slot marked with a key next to the steering wheel.
- Press the Stop/Start button after holding down the brake.
Your automobile ought to start once you’ve completed those instructions! If it still doesn’t work, your key may be broken or the ignition module may be malfunctioning. At that time, you ought to take your car to a mechanic so they can look at it.
Get roadside assistance from Jerry if you’re concerned about being locked out of your automobile. Your connection to their nationwide network of more than 55,000 service providers is made possible by Jerry’s premier roadside assistance. This way, no matter where you are, you all have access to lockout services, new keys, jumpstarts, and more!
How can I make a BMW key function to start my car?
It is still important to activate your new BMW key fob after purchasing one that has been customized for your car. recent automobiles:
- Use your current fob or key blade to unlock your car.
- Insert the fob in the ignition slot or hold it up to the key marking on the side of the steering column.
- Keep pressing the start/stop button until the no key warning goes away.
- To start your car, depress the start/stop button once, then release it.
Before using the Comfort Access option in E-series vehicles with keyless entry, you might also need to reprogram your car to delete your old key profile. It is important since E-series automobiles only let you save two Comfort Access-equipped keys in the memory of the vehicle. In order for the Comfort Access to function if you purchase a new key, you must first deactivate the old one and code your vehicle.
Please be aware that this procedure cannot be completed using a key that has previously been paired with another vehicle or a used key. Additionally, older BMWs require a distinct key programming procedure.
How do you use a key to start a BMW engine?
You can activate Remote Engine Start by pointing your BMW key fob at your car and pressing the lock button (the BMW Roundel) three times in a row.
The best way to start a car without a key
Remove the electronics from the plastic cover that is located underneath the steering wheel. Then, pound or drill a screwdriver into the ignition flaps until it is firmly in place. The screwdriver should then be turned in the same way as an automobile key. This will begin the vehicle.
Can a BMW be started manually?
You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.
Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.
Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.
How can I set up my e90 key fob?
Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
How is an extra BMW key used?
Insert your key if your BMW has an ignition. If it doesn’t, insert the key fob into the slot marked with a key next to the steering wheel. Next, apply the brake while holding it, then push the Stop/Start button.
Can I use my phone to start my BMW?
With the BMW Digital Key and BMW Digital Key Plus, go keyless. The key fob for your car can be replaced with an iPhone, Google Pixel, or Samsung Galaxy smartphone that is compatible. To lock and unlock, simply touch it to the driver-side door handle. To start the engine, place your device in the wireless charging tray.
Is it possible to locate BMW keys?
Nope. There is nothing you could do to make the fobs detectable even if there was a means to start reverse communication because they lack a speaker.
Has the BMW 3 Series remote start?
A number of updates and new services for BMW automobiles have just been published. BMW owners may now choose from a variety of other options in the ConnectedDrive Store to add to their vehicles in addition to the “Uneven Road Surface alert” feature. One of them allows you to remotely preheat the temperature of your BMW vehicle, and it is called “Remote Engine Start.” While Remote Engine Start has been a feature of BMW vehicles from MY 2019, it is now also available as a new “Function on Demand” that can be added to eligible cars that weren’t initially equipped with it. This functionality can be purchased through the ConnectedDrive Store.
Through Remote Software Upgrade, the new functionality can be downloaded and installed wirelessly. This is a fantastic feature for the sweltering summer and icy winter months. You can preheat the interior by turning on the heat or the air conditioning while starting the engine from inside your house or place of employment.
Simply tap a button in the My BMW app to turn on Remote Engine Start, and your BMW’s engine will start, allowing the cabin to reach the ideal temperature. A triple-click of the lock button on the BMW key fob will also activate Remote Engine Start.
Will my car start without a chip key?
Modern automobiles have a smart lock technology that enables one-button locking and unlocking. These cars have RF keys that let you control the vehicle however you want. But occasionally you might misplace the key or the battery in the key might die. Therefore, in these circumstances, you have no choice but to improvise.
Bypassing the immobilizer is the most effective approach to start the car without the chip key. Your car should be operational once you simply skip the wires. This technique is only suitable for experienced drivers, as you risk disabling some other components of your car.
The most important thing you should do is become familiar with every aspect of your car if you’re trying to figure out how to start your car without a chip key and want to learn everything there is to know about it. You have the tiniest chance of entirely wrecking the situation if you do it this way.
What happens if your BMW key is lost?
If you still have one key, you must bring your car, one piece of personal identification, one form of address identification, and the V5C logbook to your selected BMW Center*. You will need to make arrangements for your automobile to be delivered to your preferred Center along with the necessary documentation if you have lost both keys and are unable to access the vehicle.
* A photocard driver’s license cannot be used for both address identification and personal identification.
To keep you safe, our Centers are required to adhere to these security precautions. Additionally, you’ll have to sign for your new key upon picking it up.
The cost of a BMW key fob
The price of a 2020 Toyota Sienna fob was comparable. Dealers, however, gave prices as low as $150 to replace a key fob for a 2017 Honda Accord. A number of BMW retailers claimed that the additional security features built into the 2020 X5 key fob justifies the roughly $500 they spend to replace and program one.