Regardless of whether the doors are already locked, press the lock button on your key fob.
Press and hold the remote start button for four seconds after pushing the lock button. The button must be depressed for at least two seconds. A
After itas successfully receives the command, the car should start and the parking lights should flash.
The Hyundai will run for 15 minutes before turning off automatically. If you intend to use your remote start feature, you might want to make sure the temperature is set where you want it beforehand because the climate control will operate at whatever setting it was on previously. A A
In This Article...
How to use the Hyundai key fob’s remote start
It could initially seem self-explanatory. Your key fob has a remote start button, but using it doesn’t just involve pressing a button. You must lock the doors with the key fob before pressing the remote start button (even if the doors are locked already).
Hold the remote start button after locking the door for 4 seconds. Holding the button down for at least two seconds is necessary for it to function. Your Hyundai’s parking lights will blink in response to each command.
The heating and cooling systems in your Hyundai will operate until the pre-set temperatures once it is started. If no additional action is taken after 10 minutes, the car will again switch off. The car will turn off once again if you press the remote start button once more.
How does a Hyundai use remote start?
By simultaneously pushing the Lock and Remote Start buttons within three seconds, the Remote Start feature can be used. Your Hyundai will be inspected by the system to determine whether it is safe to start it. If it is, the engine will start after 5 seconds and run for up to 15 minutes. To turn off the engine, press and hold the Start button once more for two seconds.
How is a 2020 Hyundai Elantra remotely started?
The ONLY completely plug-and-play remote start solution for the Hyundai Elantra from 2017 to 2020. Most consumers can complete the installation process in under an hour. To start your Hyundai Elantra after installation, simply press the lock button on your original remote control three times. If the factory remote’s range is insufficient, you can also purchase one of our choices with a longer range when you check out. This kit now contains TAKEOVER, so when you open the door, the car won’t turn off and you may hop in and drive!
- Complete Kit includes ALL required parts.
- includes instructions for installation.
- Easy, straightforward, PLUG & PLAY installation
- Easy to install, requires no cutting or splicing
- These kits, sold in the thousands, are excellent!
- Hyundai Elantra, model years 2017–2020
- Your VIN #’s tenth letter must be an H, J, K, or L.
- Push-start ignition is required.
- Unable to work with key start
- Power locks and keyless entry are required for the vehicle.
- only an automatic transmission.
Plug and play installation was completed on the passenger side beneath the dash and glove box, and one t-harness was installed at the headlight switch on the driver’s side. Installation that is 100% Plug & Play ABSOLUTELY NO cables must be cut, spliced, etc.
Your present OEM remote’s lock button must be pressed three times in order to start the car.
Your present OEM remote’s lock button must be pressed three times in order to STOP the vehicle.
If you don’t get out and get in, the vehicle will run for 15 minutes before shutting down.
Simply get inside and depress the brake to take control of the vehicle after remote starting. After that, you can start driving without having to shut down or restart the car.
- Simply press LOCK three times on your factory remote to activate the remote starting. 3x Lock From OEM Fob Only = No Additional Remotes to Carry.
- 1-Way 1500ft = Includes two 1-button remote controls with a range of up to 1500 feet, plus a third lock from the OEM fob that also functions.
- 2 Way 3000 Foot = Includes 1 1-Button 1-Button and a 2-Way Remote The OEM fob’s 3x lock and a 1-way remote with a range of up to 3000 feet will also function.
- Start your automobile from anywhere in the globe with an app on your phone. Service Plan is necessary upon purchase or installation. Free for the first year, then $39.95 per year. (3x Lock will also function)
- Full House = You get everything! Use the 2-way 3000ft remote control, your smartphone, or your OEM key to start your vehicle from anywhere in the globe. Press lock three times. After purchase or installation, a service plan is required for the smart phone module. Free for the first year, then $39.95 per year.
How is a Hyundai Sonata 2022 remote started?
You are in for a treat if your Hyundai Sonata has a remote start. However, you must understand how to use it in order to make use of this functionality. The procedures are outlined below!
Follow these instructions to remotely start your Hyundai Sonata:
- Begin by using the Bluelink app or fob to lock the doors [even if the doors are already secured].
- Hold down the remote start button after that.
- Before the car starts, the headlights and turn signals will flash.
- After operating for 10 minutes, the Hyundai Sonata will shut off.
- Press the remote start button once more to stop the car.
No matter the weather, having a remote start is a useful feature. We’ll look more closely at how and when to use the remote start option in your Hyundai Sonata in this post. Continue reading for answers to more frequently asked questions about the Sonata’s remote start.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Is remote start available for the Hyundai Elantra 2021?
In contrast to its larger sibling, the Sonata, the 2021 Hyundai Elantra lacks remote start on any of the three trim levels of the key fob. Instead, using their Blue Link app, Hyundai provides remote start, climate control, and much more.
The Hyundai Elantra SEL is equipped with remote starting, right?
It does, indeed. Simply make sure your car is correctly connected to the BlueLink Connected Vehicle System and that the software has been downloaded and set up on your phone. With the help of this app, you can remotely turn on the heater and start your Elantra so that everything is ready to go when you step outside.
How can I tell whether the remote start on my Hyundai is working?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- Accord, Civic, and Insight from Honda
- GM automobiles (2003 – later)
- Honda Accord
- ZDX and TLX Acura (2010 – later)
- Tribeca, Legacy, and Outback Subaru models (2007 – later)
- Navara Altima
- Fusion and the Ford Mustang
- Corvette Camaro
Is remote start available on the 2022 Elantra N?
You may remotely start your Elantra N’s engine, unlock or lock the doors, control the temperature inside the vehicle, and more using a smartphone, smartwatch, or home assistant device.
Why am I unable to start my Hyundai Elantra?
The most frequent causes of a Hyundai Elantra key not turning are a stuck ignition switch, a binding steering column or lock, or an issue with the ignition key.
How can you use a key to start a Hyundai without a key?
Hyundai Digital Key, which enables the Sonata to be unlocked, locked, started, and driven with a smartphone, is a new feature that will debut on the 2020 Sonata. The technology also enables the main user to grant three additional users access to the Digital Key. A “shared key” can truly be sent to a recipient from a great distance away.
Holding your smartphone up to the driver or passenger door handle unlocks the car using Hyundai Digital Key. Simply put the phone in the wireless charger once inside, hit the starter, and drive away. Hyundai Digital Key uses Near Field Communication (NFC) technology for security, which, unlike Bluetooth, necessitates that the smartphone and scanner be a few centimeters apart in order to operate the vehicle. When you are nearby your automobile, nobody else can simply open the doors and start the engine because of the close proximity.
There is no Hyundai Digital Key for iPhones, however it is compatible with the majority of Android phones. The Hyundai Digital Key system may be configured using the free Digital Key App, which can be downloaded from the Google Play Store. Although you can lock and start your car without the app open, it also has Bluetooth-enabled features that let you do other things like engage other features when the app is open.
Hyundai Digital Key eliminates the need for the Sonata’s two smart keys, which still come with the vehicle and allow for passive entry and keyless start. Additionally, you’ll get an NFC Key Card that you can keep in your wallet and use as a backup phone for iPhone users, for valet services, while you leave the Sonata for maintenance, or if your Android phone runs out of battery.
Hyundai Digital Key, the most recent development in car and smartphone connection, makes its debut on the 2020 Sonata and will likely be a feature on upcoming models that Hyundai introduces or redesigns.
Does Hyundai have a car-starting app?
The Bluelink App: What is it? Hyundai Bluelink subscribers can connect to their vehicle via their phone via the Bluelink Mobile App. With the help of this software, you can remote start your car, turn on the lights and horn, unlock and lock your car remotely, and do a lot more.
How can I tell whether my automobile has a remote start from the factory?
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
The Hyundai Elantra SEL from 2022 has wireless charging, right?
With its wireless charging pad, the 2022 Elantra gives you the choice of charging your gadgets while you’re on the go. The Qi-compatible gadget only needs to be placed on the charging pad for hours of charging without the inconvenience of wires and cords.
What does my Hyundai key fob’s hold button do?
What does auto hold accomplish? It prevents your automobile from rolling away accidently when it is moving or stopped, thanks to the ABS/ESC hydraulic unit.