The oil service (oil change) light can be reset as shown here. Start the engine, let it idle for a few seconds, then press and HOLD the trip reset button for about a…
In This Article...
BMW 118i/120i (F20/F21) Service Light Reset, 2011–2019
Resetting the oil service lights on your BMW 1-Series F20/F21 just takes a few seconds. So let’s get started right away.
- First, after doing your service, get in the driver’s seat and depress the ignition switch without pressing the brake.
- Next, press and hold the TRIP button on the left for approximately 10 seconds to access the service reset screen.
- In order to navigate the service page and find the Engine Oil, press the TRIP button once more on the left.
- Hold down that button once more when you are on the screen you want to see; it will say Perform Reset?
- You must click the TRIP button once more until the message “reset in progress” appears to confirm it. And once everything is finished, the oil can will turn green.
How can the BMW Oil Service light be reset?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
How can the oil life on a 2008 BMW 128i be reset?
- With the engine off, set the ignition to the ON position (close all doors and windows and put the vehicle in park)
- The first service work will appear on the display after around 10 seconds of pressing and holding the TRIP reset button.
- To choose the required maintenance item to reset, use the ROCKER switch on the turn signal/main-beam switch (oil can indicates the oil change)
- Press and hold the turn signal/main beam switch’s on-board computer button until the word “RESET” appears to reset.
- By holding down the same button for a little while longer, the reset is verified.
- For any other services that need to be reset, repeat the process above.
Why is my oil light still on after I changed my oil?
Let’s move on to the car’s second oil light, the oil pressure light. When this light turns on, it indicates that the engine’s oil pressure has fallen, and you need to act right away. The engine of your car can suffer severe harm if you keep the light on while driving.
The light signifies that something is interfering with the engine’s ability to receive a continuous flow of oil from the oil pump to lubricate its components when it is operating normally. You can consider oil to be the vital component of your car’s engine. Your engine is protected from heat and friction with the right oil level. But without it, your engine can sustain damage quickly. Therefore, it’s crucial to routinely check your oil and filter. You must deal with it if the light comes on. Here is what to do.
- Turn off your engine and first pull your car securely to the side of the road.
- Next, locate the engine compartment of your car (often by lifting the hood) and check the oil level.
- To do this, take out the dipstick, clean it with a rag, then put it back in the engine and pull it out again to check the level. The oil level is low if it is below the “full” line. (If you are having difficulties locating the dipstick, refer to your owner manual.)
- If the dipstick does really show low oil, look for any indications that your car is leaking. A failing gasket or seal may be the cause of oil dripping. If there isn’t an obvious outward oil leak, the engine may have an interior issue.
Purchase the appropriate oil for your vehicle’s kind and weight, then refuel the engine until the dipstick reads “full.” If the light remains on even after you restart your car, get a professional opinion by calling for a tow truck.
After an oil change, why is my maintenance light on?
Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you can travel securely on roads and this light will notify you when it’s time for a fresh oil change after 5,000 miles without having to manually tally the miles.
Why does my oil-change light remain on even after I change my oil?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
Bring it in to see us at Craig Dunn Motor City if your oil light is still on after an oil change, or make an appointment for service right away online! Similarly, we can change the oil on your car if it needs it. Do you have any more inquiries? Please feel free to contact our staff right away!
How often should the oil be changed in a BMW 1 Series?
Your Routine for Oil Changes It is advised that BMW car owners get their engine oil and oil filter replaced after 10,000 miles or every 12 months. Although many manufacturers advise doing so every 5,000 miles or six months (whichever comes first)
How can I switch off my service light?
Locate the odometer reset button and press it with the ignition key removed (hold down) Start the engine (warning lights come on) wait for roughly 10 to 15 seconds until the lights are all off (still pressing odometer reset button) Remove key after turning ignition off while keeping the button depressed. Depress the reset button.
How frequently should a BMW 1 Series be maintained?
Full Service BMW 1 Series We advise having a Full Service performed on your automobile either every 12,000 miles or every 12 months, whichever comes first. A Full Service once a year can assist maintain the vehicle’s value and lower the danger of a breakdown.