You have a rolling code garage door if the HomeLink light began to flash. To finish programming
- Return to your Hyundai in 30 seconds, then push the HomeLink button three times to program it.
- If programming was successful, the garage door will open or close.
In This Article...
Owners of Hyundai, Begin Here
Trying to set up your Hyundai’s HomeLink? The steps you must take to quickly and easily train your HomeLink are explained in the video on the right side of the page. The most frequently required video will start playing immediately, however we have added manufacturer-specific movies below the main player for some garage door openers.
Not a fan of video? By selecting your vehicle’s model name from the list below, you may also get comprehensive instructions tailored to your particular model.
Choose your training films from the list below the main video for Hyundai owners who are using a Genie, Sommer, or an older model of HomeLink (model years 2008 and earlier).
a manual for setting up the buttons on your Hyundai garage door
- Press and hold the two outside garage door buttons (on the left and right) until you see the red light next to them start to flash while the garage door is closed and the car is parked outside.
- Next, choose whatever Hyundai garage door button you want to configure. Then, while simultaneously pushing and holding the HomeLink garage door button on your Hyundai’s rearview mirror, press and hold the corresponding button on your garage door device. Continue doing this until you notice the red light solidifying or rapidly flashing. If the flash is slow, the system is still in the programming phase.
- As a last step, verify that the button has been programmed. You can move forward if it works. If not, you should still use the instructions below because your garage door might use a rolling code system.
Without a remote, how do I program my Hyundai HomeLink?
In conjunction with the transmit button, press and hold the chosen HomeLink button. Hold these two buttons down simultaneously until you notice the HomeLink LED begin to flash significantly more quickly.
I need help setting up Hyundai HomeLink.
Press and hold the HomeLink(r) garage door button on your Hyundai rearview mirror while simultaneously pressing and holding the garage door button on your garage door remote control inside your Hyundai car. Hold down the button while waiting for the red light in your rearview mirror to solidify or start flashing quickly.
Hyundai Sonata: Does it feature HomeLink?
Visit our most recent guide for Hyundai vehicles made in 2018 or after as these instructions might not apply to more recent Hyundai models.
The HomeLink feature on your brand-new Hyundai Sonata is one of the coolest extra features around. It transforms your car into a wireless control system that lets you operate your home’s security system, turn on or off electronics or appliances inside, as well as open and close your garage door and front gate. Follow the instructions listed below to connect your Hyundai Sonanta’s HomeLink to your garage door and stop looking for the annoying garage button forever!
How do I set up the garage door opener on my Hyundai Sonata 2022?
- Double-click the HomeLink button you want to program.
- Exit your Hyundai and press the Learn/Smart button once on your garage door opener.
Why won’t my HomeLink function?
Interference close to the house or car, the use of stale batteries in the original transmitter during programming, or other factors can affect range.
- Your handheld transmitter needs a fresh battery. More power is drawn from the battery when the HomeLink(r) is being trained than when you press the doorbell button. It can occasionally assist the portable transmitter pick up a better signal and extend its range by replacing the battery.
- Retrain the HomeLink by moving it to various positions and angles. Hold the portable transmitter 3 to 4 inches from the buttons at first, then 5 to 6 and even 6 to 8 inches. This can occasionally aid in obtaining a stronger HomeLink signal.
- Make use of fresh batteries in a second transmitter.
- Adjust the antenna wire that hangs from the motorhead of the garage door opener.
The HomeLink button is what, exactly?
A widely used and trusted vehicle-based wireless control system is Homelink. You can use it to effortlessly open and close your front gate and garage door, turn on and off your home’s security system, and control your lighting, appliances, and electronics.
The HomeLink transmit button is not visible.
Your HomeLink buttons are normally found in the overhead console, center stack, or mirror of your car, but their exact location depends on the make, model, and year of your vehicle. Please consult your owner’s manual if you are unsure of where your HomeLink is.
How can I program the Hyundai Sonata’s garage door opener?
- Hold your old garage door remote within 3″ of the HomeLink buttons on your Hyundai model.
- Press and hold the HomeLink button you want to utilize as well as the button on your old garage door remote control.
- When the HomeLink indicator light flashes, hold both buttons.
Exists a HomeLink mobile app?
Install the App Now that HomeLink Connect(r) is available for iOS and Android, you can conveniently control all of your car-to-home automation devices from the front seat.
Which automobiles have HomeLink?
Numerous more technological components connect with advanced car technology. For added convenience, consumers who have smart home systems want to link their homes and vehicles. One system makes it simple for you to achieve that. Hundreds of automakers, including Audi, BMW, Chevrolet, Ford, Honda, Hyundai, Mercedes-Benz, and Toyota, include it as standard equipment in their vehicles. Additionally, it’s accessible as an aftermarket add-on.
It is known as HomeLink. Although the system has been in place for years, not everyone is aware of what it is or how to operate it. You may use it to access virtually any smart home feature simply pressing a button in your car.
How do you connect your automobile to a LiftMaster garage door opener?
You might need to take further steps to connect your garage door opener and your car’s HomeLink system if the following instructions didn’t work.
Find the learn button on your garage door opener first. This gadget is in charge of conveniently clearing the machine’s memory or configuring remote controls and garage door accessories. The learn button for a LiftMaster garage door opener is typically a red, orange, green, purple, or yellow button on the device’s back panel.
Try these steps to connect your HomeLink buttons to your garage door opener after you’ve found the learn button on your opener:
- Press and then let go of the learn button on your garage door opener.
- Press and hold the HomeLink button on your car for 30 seconds.
- The car will be connected to the machine’s signal by holding down the HomeLink button.
- The light on your LiftMaster machine will blink once if the pairing was successful.
- By pressing the button inside your car and watching for the door to open, you may test the system.
Has HomeLink got a battery in it?
Simple to Program: HomeLink(r)’s Quicktrain technology, available in some cars since 2007, finds and syncs with the code of the original transmitter. Programming is straightforward and quick even without Quicktrain.
Convenient: HomeLink is constantly present and prepared to act on your direction. No more looking around for the garage door remote.
Versatile: Regulates property gates, garage doors, interior and outdoor lighting, alarm systems, and more.
Battery-free: HomeLink never needs batteries because it is powered by the electrical system in your car.
Without a remote, how can I connect my garage door to my car?
- First, get to the garage door opener’s motor unit. A ladder is required for this.
- Find and click the “learn” button. The keyboard will come to life. Enter your chosen code at this time. Watch for the LED to start blinking.
- Press the learn button once more and enter your new code after the blink. See whether it functions.
Why is the red HomeLink light on?
When you press it again, the light ought to be red. This indicates that your 3-button remote is now prepared for HomeLink(r) system programming.
Which button on a Chamberlain garage door opener is the Learn button?
Your garage door opener’s “Learn” button can be found above the antenna wire that hangs from the motorhead or it could be hidden by a light cover. There will be a green, red/orange, purple, or yellow “Learn” button.