When the car’s lights start to flash, press and hold the “Open” or “Unlock” button on the keyless entry FOB. Your Hyundai vehicle has now been reconfigured to the keyless entry FOB.
- Only Hyundai keyless entry FOBs that have already been programmed can be reprogrammed using these keyless entry FOB programming instructions.
- Toyota key
- Keyless entry FOB previously programmed for a Hyundai
- Not all Hyundai car models may be compatible with these setting recommendations. For assistance with programming a keyless entry FOB for a specific model, speak with your nearby Hyundai dealership or service center.
In This Article...
Basics of programming Hyundai keys
The majority of Hyundai cars produced after 1999 need to be programmed in order to start. That includes remote controls and transponder keys.
Regular metal keys, often known as non-transponder keys, just need to be cut in order to start a vehicle; no programming is necessary.
Here, we’ll discuss the various key types and demonstrate how you may significantly reduce the cost of replacing a lost or misplaced key.
Making a new key to start the car essentially involved two stages:
Making a new key, A
This entails making a blank key that may be used to turn the ignition to the “ON” or “RUN” position. You might ask a locksmith or the dealer to cut the key for you. Remember that you will need to present ownership documentation and the VIN.
The majority of Hyundai vehicles produced during the last 20 years include some form of transponder security system.
In order to start the car, the key or remote control must be programmed. The word “programmed” indicates that the computer in the car must be able to identify the key as a “approved key.”
The dealer or the majority of automotive locksmiths have specialized programming machines that can be used to add authorized keys to existing keys.
A dealer or a locksmith can program the key for you. An on-site service can be offered by a locksmith.
If you decide to go with the dealer, a tow will be required if all of the keys are lost.
When you’ve misplaced all your keys and are unable to start the automobile, the programming process might be very time-consuming.
In the event that you do require a new key, we have compiled some crucial advice for you here. For additional details, continue reading.
How is a Hyundai key fob programmed?
I believed I could change my key fob’s battery on my own when it died. Even though I thought I followed the instructions precisely, my car still isn’t compatible with it. How is a Hyundai key fob programmed?
In less than two minutes, find out if your auto insurance is being overcharged.
Unfortunately, you always need to reprogram your key fob to your vehicle after changing the battery in order for it to function again. Fortunately, setting up a Hyundai key fob is really simple.
This is how to set up your Hyundai key fob:
- First, go into your car and shut all the doors.
- To activate the ACC function on your car’s ignition, use your key.
- Your key fob’s unlock button (which is occasionally also the open button) should be pressed and held down for a few seconds.
- A light will flash to signal successful programming, typically one of your car’s danger lamps.
You can now let go of the button and check your key remote! You should be prepared to move once it has synchronized with your car once more.
Jerry can be used to check if your auto insurance is current before you leave. Jerry, an authorized insurance broker, offers you a quick and simple way to compare rates from reputable companies like Geico, Progressive, and more.
It’s hardly surprising that Jerry is the top insurance app with an average annual savings of $887 in auto insurance.
How do I set up my remote for keyless entry?
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position.
This notifies the electronic control modules in your automobile that the signal is coming from your key in the ignition, and it then saves the information.
How can I set up my Hyundai key fob to work with my vehicle?
- As soon as you get inside your Hyundai, check that all the doors are closed.
- Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
- Congratulations
Can you do it yourself to program a Hyundai key fob?
Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.
There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.
How do I make my Hyundai smart key functional?
You must already have a MyHyundai account set up and the Digital Key app downloaded on your phone in order to use Hyundai Digital Key. If you’ve already completed these steps, make sure you have the Digital Key Smart Card that was provided when you bought your Hyundai vehicle on hand.
- Go to the Digital Key app’s primary menu.
- If your Hyundai isn’t already running, start it.
- Press the + button to begin pairing in the Digital Key app.
- Your Android device should be placed on the wireless charging pad.
- Await the phone to complete pairing.
Once you begin the pairing process, this procedure will finish on its own.
- (For Hyundai models lacking a navigation system) Choose the following choices on the instrument cluster display of your Hyundai car, in this order: Smartphone Key, Digital Key Choose, Save
- (Applicable to Hyundai cars with navigation) Choose the following choices on the navigation screen of your Hyundai vehicle in the following order: setup, vehicle, smartphone key, digital key, pick, and save
That’s all, then! The Digital Key app for smartphones is now functionally equivalent to a Smart Key fob.
Can I program my own car key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
I need help pairing my Hyundai key.
It is recommended that you always keep your NFC (Near Field Communication) Key Card on hand as a backup key in case your smartphone experiences a power outage or other problem. The card resembles a hotel key card and may therefore be conveniently stored in a wallet or billfold. The NFC Key Card will also need to be associated and registered with the automobile in order to function as a backup digital key. If the card hasn’t already been associated with the car, please follow these steps:
- Start your car.
- Make sure the Hyundai Digital Key app is installed on your primary smartphone and that it is in the car.
- Pick Pair NFC Key Card through BLE from the side menu in the app.
- the wireless card changer with your card in it.
- There will be automated pairing.
Follow these steps to finish the registration procedure for models having a navigation screen:
What is the cost of programming a keyless remote?
The price to reprogram a fob is determined by a number of factors. Although it’s difficult to provide a general price, reprogramming often costs between $50 and $250. Here are some elements that can affect price:
- Type of Fob: Reprogramming smart keys with a transponder (RFID), keyless ignition, or other additional features is typically more expensive.
- Vehicle Brand: Manufacturer-specific fob complexity varies. Some automakers make it more difficult to reprogram keys.
- Vehicle Model: Within a given automaker, some models feature key fobs that are more complicated than others.
What is the cost for programming a key fob at Hyundai?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
Can automobile keys be programmed at Walmart?
Any auto dealership or after-hours locksmith can assist you with getting your transponder keys replaced. Walmart, sadly, is not one of the places that can exchange transponder keys.
Walmart ideally offers a simple method for replicating automobile keys, so if you have an older vehicle, this is the place to go.
Owners of new automobiles with electronic key fobs, however, won’t be able to get a precise duplicate created at Walmart. Most retailers, including Walmart, lack the technology necessary to duplicate the systems included into your car key.
Additionally, most automakers take extra precautions to prevent businesses like Walmart from being able to duplicate your chip keys. Additionally, they oppose you seeing a locksmith for a replacement.
They would prefer that you go to your local car dealership. Manufacturers would profit if you visited the dealership because it is more expensive to have new keys made there.
Additionally, automakers do not want hackers to be able to quickly decode their encoded structures. Because of this, every vehicle has a unique code that can be encoded into new keys at the dealership.