Your remote’s “Lock” button must be depressed and held for a full minute. This enables communication and synchronization between the control module and remote. Turn the memory switch in the control module back to the “Off” position after releasing the “Lock” button.
In This Article...
Aftermarket Hyundai Sonata Smart Remote Key Fob
- One brand-new, aftermarket 2011 Hyundai Sonata Smart Keyless Entry Remote (it DOES NOT have a logo on the back), together with an uncut emergency insert key, is supplied.
- This transmitter is compatible with cars that have proxy keyless entry systems and dashboard push-to-start/stop buttons.
- The price listed above is for one replacement keyless entry unit with the spare key.
How can I program my 2011 Hyundai Sonata’s key fob?
For this car, there is no onboard programming process. To program the keyless remote for this car, additional equipment must be attached to the vehicle. Before going to the dealership, try a locksmith; their prices are typically 50% lower. Use the suggested locksmith locator on our website to find a preferred locksmith nearby:
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
How is a Hyundai Sonata key fob programmed?
- As soon as you get inside your Hyundai, check that all the doors are closed.
- Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
- Congratulations
Can I customize my Hyundai key fob myself?
Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.
There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.
Without the original, how can a key fob be programmed?
After locking every door, turn the ignition off. Set the accessory or “ACC” position on the ignition key. The door locks will cycle once once you turn the ignition key off once more. To program the key fob, press any button three times straight.
Has a 2011 Hyundai Sonata’s key been chipped?
The good news is that, up to the later years beginning in 2010, your key has no extra functions and is a very straightforward key to get a replacement for if you’ve lost your Hyundai key and don’t have a spare. In none of the models, the Hyundai Sonata key has a high security key.
For models made in 2011 and later: Your Hyundai Sonata contains a transponder key, also known as a chip key, that must be programmed to your Hyundai Sonata in order to be able to start the engine. These models include 2011, 2012, 2013, 2014, 2015, 2016, and 2017.
Between 2010 and now: If your Hyundai Sonata was manufactured in any of the following years: 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010, you have a standard key with no additional features or security other than the key itself.
It is usually a good idea to phone the Hyundai dealer and inquire about costs, offerings, and availability first. The type of service provided differs significantly between Hyundai dealerships and a locksmith business. If you’re obtaining a new key from the dealer, you’ll either have to tow your automobile if it’s a new model from 2011 and up to the dealer to get the key. Whatever it is, it will take longer and may be more expensive to complete than hiring a locksmith.
The second choice is to contact a reputable locksmith business. In order to offer you with complete service at the location of your automobile, a locksmith business will be able to send you a service van loaded with all the necessary tools, including key cutting and key programming devices. After you contact, the majority of locksmiths can send you a specialist right away.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.
Does programming a key fob require two keys?
Moderator Super. No, you don’t need any previously programmed keys at all. Instead, the process establishes only the pairings that are part of the process and erases any prior pairings.
What is the price of a brand-new Hyundai Sonata key fob?
- The kind of key you require
- The year that the vehicle was made
- the time of day and where you are
- where to obtain a replacement key (dealer, automotive locksmith, online, etc.)
- access to the code needed to create a new key
- or not the initial ignition
Why won’t my Hyundai key turn?
If it isn’t, reopen the case and check to make sure the connections are intact and touching the battery in the proper location. Try reprogramming your Hyundai key fob after that. Hyundai key fob replacement may be necessary if the key fob is still inoperable.
Where is the Hyundai Sonata’s smart key holder located?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
What does the Hyundai key fob’s hold button do?
What does auto hold accomplish? It prevents your automobile from rolling away accidently when it is moving or stopped, thanks to the ABS/ESC hydraulic unit.
I need help pairing my Hyundai key.
It is recommended that you always keep your NFC (Near Field Communication) Key Card on hand as a backup key in case your smartphone experiences a power outage or other problem. The card resembles a hotel key card and may therefore be conveniently stored in a wallet or billfold. The NFC Key Card will also need to be associated and registered with the automobile in order to function as a backup digital key. If the card hasn’t already been associated with the car, please follow these steps:
- Start your car.
- Make sure the Hyundai Digital Key app is installed on your primary smartphone and that it is in the car.
- Pick Pair NFC Key Card through BLE from the side menu in the app.
- the wireless card changer with your card in it.
- There will be automated pairing.
Follow these steps to finish the registration procedure for models having a navigation screen:
How do you connect a car with a key fob?
- STEP 1: Start the engine. All doors should be closed, and you should be seated in the driver’s seat with the key fob and the ignition key.
- Press the lock button in step two.
- Turn off the ignition in step three.
- STEP 4: Repeat Step 3 with more key fobs.
- STEP 5-Start the procedure over.
Why doesn’t my automobile recognize my key fob?
Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.
How much does it cost to program a key fob?
What is the cost of programming a key fob? The typical person who programs key fobs is a locksmith. Typically, key fob programming costs between $85 and $400. Nowadays, most cars come standard with key fobs, often known as remote fobs.
After changing the battery, does the key fob need to be reprogrammed?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
O’Reilly does key fobs program?
Over 20 million keys are typically lost by Americans each year! You know how frustrating it can be until you get a replacement key produced if you’ve ever lost the key to your house, apartment, car, motorcycle, or RV and didn’t have a spare. Since hiring a professional locksmith can occasionally be expensive, you might be wondering where else you can order keys.
Car keys of many kinds and models are produced by O’Reilly Auto Parts. They can configure your remote keyless entry system and transponder key as well as build and sell key fobs. The keys can be ordered online.
Since there are thousands of O’Reilly Auto Parts locations around the country, going there to get a key produced is quicker and easier than finding a locksmith. They have self-serve kiosks and provide key-cutting services. Discover what keys O’Reilly Auto Parts makes, sells, and how to order one by reading on.
Are automobile keys programmed at Home Depot?
Although Home Depot is largely a home improvement business, they also manufacture automobile keys and can program transponder keys and key fobs. The cost of keys can range from $2 to $169 depending on the make and model of your car.
However, in order to use the key duplication service offered by Home Depot, you must have a functioning car key for them to copy. The best and least expensive solution if you’ve lost your key is to go to a locksmith.