NOTE: According to some, leaving the key out of the ignition is effective for their vehicle. Try skipping this step if this process doesn’t work for you.
In This Article...
Step 3: Enter Programming Mode
SLIDE the switch on the alarm system control module to the SET position after 5 seconds.
- Setup the remote
- Programming a second remote
- Out of the programming mode
PULL THE SWITCH ON THE CONTROL MODULE FOR THE ALARM SYSTEM TO THE OFF position. To exit programming mode, turn off the ignition, remove the key, and replace the center fascia.
- Try the remotes
- Share
Please think about telling your friends and family about our website if these programming tutorials helped you save time and money so they can do the same.
Notes about programming:
- Check the following before implementing these guidelines:
- Keyless entry is available in your car, and
- Your car is compatible with the key fob remote you have.
- Securing EVERY remote transmitter for this car.
- Location of the Keyless Entry Control Module:
- Access the alarm system control module behind the driver-side fascia panel of the Santa Fe/XG300/XG350 (Fig 100573)
- Important: Be sure to double-check that you can locate the Alarm Control Module and related SET Switch specified in the instructions, or else you won’t be able to follow the self-programming instructions and will need to have an automotive locksmith program the key fob for you.
- Alternative: If these instructions don’t seem to work, try repeating them as directed in Steps 2 and 7 WITHOUT turning the ignition on to see if it fixes the problem.
How do I program a key fob for a 2006 Hyundai Sonata?
Know how to program a Hyundai Sonata key fob as well. Insert your Hyundai’s key into the ignition cylinder of the car. Set the ignition to the “ACC” or “Accessory” position by turning the key. When the car’s lights start to flash, press and hold the “Open” or “Unlock” button on the keyless entry FOB. Your Hyundai vehicle has now been reconfigured to the keyless entry FOB.
Can I program my own Hyundai key fob, furthermore? In order to have a skilled technician program the key fob to your vehicle if you are buying a new Hyundai, you must go to a Hyundai service center. Although reprogramming your Hyundai’s key fob is rather straightforward, if you have any concerns or need assistance, the professionals at our store are always here to help.
Instead of paying the dealer $236.45, we spent just $79.95 for an authentic Hyundaifob that has the Hyundai emblem on the back. The catch was that a dealer or locksmith had to program this sophisticated “smart” key fob.
How To Set Up The Hyundai Keyless Remote
Reprogramming your Hyundai keyless remote system should begin with getting inside the car and locking all the doors. Second, activate the “ACC” auxiliary function on the Hyundai’s ignition system with your key. Third, you’ll see a button on the key fob with the words “unlock” or “open” on it. On the key fob, press and hold this button for a number of seconds. A light on your automobile will start flashing when the programming is finished to let you know that it was successful.
How is a key fob for a 2004 Hyundai Sonata programmed?
1. Locate the alarm system module and flip the memory switch to the Off position before removing the plate covering the radio.
2. Put the key in the ignition and switch it to the “On” position. Turn the memory switch to the Set position after waiting five seconds.
3. On the remote that is being programmed and on all additional remotes, press lock.
4. Switch off the memory switch and turn off the ignition.
5. Replace the alarm plate, then test the remotes.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Was this Knowledgeable? Please spare a second to Like, Follow, and Share on the social networks listed below. People like you aid in getting the word out about us. It is extremely beneficial! We appreciate you coming and spreading the word to your loved ones.
How is a Hyundai Sonata key fob programmed?
- As soon as you get inside your Hyundai, check that all the doors are closed.
- Put your Hyundai’s ignition in the “ACC” (accessory) position using your key.
- Keep pressing the “open” or “unlock” button on the key fob until the light on your car starts to flash.
- Congratulations
Can you do it yourself to program a Hyundai key fob?
Only a specialized programming machine may be used to program all Hyundai transponder keys and remote controls. Therefore, the keys can only be programmed for you by a dealer or locksmith.
There is, however, a way to reduce the cost and make the process more accessible. You can find instructions on how to do that in the sections below. It shouldn’t need much of your time and can help you save a ton of cash.
Where is the Hyundai Sonata’s smart key holder located?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
Without my original car key, how can I program my new one?
- Launch Ignition. Put the key in the ignition while seated in the driver’s seat.
- Wait. For 15 minutes, the security light must be on.
- Turn on and off. After 15 minutes, the security light ought to turn off.
- Recurring Steps
What is the cost for programming a key fob at Hyundai?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
Can I program my own car key?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- Thirdly, repeat the procedure.
- To program the key, turn it back to the on position.
- In order to test your new key, start the engine.
How do I re-set my Hyundai’s central locking?
Your remote’s Lock or Unlock button should be pressed and held until the remote’s LED light starts to flash.
Can any key fob be programmed to any vehicle?
I was wondering whether it was feasible to reset or overwrite that key fob to my vehicle because I have a used remote control with the same button configurations (including remote start). I presently only have one remote that is set up for the automobile.
I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:
- The key fob’s battery should be removed and then replaced (unless you put in a new battery)
- After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
- Turn the key to the aONa position after inserting it in the ignition.
- The key should be in the aOFFa position.
- Using both your hand and the remote control, lock the door after turning the key to the aONa position.
- While simultaneously using the remote and your hand to unlock the door, turn the key to the aONa position.
- Remove the ignition switch’s key.
- the driver door with the key.
- Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
- Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
- Put the key in the ignition switch and attempt to start the engine if the doors will lock.
After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.
The informative nature of the aforementioned claims warrants independent verification. kindly visit our
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.