I’m going to use a short YouTube video I previously made to demonstrate how to reset your service lights. All you need to do is push a few buttons on your car, no tools or other equipment are needed.
the following steps:
Press the start button after inserting a key into the ignition. Hold off until every check-light and beeping has stopped. To reset the odometer, press and hold the brake pedal until a yellow triangle appears. After that, let go of the odometer reset button and use the scroll on the left side of the steering wheel to locate the icon you wish to reset the service light for. The reset light will turn on when you press the top button (the BC button) on the left control handle. Press it once more and hold it for a little while. That ought to finish it. Until you have completed everything that needs to be done, you can scroll. Take a keyfob out once you’re finished, and you’re all set to go!
Excellent Post—it took a few tries to get the sequence just right, but the final result (3 minutes) worked flawlessly! Continue the excellent work!
Make sure to keep holding the brake and odometer through the yellow triangle so that the service reset menu will automatically open.
MANY THANKS TO DIMSUM!!!!! I recently had an AC icon crop up, and I just reset it today after seeing your video. In addition, the closest dealer is 1500 kilometers away. I believe I owe you a case of beer, but we are on the opposite end of the city. I was raised on the west shore. Anyway, I appreciate it very lot.
The “not sure what this is” is an emissions and roadworthiness test. This is more of a reminder to schedule an inspection and emissions test for your state, county, municipality, etc. than it is evidence of a problem. I appreciate the reset details…
In This Article...
How Do I Fix A BMW Service Light That Won’t Reset?
Depending on the type, model, and year of the car, there are various approaches of turning the service light on or off in a BMW. Normally, you may reset the service light through iDrive or by using the trip miles, BC, and stalk buttons on the headlight control switch on the dash.
Even if you’ve already seen a mechanic for a diagnostic, it’s always a good idea to be knowledgeable about what can be wrong with your automobile because you know your car better than anybody and can play a significant role in assisting a mechanic in correctly fixing your car.
The good news is that there is almost always a DIY solution to problems like these.
Oil Reset for BMW 3 Series E90/E91/E92/E93
BMW 3 Series with oil reset Models E90/E91/E92/E93 (316d,316i,318d,318i,320d,320d ED,320i,320si,323i,325d,325i,328i,330d,330i,335d,335i,335is,M3,M3 GTS) from 2004 to 2013 are covered for the entire year.
- With the engine off, set the ignition to the ON position (close all doors and windows and put the vehicle in park)
- Press and hold the brake pedal and the TRIP button until the warning triangle displays after allowing all of the warning lights to turn off and the warning tone to cease beeping.
- As soon as the warning triangle appears to show the first service symbol, immediately release the TRIP button.
- Cycle through the service items using the BC button on the turn signal switch until the oil change icon appears.
- Hold the BC button down for three to five seconds until the word “Reset” shows on the display.
- When the time clock appears on the display once more, release the BC button and press and hold it for another 3 to 5 seconds.
- To return to the service item screen, let go of the button.
* Reset any additional services by using the same procedure as above (Reset your oil life counter, brake life counters, and many others)
- Turn the ignition to the OFF position and let off of the brake when all resets have been completed.
How can I turn a BMW’s brake fluid light back on?
Regardless of whether you want to reset the brake fluid light, oil service light, or any other warning light, press the button (without holding it down) until the menu appears. Repeat steps 4 and 5 from the above instructions up until all warning lights are successfully reset.
To be certain, consult your owner’s manual. Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message asks “Reset?” release the button, then press and hold it once again.
However, if you have the maintenance done at a mechanic shop, the technician will reset the light for you; however, if you conduct the work yourself, you will need to reset it. Then you must buckle your seatbelt, fasten the door, and get in the automobile. Next, press and hold the left dash button.
After an oil change, how do I reset the BMW computer?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
What does the BMW 325i’s service engine soon light mean?
When the check engine light on your BMW 325i starts flashing, it indicates an urgent need for repair, therefore you should bring your car in right away. A flashing light signifies a dangerous issue that, if not addressed right once, could do significant harm to the car.
How can I remove a BMW service alert?
- Start the electrical systems of the car, but do not start the engine.
- Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner.
- When the message says “Reset,” let go of the button and press and hold it once more.
How can I stop the service engine soon light from flashing?
What should I do to make the service engine soon light turn off? Most of the time, you just need to fix the issue that was the root of the service engine light, and it will go away on its own. You must use a diagnostic scanner or a specific method specific to your automobile model to reset the light if it appears as a result of scheduled maintenance.
What brings on the service engine soon light?
The Service Engine/Check Engine When there is a problem with the fuel system, ignition, transmission, or emissions, a warning light will soon come on. This indicator does not merely indicate that you require routine maintenance.
Is BMW check engine the same as service engine soon?
- When something prevents the engine from operating properly, SES lights illuminate.
- Since there is only one light, testing is the only way to determine whether there are various problems.
- Your transmission may also be involved if your service engine soon lights are on.
- The SES light’s presence signals a performance decline. (Emissions and engine performance are closely related. Because of the SES, your vehicle will not pass the emissions test.
- Your engine needs maintenance, as indicated by decreased performance, the check engine light, and the service engine soon indicator.