the following steps:
Press the start button after inserting a key into the ignition. Hold off until every check-light and beeping has stopped. To reset the odometer, press and hold the brake pedal until a yellow triangle appears. After that, let go of the odometer reset button and use the scroll on the left side of the steering wheel to locate the icon you wish to reset the service light for. The reset light will turn on when you press the top button (the BC button) on the left control handle. Press it once more and hold it for a little while. That ought to finish it. Until you have completed everything that needs to be done, you can scroll. Take a keyfob out once you’re finished, and you’re all set to go!
Excellent Post—it took a few tries to get the sequence just right, but the final result (3 minutes) worked flawlessly! Continue the excellent work!
Make sure to keep holding the brake and odometer through the yellow triangle so that the service reset menu will automatically open.
MANY THANKS TO DIMSUM!!!!! I recently had an AC icon crop up, and I just reset it today after seeing your video. In addition, the closest dealer is 1500 kilometers away. I believe I owe you a case of beer, but we are on the opposite end of the city. I was raised on the west shore. Anyway, I appreciate it very lot.
The “not sure what this is” is an emissions and roadworthiness test. This is more of a reminder to schedule an inspection and emissions test for your state, county, municipality, etc. than it is evidence of a problem. I appreciate the reset details…
In This Article...
BMW 318i, 320i, and 335i (E90, E91, E92, and E93) Oil Light Reset, 2007–2013
I’ll demonstrate in this section how to reset the service intervals on your car when they approach. Therefore, it may be for the brake pads, brake fluid, vehicle check, or engine oil, for instance. As a result, you should:
You want to start the engine, but you turn on the ignition.
First, I’m not going to put my foot on the brake or clutch; instead, I’m only going to hit the START button once to turn on the dash light.
Press and hold the RESET MILES button.
You need to simply hold down the button on the left side of the dash that you typically press to reset your trip if you want to accomplish this. Therefore, press it in until a service item appears on the screen.
- To scroll the service minders you want to reset, momentarily press the UP or DOWN button on the stalk.
Using the orV button on the turn signal lever, you can scroll between the various things once the service item appears. I’ll scroll down now, and as you can see, it will say things like front brakes, vehicle check, oil brake, fluid brakes, front brakes, etc.
Keep holding down the BC button.
You must put the Engine Oil icon on the screen because we will be resetting the oil. It will then prompt you to reset it now if you continue to press down the BC button on the stalk.
To finalize the reset, let go and then hold it once more.
Then you must press and hold the BC button one more. After a brief timer appears and resets, you are finished.
For your information, this operation is for the fifth-generation BMW 3-Series, model numbers E90, E91, E92, and E93 (1997, 1998, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 model years). You can access the most recent model here.
What is a BMW Oil Service reset?
My uncle, a retired technician, recently changed the oil in my BMW. The maintenance light is still on, so I suppose he forgot to turn it off. How can I turn off the BMW’s oil-change light?
In less than two minutes, find out if your auto insurance is being overcharged.
- Don’t start the engine after turning the ignition on. You should hit the start button instead of depressing the brake pedal if your car has a push-to-start system.
- The service menu will show if you continue to depress the trip reset or odometer button on the instrument cluster. The reset button is normally located to the left of the speedometer, and pressing it for around 10 seconds should bring up the service menu.
- To discover the oil change notice, use the reset button to scroll through the settings. Press the reset button after that.
- Depending on the model, you might have to scroll through the options using the controls on the turn signal lever until you come across a prompt asking you if you’d like to reset the warning. Then, to reset the turn signal, press the BC button at the lever’s end.
- When prompted, press and hold the reset or BC button until the display indicates that the device is resetting.
You can save money on automobile expenses by having friends or relatives work on your vehicle, but employing Jerry can help you save money on extra expenses like auto insurance. The typical user of Jerry saves $887 annually on auto insurance.
Don’t be afraid to alter insurance or payment plans because you’re concerned about the extra labor. Jerry takes care of all the paperwork and even assists with canceling your previous insurance! Additionally, you can text one of our agents using the app if you have any questions along the route. They’ll be there for you whenever you need them.
How can the BMW service reminder be reset?
Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner. When the message asks “Reset?” release the button, then press and hold it once again. Press and hold the button while releasing it once more. “Reset in Progress” will be the message displayed.
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
How can my oil sensor be reset?
Clean the oil filler cap if you can. Use the BC button to cycle through the selections on the gauge cluster until the oil level reading appears. After that, hold the BC button down until the clock appears, indicating that the gauge cluster is resetting. only possible when the car is idle and at operational temperature
On a BMW, how do you reset the red exclamation mark?
Start the engine, then move through the obc until you find the word RESET next to the “flat tyre” sign. To choose, press the stalk’s tip. A tick should display after about 5 seconds of pressing and holding; just drive away, and it will reset itself. Don’t wait for any confirmation because there are no other signs that it has done it.
All owners and aficionados of BMW’s 1 and 2 series have their own forum community. Join the conversation regarding performance, customizations, classifieds, troubleshooting, maintenance, and more!
What does a 2011 BMW 328i’s “service engine soon” message mean?
- Needs Oil Changes: When it is time for an oil change, your BMW service engine light will on. The goal is to inform you when the time and mileage limits for your current oil have been reached. If you keep using your engine without changing the oil, even the best repair shop won’t be able to fix it.
- Low Oil or Other Fluid Levels: The service engine light also warns of low transmission fluid, coolant, or oil levels. Due to these low levels, this safety feature works to protect your car’s components.
- Regular Scheduled Maintenance: The computer in your BMW is preprogrammed with the timings for your regularly scheduled maintenance. The service engine soon light signals that your car needs to be taken in for its scheduled maintenance.
Your BMW will live longer and retain its value if you have routine maintenance done on it. You will eventually harm your car’s engine and other parts if you neglect any regular maintenance.
With the right preventive maintenance, a well-built car like a BMW can last for hundreds of thousands of kilometres. If your service engine light turns on, consider it a chance to save money and ensure you have a dependable car to drive for many years.
I recently had my oil changed; why is the oil light on?
Let’s move on to the car’s second oil light, the oil pressure light. When this light turns on, it indicates that the engine’s oil pressure has fallen, and you need to act right away. The engine of your car can suffer severe harm if you keep the light on while driving.
The light signifies that something is interfering with the engine’s ability to receive a continuous flow of oil from the oil pump to lubricate its components when it is operating normally. You can consider oil to be the vital component of your car’s engine. Your engine is protected from heat and friction with the right oil level. But without it, your engine can sustain damage quickly. Therefore, it’s crucial to routinely check your oil and filter. You must deal with it if the light comes on. Here is what to do.
- Turn off your engine and first pull your car securely to the side of the road.
- Next, locate the engine compartment of your car (often by lifting the hood) and check the oil level.
- To do this, take out the dipstick, clean it with a rag, then put it back in the engine and pull it out again to check the level. The oil level is low if it is below the “full” line. (If you are having difficulties locating the dipstick, refer to your owner manual.)
- If the dipstick does really show low oil, look for any indications that your car is leaking. A failing gasket or seal may be the cause of oil dripping. If there isn’t an obvious outward oil leak, the engine may have an interior issue.
Purchase the appropriate oil for your vehicle’s kind and weight, then refuel the engine until the dipstick reads “full.” If the light remains on even after you restart your car, get a professional opinion by calling for a tow truck.