Taping the area around the insignia on the hood to safeguard the paint while removing it is optional. Using a cloth under the pry tool to prevent scratches is another option for protection. To make the removal process simpler, choosing the appropriate pry tool is essential. To fit beneath the symbol, the tip must be extremely thin. To prevent scratching your paint, we advise sealing the tip of a thin flat head screwdriver with masking tape. For further information, see the images below.
Pry up the old insignia first, then work your way around it until it begins to lift up evenly. Simply grip and pull after it has been raised high enough for you to pick it up with your fingers.
Two mounting tabs on the underside fit into plastic grommets on the underside. Along with the symbol, these two grommets should be replaced. The grommets will become loose as a result of drying out and cracking. While driving, a loose hood emblem could cause the emblem to fly off.
Use needle tip pliers to pry out the plastic grommets to remove them. Now that the hood emblem and both grommets have been removed, the hood may be cleaned. It’s possible that the old symbol had salt, sand, or dirt trapped underneath it from normal driving conditions.
After cleaning the hood, start placing the new grommets into position. Align the tabs of the new BMW hood emblem with the grommets now. The margins of the emblem should fit snugly with no gaps between them and the hood. The installation is now finished.
In This Article...
How to Replace the BMW Hood Decals (aka Roundel Emblem)
The roundel emblems on the hood and trunk of a BMW are one of its distinguishing characteristics. When you initially buy a new car, these decorations are attractive. However, with continued exposure to the sun’s UV rays, they may eventually deteriorate, possibly cracking and fading. A replacement emblem can be purchased for $5 to $35 on eBay and other internet retailers, making it more inexpensive than many other auto components. Once you have a fresh symbol in your possession, you may swap out the old one for the new one in a matter of 10 to 15 minutes.
Even though an 82mm ornament diameter is the norm, BMWs DON’T always have the same size ornament. To confirm the part you require, you can use a tool like RealOEM. Take off the current emblem and check the rear for the OEM part number as a last resort if you can’t figure out what part you need. In this manner, you will be aware of what you require whether you buy an OEM or aftermarket part.
Both the emblem and two mounting grommets must be purchased. You are prepared to start this BMW repair once you have the necessary parts and tools.
Tools:
- Sharp-nosed pliers
- tape masking
- razor-sharp flat-head screwdriver
- a plastic pry bar
Step 1: Tape the area around the BMW symbol to protect the paint as you remove it from the vehicle. Placing a towel beneath the pry tool while you work will also prevent scratches on your car. Make sure to use a pry tool that is as thin as possible because it will have a significant impact on how easy the replacement process is. Masking tape must also be applied on a flat-head screwdriver if you choose to use one to prevent scratching the paint.
Step 2: Use the prying tool to start removing the ornament that is currently attached to your car once you have all of your tools nearby and everything is secure. As you loosen the symbol, move it around so that it remains comparatively flat. Once you’ve mostly freed it, you can use your fingers to complete the removal.
3. Mount the ornament by inserting the tabs on the back of it into grommets. When replacing the emblem, it is a good idea to go ahead and install new grommets. The plastic grommets, which naturally begin to wear and split with time, endanger the stability of the ornament and may even cause it to come loose from the car while you are driving (which is dangerous, although not as bad as a poorly secured tree flying off it).
Step 4: Remove your BMW’s grommets using your needle nose pliers. The grommets and decoration should have been taken off by this stage. Cleaning is best done now because it’s likely that over time, dirt or other debris have gotten caught under the emblem.
Step 5: Now that everything has been put away, you can simply press your replacement grommets into place. Align the symbol so that you may attach the grommets with its tabs. Make sure there is no space between the hood and the decoration at all.
How much does a new BMW emblem cost?
BMW features two distinct emblems, one that adheres to itself and the other that is more conventional and utilizes grommets and pins. The cost of both insignia is the same, or about $43. Add another $2 or so for the additional grommets needed for the classic badge.
There are several aftermarket alternatives available online if you desire an emblem with a little more distinctive design. They range from $20 for inexpensive eBay replacements to $200 for Swarovski crystal-encrusted roundels.
The size of all BMW bonnet emblems is uniform.
The quick response is a resounding “no.” BMW has its moments despite being a “no-nonsense German brand.” For instance, you’d assume they’d make the BMW insignia uniformly sized. That’s not the case, though.
BMW emblems are not only not all the same size on one model, but they are also not all the same size on different models. As a result, the steering wheel emblem and wheel badges are even smaller than the trunk badge, which is smaller than the hood badge.
There’s a good probability that nobody knows why each automobile has a BMW insignia in one of four different sizes. We’ll have to put it down to one of those peculiarities.
To give you a fair warning if you decide to order new badges for your automobile, we are bringing this up. The best course of action is to search for BMW model-specific insignia. After our little DIY tutorial, we’ll chat more about that.
Where did the BMW logo originate?
What is the meaning of the BMW logo to you? Many people think it represents a propeller, but is this truly true? Wonder no more, as BMW has revealed the significance of its blue and white logo design (opens in new tab).
Of course, the BMW is often associated with aggressive drivers who roar up behind them on the highway and flash their lights while requesting to be let to pass (although, to be fair, Audi has recently usurped BMW in that regard). The next time a BMW emblem appears in your rearview mirror, though, you won’t have to ponder what it represents.
Previously known as Rapp, the company built aircraft engines for the German Air Force, or Luftwaffe, for the first few years of its existence before adopting its current name in 1917. Rapp’s previous logo included a chess piece knight silhouette encircled by a black ring containing the company name. For its new logo, the company kept the black ring but added the now-famous blue and white design in quarters.
The new look was created to showcase the company’s Bavarian background; the Bavarian flag also has a blue and white striped design, and there was a strong desire for Bavarian independence from Germany at the time BMW was founded. The corporate name, BMW, which is short for Bayerische Motoren Werke or Bavarian Motor Works, also expresses support for independence.
So where did the concept of a propeller come from? BMW claims that it all began with an advertisement that was printed in 1929, back when the company was still making airplane engines, and showed an airplane with the BMW emblem overlaid over the propeller. A similar illustration in a 1942 BMW magazine strengthened the relationship, and legend has since flourished from there.
Even though the firm hasn’t had anything to do with the aircraft industry in a very long time, BMW acknowledges that it hasn’t really made much of an attempt to dispel the misconception surrounding its emblem. It’s just a cute little pub fact that doesn’t hurt and promotes the BMW brand.
However, it’s important to understand the complete significance of the logo. To learn more and to see how the BMW logo has changed through time, see this article on the corporate website (opens in new tab).
What is the name of the logo on the front of a car?
The front center of the hood is where you’ll find a hood ornament, also known as a motor mascot or vehicle mascot, which is a specially made model that represents a car manufacturer like a badge.
How are car emblems removed?
- Using a hair dryer, loosen the adhesive on the insignia.
- To remove the symbol from underneath, use fishing wire.
- Onto a towel, pour Goo Gone Automotive.
- To remove the glue, rub it in circular motions.
- To get rid of any leftover residue, wash the area with soapy water.
What does the BMW logo represent?
The question “What does the BMW logo mean?” has a straightforward solution. The company’s Bavarian heritage was emphasized in the symbol’s design. The organization honors its history by using the inverted colors of the Bavarian flag.
However, there are different interpretations of the BMW emblem that are possible. A powerful image for inclusivity, community, and connection is a collection of circles enclosing one another.
The “BMW” word mark’s decision to be written in a softer, sans-serif font is also intentional; it makes the firm look more approachable and interesting.
Additionally, a lot of individuals still associate the BMW emblem with the aviation sector, claiming that the white and blue pattern in the middle makes them think of a plane’s fast propeller against a sky of blue.
What sort of glue is applied to automotive emblems?
Several auto repair operations benefit greatly from the use of 3M Plastic Emblem and Trim Adhesive. For gluing hard plastic components, taillight lenses, trim strips, and other parts for interior and exterior uses on vehicles, it is perfect. Dries swiftly and clearly with a solid connection.
How much does it cost to alter the logo on a car?
Replacement automobile emblems can run you anywhere from $10 to $200. Emblems come in a variety of colors and finishes, as well as various materials. If you choose to hire a professional to change the insignia instead of doing it yourself, expect to pay anywhere from $60 to $200 or more.
What does the BMW logo look like?
The BMW logo, complete with the four colored quadrants, is shown on a spinning airplane propeller in a 1929 BMW advertisement. Since then, the idea that the BMW emblem symbolizes a propeller has persisted
Can you take insignia off with dental floss?
As your dentist taught you, wrap the floss around your fingers and carefully saw it between the badge and the paint on your car. The adhesive tape’s foam core is cut by the sawing movement, allowing the badge to simply fall off.
Pulling the floss through will only cause it to break. To make a clean cut, cut back and forth. You have plenty more in that small box, and you know where to acquire more if you run out, so don’t worry if it does snap!