They only put the center caps that came with the rims on after having aftermarket rims installed. I replaced them with gunmetal carbon fiber BMW logo caps. I can’t seem to locate anything to use to take the caps off. I tried using a putty knife, and while it almost succeeded, it left a tiny scratch on the rim, so I had to quit. Can anyone recommend a tool or other item based on what you use it for? Thanks.
In This Article...
The dimension of all BMW Center caps is the same.
The BMW Center caps come in two sizes:
One size of the cap has a diameter of 2 11/16″ (68 mm), while the other is 23 15/64″ (59 mm). If your wheels are genuine BMW. Sometimes you’ll notice 56mm or 65mm; I asked our engineer, “Why do BMW center caps come in two sizes?” If you are still unsure, check the BMW official website to the specific date. We checked it beforehand, but it was problematic because different people use different measurement techniques.
How is a steering wheel cover removed?
There are three ways for you to effortlessly remove the cover from different types of steering wheel coverings (rubber, thermoplastic elastomer, fur, etc.).
Technique 1: Use a different form of force The principle behind this method is based on the notion of alternate force, which states that by continuously trying to move something tight in the opposite direction, it will eventually become less rigid. This approach will work well because the steering wheel cover is firmly fastened when it is installed.
Simply turn the steering wheel cover first toward you, then turn it back the other way. Continue until you see that the cover has loosened and is simple to remove. Alternating the action will help it separate more quickly.
The task could take some time to complete. Therefore, if you easily grow bored, you should attempt the other two.
Method two: Make use of a blow dryer This technique uses a blow dryer to heat the cover, softening it and making it easier to remove. Therefore, you should blow into each part for 10 seconds while your blow dryer is on the highest setting. The cover can then be removed without difficulty.
Third technique: Cut the strings Cut the connecting strings to free the wheel covers in its entirety. Cutting all the strings using scissors, followed by an easy manual removal of the steering wheel cover The quickest and simplest method to get caught up is to follow this procedure. However, use caution when using the scissors to prevent injury to yourself.
How is a hub grease cap removed?
Question:
How are oil caps changed? Do they simply pop out and in or does the hub need to be disassembled in any way?
Expert Reaction:
Grease caps merely pop in and out. Prying them open with a flat-head screwdriver or tapping them with a hammer from side to side is the best way to remove them. New ones are simply hammered in with a light touch. To aid tap the grease cap or bearing protector into the end of the hub, I typically use a brief piece of 2×4.
Links to a few videos that show how to remove the grease covers have been provided.
What size center caps come with VWs?
On several Volkswagen wheels in 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, and 2016, this OEM Volkswagen cap was available. It sports a chrome Volkswagen logo on a black finish. Its diameter is 2.50 inches, or 63.50 millimeters, and it fits most center caps for Volkswagen Passat, EOS, Tiguan, Jetta, and GTI models.
Do center caps have to be used?
In the middle of most wheels, there is a hole. The centerbore is the name of that hole. The centerbore’s functions are as follows:
- Keep the wheel and hub in proper alignment.
- lessening wheel vibration
The issue is that the centerbore leaves the spindle nut exposed if the center cap is missing. The seal is the only line of protection for the wheel bearing. When you drive, a lot of dirt, moisture, road salt, and grime are in contact with your wheels. The spindle nut and wheel bearing may become contaminated by those contaminants. This could result in:
- Spindle and spindle nut corrosion
- Failure of the seal causes the wheel bearing to fail.
The centerbore is concealed by a wheel center cap. This stops the contamination of these components by the contaminants. Some wheel center caps have enough room to accommodate all of the lug nuts. This protects the lug nuts from the weather. Wheel removal and installation are much simpler when your lug nuts are kept clean.
What is the name of the rim’s central cap?
It’s simple to err, especially given that the terms are frequently misused, wrongly utilized, or used in place of one another in some regions of the nation. Let’s define a hub cap first. The decorative disks that sit over a wheel’s hub are known as hubcaps. Hubcaps, at the at least, protect the wheel hub but may do more.
What are the prices of center caps?
What is the Price of a Center Cap Replacement? You may spend anywhere from $10 and $230 only on parts to replace a wheel center cap. The cost of labor varies between auto repair shops.
Are hubcaps stolen by people?
Don Cerveny had to experience the pandemic of hubcap theft firsthand. Since police didn’t bother to record separate statistics on hubcap thefts until the first of this year, it’s possible that the number of hubcaps stolen has increased by up to fifty times over the past year. Precise numbers are difficult to come by, though.
Why do floating hubcaps exist?
Even while the car is moving, the premium floating center caps produce a distinctive focal point on the wheel. They come in two sizes and are compatible with Original BMW alloy wheels on all BMW vehicles. Simple installation; just take off the old center caps and put the new ones in their place.
The installed rates are based on the center’s labor rate and an estimated installation time, and they are subject to change.
Freight prices are estimated until an order is sent and final freight charges are determined due to the numerous factors that ultimately impact freight costs.
For complete information accuracy and product availability, see your local BMW center.
Does grease get poured in the dust cap?
It’s simple to feel a little overwhelmed if you’re relatively new to the world of towing and all of the jargon, tools, equipment, and accessories that go along with it. Discussions online and at the neighborhood trailer supply parts counter frequently center on topics like gross vehicle weight ratings, tongue weight, trailer brakes, drawbar pull, tie-down hangers, trailer roof vents, and tow bars (among many others). You’ll discover that in these more extensive debates, it can be easier to ignore the most elementary details. One example is grease caps. The majority of the time, these little but crucial parts go unnoticed—that is, unless something goes wrong and a cracked grease cap leaves you stranded on the side of the road, waiting for the tow company to arrive.
But what are grease caps exactly? What do they serve? Do they actually have a use or are they just an ornament for your trailer? You can rest assured that grease caps are not ornamental, though. Even though they might add a charming touch to a relatively plain trailer wheel, grease caps have an extremely significant function. The little, rounded metal covers you see at the very center of a wheel are called grease caps. Although they are occasionally referred to as dust caps, we will refer to them as grease caps moving forward for clarity. Grease caps shield your wheel bearings from the debris that can (and will) damage bearings, such as dirt, dust, sand, water, salt, and road grime. Your wheel bearings just wouldn’t last very long on the road without grease covers.
Lubrication is necessary continuously for bearings to function properly. When wheel bearings are replaced or even taken out for wheel hub or axle treatment, thick bearing grease is packed all around them. Grease caps hold the grease that surrounds the wheel bearings in place and shield the bearing grease from contamination.
In actuality, the caps are dripping with grease as well. This does two things. In addition to giving the bearings a constant supply of grease, it also prevents grease migration. The grease might ultimately find its way into the cap if it were empty, filling it up but leaving the bearings dry. Because of this, it’s crucial to completely fill the caps with grease in addition to packing the bearings with grease.
Read the next page to learn how to utilize grease caps now that you have a clear understanding of what they are.