A CURT 13152 trailer hitch, a few simple tools, and around 40 minutes are all that are needed to install a trailer hitch on a 2018 Hyundai Santa Fe Sport. Start hauling hitch-mounted accessories with your Hyundai Santa Fe Sport right away by following these simple instructions.
In This Article...
Hyundai Santa Fe Trailer Hitch 2019-2020
The Hyundai Santa Fe trailer hitch for 2019-2020 models is designed and made specifically to match your Santa Fe.
- Observe that this ONLY refers to the trailer hitch (no wiring harness). The tow hitch harness is available here. Utilize the Hyundai Santa Fe Trailer Hitch to transport your belongings with ease.
- The 2019 and 2020 model years are compatible with the Genuine OEM Hyundai Santa Fe Trailer Hitch.
Select Hyundai Santa Fe, CURT Class 3 Trailer Hitch, 2″ Receiver, Towing
Can a Hyundai Santa Fe be hitched?
The 2019-2020 Hyundai Santa Fe Trailer Hitch is specifically designed to fit your Santa Fe and enhance it. Observe that this ONLY refers to the trailer hitch (no wiring harness). The tow hitch harness is available here. The Hyundai Santa Fe Trailer Hitch makes it simple to transport your belongings.
A Hyundai Santa Fe from 2021 can it be hitched to a trailer?
Draw-Tite(r) provides a hitch to accommodate your vehicle whether you drive a cross-over SUV or a pick-up truck. Draw-Tite hitches have been the go-to option when quality is demanded for more than 75 years. No matter what vehicle you drive, Draw-Tite offers an application-specific, custom-fit hitch that will meet your demands. It is made of solid, all-welded construction for maximum strength and safety.
- Square Receiver Tube Opening of 2 in.
- Rated Up To 350 lbs. Tongue Weight And 3,500 lbs. Gross Trailer Weight (TW)
- Each and every hitch is created for users of trucks, vans, and sport utility vehicles.
How can I tell if my Hyundai Santa Fe is equipped with a tow package?
Effective Expert Response:
Simply stopping by your neighborhood Hyundai dealer with your VIN will tell you whether your 2015 Hyundai Santa Fe has the factory tow package. They will be able to tell you for sure if your specific model of Santa Fe is outfitted with the tow package using the information you provide.
Depending on whether you have the tow package or not, the trailer wiring harnesses that are available for your Santa Fe do install differently. For vehicles with the tow package, the Tekonsha T-One Vehicle Wiring Harness # 118269 can be plugged into factory ports along the frame rail at the back of the car. To find out if your car has the tow package, you may also inspect if these plugs are present on it. You can also look at the image of these ports that I have attached.
I suggest the Curt T-Connector Wiring Harness # C56184 if you discover that you do not have the OEM tow kit. This will plug into factory ports in the cargo area in the back of the vehicle. You can use the installation video I’ve attached as reference.
A Hyundai Santa Fe is able to tow a trailer.
Tow Rating & Cargo for the Hyundai Santa Fe With a 3,500-pound towing capacity when properly equipped, the Santa Fe is one of the most competent SUVs available today.
A trailer can a 2016 Hyundai Santa Fe tow?
Like many other late model years, the 2016 Hyundai Santa Fe was fairly capable when it came to overall towing capacity. If your car and trailer were correctly outfitted, you could pull up to 5000 lbs.
This is great, but if you lacked the necessary gear, your capacity was considerably reduced to just over 1,600 lb. As a result, you must understand what gear you required for installation on both your car and your trailer in order to reach those higher ratings.
The most important resource you have for your car is the owner’s manual, so make sure you read it well and follow all of Hyundai’s instructions.
Total Capacity: The 2016 Hyundai Santa Fe’s overall towing capacity ranged from 1,653 to 5,000 lbs. And was only affected by two factors: whether you had the optional trailer package fitted and whether the trailer you were towing was equipped with its own braking system.
A camper can a Hyundai Santa Fe tow?
How is it possible for this small SUV to have such remarkable towing capacities? To begin with, it offers two engine choices, each with a variety of advantages and towing capacities.
The base 2.5-liter inline 4-cylinder engine, which can produce up to 191 horsepower and 181 lb-ft of torque, leads this selection. This powerplant can tow up to 2,000 pounds when properly outfitted, making it ideal for bringing your pop-up camper or small aluminum boat on a weekend excursion.
Upgrade to the 2021 Hyundai Santa Fe’s optional 2.5-liter inline 4-cylinder turbo engine if you need to tow a few jet skis or a small travel trailer, though. As you go down the open road, this motor’s 281 horsepower and 311 lb-ft of torque will make your heart race.
When properly equipped, it also has a maximum towing capability of 3,500 pounds, making it perfect for all your adventure demands.
How much weight can a 2020 Hyundai Santa Fe tow?
The towing capability of the 2020 Hyundai Santa Fe ranges from 2,000 pounds to 3,500 pounds. On your upcoming road trip, your family will not only appreciate the spaciousness but you’ll also be able to bring your boat or camper.
Can you put a hitch together by yourself?
If you have the appropriate tools, you can install a trailer hitch by yourself. DIY hitch installation is an excellent technique to reduce the cost of installing a trailer hitch.
Installation of CURT custom hitches is designed to be as simple and painless as possible. The majority of CURT hitches are simple to install in your garage using standard hand tools.
How much time does installing a hitch take?
Question:
How much should the installation of this hitch cost, and who would handle it? Thx
Expert Reaction:
A professional can attach the trailer hitch # C13149 to your 2013 Toyota RAV4 in 15 minutes, according to Curt. If all the necessary tools are accessible, it should take a mechanically inclined do-it-yourselfer roughly 30 minutes.
Even though installing a hitch takes only 15 minutes, an expert might bill for an hour of labor. You may call around to several auto repair companies to find out their hourly rates, but I’d guess the average is between $90 and $120.
Etrailer Ball Mount Kit # 989900 is recommended if you intend to perform some towing. It has two ball mounts, one with a rise or drop of 3/4 inch or 2 inches, and the other with a rise or drop of 2-3/4 inches or 4 inches. A 1-7/8-inch ball, a 2 inch ball, a hitch pin with a clip, and a storage bag are also included.
Use the link I’ve provided to learn how to measure to chose a ball mount if the ball mount kit doesn’t have the appropriate rise or drop to tow the trailer level.
Additionally, you can install a 4-Way flat connector to the back of the car using part number 118578 for trailer wiring. For your convenience, I’ve provided a link to a video that shows an example wire installation.
How much does it cost to install a hitch?
The short answer is that it depends on the sort of tow hitch you have, the make and model of your automobile, and how much work it will take to install it. For instance, while some vehicles don’t require drilling to attach a tow hitch, some must.
Hitch installation costs typically range from $100 to $800. Remember that you’ll also need to purchase the tow hitch and other components individually, which can easily cost an additional $150 to $200.
The following vehicle parts are necessary for tow hitch installation, along with our recommended Amazon selections for each:
The price of the tow hitch and its accessories are different from the price of installation. If your installation costs $100, the necessary equipment could raise your cost by an additional $150.
Is it possible to tow a trailer without a hitch?
My Dad’s old car needs to be towed to the salvage yard. The issue is that neither it nor my automobile has a hitch. Without a hitch, how can you tow a car?
In less than two minutes, find out if your auto insurance is being overcharged.
It’s risky, but it’s feasible, to not use a hitch! Without a hitch, you’ll need a strong rope or chain to tow a car. Once you have that, proceed as follows:
- To a spot on the front of the car, fasten the rope or chain.
- The second end should be fastened to a substantial object on the opposite vehicle.
- Someone must be in the automobile while it is being driven to ensure that it remains in neutral. Additionally, you’ll have to maneuver it around bends.
You can only tow the automobile a short distance to get to work. Watch your speed as well. You are seriously endangering both cars if you don’t utilize a hitch. Although it is feasible, the best recommendation is to locate a hitch-equipped helper or dial a tow truck.
Consider joining roadside assistance if you’d prefer expert support. Although there are frequently waiting times, towing is frequently included.
Try Jerry if you’re seeking for affordable roadside assistance. You receive industry-leading roadside assistance through Jerryas membership, including features like towing, lockout service, and a mechanics hotline. You can check the app or contact one of our helpful agents to see whether you qualify. A special deal of $50 for your first year might be available to you!
Can you take a hitch off?
A wrench and around 30 seconds are all that are needed to remove a hitch ball attached to your bumper. The nut holding the hitch ball to the bumper can be easily unscrewed. However, mounting a hitch with a ball utilizing the hitch receiver may make it even simpler.
A pin and cotter pin are commonly used to mount hitches to the receiver on the back of a tow vehicle. To remove the complete hitch assembly, ball included, from the vehicle, just remove the cotter pin and pin from the receiver. It shouldn’t take more than a minute to remove it, regardless of your arrangement. Really, it’s that simple.
Is wiring required for a hitch?
Once the hitch is fastened, use your fingers to tighten the bolts as much as possible. Use your torque wrench to tighten each screw to the levels specified in your tow hitch’s instruction manual once you have all of the bolts in place.
Your car’s turn signals and brake lights must be connected to your tow hitch via a trailer wiring harness in order to tow a trailer lawfully. A wire that connects your trailer to the back of your car is known as a trailer wiring harness.
If your truck or SUV isn’t already wired for towing hitches and trailers, you’ll need to purchase and install a trailer wiring harness.
Wiring is beyond the scope of this discussion, but you can locate how-to videos on YouTube or seek professional advice.
Cross your safety chains at all times! In the event that the tongue, which connects your trailer to your tow hitch, comes loose and falls, chains will catch it.
Does your car’s hitch increase its value?
A hitch is a vehicle accessory that is frequently mounted on the rear of your car and serves as the link between the car and the trailer. A In other words, it establishes a safe and secure connection between your car, van, or truck and the object you are towing. A Once installed, hitches boost the utilitarian value of your car and are typically regarded as permanent.