H11 Basic Halogen Bulb, 2 Pack by Sylvania (Part No. H11. BP2)
In This Article...
How do I choose the right headlight bulb to purchase?
For information on bulb fittings, you can either get in touch with the company that makes your car or just check your owner’s manual, which should list all the fittings your car needs for each kind of light.
You can take the headlight off and examine the bulb if you’re a little more hands-on and competent to inspect your headlights on your own. The bulb housing will have the fitting information written on it, such as “H7.” Look at this illustration:
Does Sylvania H11 resemble Sylvania 9006?
Checking the connectors that your light bulbs give is crucial if you wish to swap out the bulbs in your headlamp. Checking the connector variations of these light bulbs, which are as follows, is therefore crucial:
Connectors of 9005 vs 9006 Bulbs
Unfortunately, while having extremely similar looks, the connectors for 9005 and 9006 bulbs are different. The 9005 light bulb, in contrast to the 9006 bulbs, contains an extra connector. However, by altering the connector, 9005 bulbs can be used with a 9006 connector.
Connectors of 9005 vs H11 Bulbs
The connectors for the 9005 and H11 bulbs are entirely different, as one would anticipate. This is because they are designed for use with high beam and low beam, respectively. However, it is still possible to use a 9005 bulb with an H11 connector.
Connectors of 9006 vs H11 Bulbs
Despite their apparent similarity, the connectors for 9006 and H11 bulbs are fundamentally different. Thankfully, 9006 bulbs can also be used with H11 connectors if you’d like, just like 9005 bulbs can.
Honda Civic exterior lighting features
In a car, lighting is crucial. The 2020 Honda Civic Sedan is equipped with LED turn signals built into the mirrors, available LED headlights, available LED fog lights, and LED daytime running lights. Compared to traditional light bulbs, LED lights emit more pure light, which enables your car to better illuminate the road. The cost-effectiveness of running all of your outside lights on LED is amazing because they are long-lasting, energy-efficient bulbs.
Available one-touch power moonroof for the 2020 Honda Civic Sedan
Many exterior elements, like this available one-touch power moonroof with tilt feature, may be enjoyed from within the car. A moonroof with one-touch functionality opens with the push of a button. You’ll adore this feature’s views and that it’s readily available.
Step 2: Remove Protective Covers
Unscrew any screws holding the protective coverings in place on the lamp base to remove them. If the second screw secures a cover to an electrical line, take care not to remove it.
Step 4: Loosen Bulb
Remove the screw securing the wiring for your light, but only loosen it. Remove your old halogen bulb from its socket gently by twisting and pulling. Put the socket for your new halogen light in place.
Step 5: Re-tighten Screw
Retighten the screw holding the wiring for your light while supporting the bulb firmly with your palm. The protective bulb cover should then be put back on, along with any screws that were removed to expose it. Also, put your wall switch back where it was.
Step 6: Test Your New Bulb
Reconnect your power and double-check that you replaced the bulb properly. After resuming electricity, if it still doesn’t function, don’t be afraid to switch it off once more, change the wall switch’s protective covers, and call a licensed electrician.
How do I determine which lights my automobile requires?
You can only see the bulbs that fit your vehicle if you enter the registration number of your car. You can also consult the manual for your vehicle’s lighting system. If you don’t have the vehicle manual or the registration number, you can determine the new bulb you need by taking out the old one.
What type of headlamp does an H11 bulb fit?
The most common type of bulb used in contemporary automobiles is the H11-size bulb, which is available in several models, including the 2012–2015 Toyota Tacoma, the 2019–Ford Ranger, and the 2012–2016 Honda Civic Si.
Should I swap out both of my headlights at once?
Thank goodness, most new cars come equipped with several headlights. However, there aren’t enough secondary lamps to provide a wide enough beam in the pitch black. Our mechanics advise installing both lights when one goes out because of this. The lifespan of headlamps that are factory installed should be similar.
What do low beams do?
Low and high beams are utilized for different types of nighttime driving, with low beams being used for city driving and high beams being used for country roads with little to no light.
In low light conditions, low beams should always be utilized; high beams, which are oriented upward for additional light, should only be used for extremely brief periods of time in order to avoid blinding other drivers.
All vehicles have a low beam and high beam feature, and most drivers should be familiar with how to use each one since it’s a requirement for obtaining a license.
What are low beams?
When driving at night or in a low-light environment, such as an interior parking lot, you should utilize your car’s low beams, which are the “regular” lights that it emits. Low beams, often known as “dipped beams,” have a close-range focus.
The most crucial and commonly used beam in an automobile is the low beam. To illuminate the road and prevent blinding other motorists, the light beam is directed downward. They enable other motorists to see you.
In the past, drivers had to manually activate their low lights, but more recent vehicles do so automatically when they detect low light conditions, such as at night or when approaching a dark parking lot.
What are high beams?
Normal use of the high beam headlight lighting feature occurs in places with little to no light, such the country or on narrow roads without any streetlights. High beams are sometimes known as “brights” or “full beams.”
In order to illuminate a surface area above and beyond what is illuminated by the low beams, the light beam for high beams is directed upward. High beams have a far-reaching focal point.
High beams, in contrast to low beams, never automatically turn on. The driver must manually activate them when necessary. High beams should only be employed briefly when additional lighting is actually required.
High lights while driving have the potential to dazzle oncoming cars, which is extremely dangerous. It’s against the law to leave them on for a lengthy amount of time.
Lifespan
Both H11 and 9005 bulbs have a sizable lifespan. A 9005 can last up to 50,000 hours while an H11 can last an average of 30,000 hours. It’s crucial to note that even though the H11 has a shorter lifespan than the 9005, it still outlasts most headlight bulbs.
Compatibility
While 9005 bulbs can only be used with 9006 and H13 bulbs, H11 bulbs can be used with other low beam lights like H8, H9, and H16. H11 and 9005 bulbs, however, cannot be used interchangeably.
Illumination and Wattage
The maximum wattage for halogen H11 bulbs is 55W, or roughly 350 lumens. The light from the bulb itself can’t go great distances because it has a beamed focus.
Halogen 9005 headlight bulbs feature a 65W maximum power rating and a 600 Lumen maximum output. Additionally, they emit brighter beams that illuminate a larger area.
Xenon and quartz-ion versions are a completely different situation because the lumen output varies on a variety of variables, including their various color temperatures and power output (we’ll have to discuss that in another article, though).
What could I substitute for H11?
A component number is used to identify and refer to halogen bulbs, LED headlight bulbs, and HID conversion bulbs, which are available in a variety of sizes and shapes (bulb size or bulb number).
H11, H7, 9003, and H13 are a few common bulb sizes that you might already be familiar with. An H11 bulb, for example, will always have the same locking tabs and plugs regardless of the technology (halogen, LED, or HID).
For instance, this is comparable to the sizes of household batteries. No matter the brand or technology, AAA batteries will always remain the same dimensions, length, etc. The same reasoning also holds true for headlight and fog light bulbs.
The fact that several sizes of car headlight and fog light bulbs are interchangeable or equal is an intriguing fact. H11, for instance, is the same as H8, H9, and the L-shaped H16 bulb.
Due to widespread demand, we’ve compiled a comprehensive list of all headlight, fog, and similar bulbs. We also go into greater detail about some common bulb sizes before wrapping off with some frequently asked questions.
What do the lights on a Honda Civic do?
Since headlights are consumables, you’ll ultimately need to change the bulbs in your Civic’s headlight assembly.
The various light bulb types and sizes used in Civic models are listed below:
- Civic models from 1988 to 1991 use 9005 bulbs for high beams and 9006 bulbs for low beams.
- Civic models from 1992 to 2003 have a single dual-filament halogen bulb for both the low- and high-beam functions. Likewise known as H4 or 9003 bulbs.
- Civic models from 2004 to 2014 use 9005 bulbs for high beams, 9006 bulbs for low beams, and H11 bulbs for fog lights.
- 2015 Civic: Sedans have low-beam headlights that utilize 9006 bulbs, while coupes have low-beam headlights that use H11 bulbs. All trims use H11 bulbs for the fog lights and 9005 bulbs for the high beam headlights.
- All 2016-2018 Civic vehicles use H11 bulbs for low beams, 9005 bulbs for high beams, and H8 bulbs for fog lights.
Why is the Honda Civic’s DRL light on?
Daytime Running Lights increase your visibility to other motorists and reduce the likelihood of crashes. Even when the parking brake is engaged, the lights remain on. The daytime running lights will also go out when you turn off your car. When the headlight switch is turned on or in automatic mode, the daytime running lights may also turn off.
LEDs may they be used to replace halogen bulbs?
In many instances, you can just swap out each bulb individually. We walk you through the most crucial steps in choosing new LED bulbs for the fixtures that are utilized the most frequently. You must consider a few extra factors if your bulbs demand a voltage level other than the standard 230V.
There are several advantages to switching from incandescent or halogen lamps to long-lasting LED bulbs. You gain from very low energy consumption and even improved light performance. Additionally, since LEDs can manage all shades of white light, even halogen lights’ warm, yellowish light is easily accessible!