Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
In This Article...
Low tire pressure reset
On the Hyundai Tucson, there is no option to restore low tire pressure. Drive your car for 5–10 miles if you notice the warning symbol and all of your tires are inflated to the required levels. You will need to go to your local Hyundai dealership to have all the sensors professionally inspected if the warning light is still on.
The warning light on some Kia vehicles shuts off when the air pressure is topped off, despite the fact that this is not advised. If the suggested air pressure for your car is 32, for instance, try filling it up to 35 and then driving for a few miles. Remember that increased air pressure may reduce driving comfort and result in uneven tire wear.
The individual tire pressures won’t be visible on the cluster LCD display if the TPMS isn’t working properly.
- After a brief drive, check the tire pressure monitoring system display in the instrument cluster to frequently check your tire pressure, such as once a week.
- Please be aware that, especially if your car isn’t used frequently, tires might naturally lose one to two PSI per month.
- Also keep in mind that tire pressures can change with temperature, so it’s best to check them right as you start your car up.
- Verify that your tires are properly inflated in accordance with the information placard on the driver’s side door jam of your car.
to restart The tire must be inflated to at least 35 psi. For more than a week, I attempted this with 32. Go above 35, a friend said. Drive it; I turned it off, but when I turned it back on, it was broken. The answer is 35.
After inflation, how do you turn the light off? I keep asking that, but all I get are these useless answers!
How should I respond if the tire pressure sign illuminates?
The Hyundai Tucson is a fantastic vehicle, and if there is a problem with the tires, you will get a warning sign on your LED screen.
The graphic will clearly show you the problem the automobile has identified as well as which tires require attention.
Once the tire pressure has been adjusted to the proper PSI (this information can be found on the door placard or in your user manual.) You might observe that the sensors’ recalibration can take some time.
You might want to calibrate the tire pressure monitoring device by following the straightforward instructions below if you believe the light should have turned off but hasn’t:
- Take a long drive while maintaining a constant speed of 50 mph; this will reset the pressure system and turn off the light.
Check out these more suggestions to try if this one doesn’t work:
- The TPMS reset button may need to be identified; it is typically found under the steering wheel. Check your user manual for its location if you can’t find it.
- Once you’ve found it, turn on the ignition of the automobile, but do not start the engine. When the button blinks three times, let go of it.
- The sensor may need to refresh for 20 minutes or so before you may start the car.
Other pointers for resetting the TPMS light are as follows:
- All tires, including the spare, should be steadily inflated to slightly over the recommended PSI. Then totally deflate each tire. Once this has been accomplished, properly PSI-inflate the tires.
- It may be necessary to unhook the battery cable from the sensor, start the vehicle, and honk the horn for a few seconds in order to deplete the sensor’s power. This will release any remaining power in the car.
- When you’re done, re-connect the battery, and the TPMS should be fixed.
Visit a Hyundai dealership so that they may conduct a thorough sensor health check if you’ve noticed that the light is still on.
How do I reset the TPMs on a 2018 Hyundai Tucson?
Tire pressure is monitored via wheel sensors in the 2018 Hyundai Tucson. Park the car somewhere flat, and use a gauge to make sure the tires are inflated to a PSI of about 35 to reset the TPMS warning light. Turn the key in the ignition to the “on” position without starting the car with the doors locked and the windows down. When the TPMS reset light blinks three times, press the button underneath the steering wheel. Remove the key and turn off the ignition. As the system registers the new pressure in each tire, turn on the engine and let it run for 20 minutes. Other techniques include 10 minutes of 50 mph driving or cutting and re-connecting battery cables.
Make sure the tire pressure is right before starting the 2018 Hyundai Tucson to reset the TPMs. After 10 minutes, press the reset button, which is located to the right of the steering wheel. You might need to keep pressing the button until the light flashes in some circumstances. Incorrect tire pressure and poor performance are both possible if the sensor is not functioning properly.
Hyundai Tucson Reset Tire Pressure
Resetting low tire pressure is not an option on the Hyundai Tucson. Drive for 5 to 10 miles if the warning symbol shows and all of your car’s tires are inflated to the proper levels. You must take your Hyundai to a Hyundai dealership if the warning light is still on so that all of the sensors may be expertly inspected.
Though it is not advised, some Hyundai vehicles’ warning lights switch off when the air pressure is inflated above the suggested level. For instance, if your car’s tires should have 32 psi of air pressure, try filling them with 35 psi and driving a few kilometers. Remember that higher air pressure might make driving less comfortable and lead to uneven tire wear.
The individual tire pressures shown in the cluster LCD display won’t be available if the TPMS malfunctions.
How can I make my low tire pressure warning light come on?
Only after checking the tire pressure in each wheel should you try to reset the light. When your tires are properly inflated, the light might turn off by itself. Driving at 50 mph for roughly 10 minutes should help the tire pressure sensor reset if it doesn’t go off right away.
On a 2022 Tucson, how do you reset the tire pressure light?
- Put the car in park.
- Start the engine.
- Until the Settings menu shows on the screen, continually press the Mode button on the steering wheel.
- To scroll to the Tire Pressure screen, press the downarrow key.
- Each tire’s pressure should be checked.
- The screen will display the low-pressure tire.
Why won’t my tire pressure warning light turn on?
Try the following if your TPMS light is still on after you have inflated your tires to the recommended pressure: 10 minutes at a speed of 50 mph would be plenty. When you start the car again, the TPMS light should not be on because the tire sensors should have been reset.
How can I turn off the tire pressure warning light?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is normally where you’ll find the reset button for the tire pressure monitor. If you can’t find it, consult the owner’s manual for your vehicle.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
Will the tire pressure light automatically turn off?
Tire pressure can be impacted by overnight temperature variations or by cold winter days. The low-pressure indicator may then display as a result of this. The pressure in your tires can change by up to 10 PSI when there are significant temperature changes between day and night.
After about 20 minutes of driving, the light may turn off on its own when the right inflation level stabilizes and the air in your tires warms and expands.
In any case, you ought to have your air checked immediately. Your tires are at least 25% underinflated, according to the TPMS light. This poses a risk to your safety, especially if the load is close to your vehicle’s maximum load capacity. There is a higher possibility of tire failure, degraded handling, and increased tire wear and tear. Your fuel economy may also suffer.
What does the Hyundai Tucson’s TPMS light mean?
You will have your head blown if you thought the TMPS was cool. A TPMS malfunction indication is also present on the Hyundai Tucson.
The letters TPMS are lit up on this light display. This indicates that the monitoring system is unable to detect tire pressure in one or more of your tires when it appears.
We all agree that technology is fantastic when it works, but this makes us more prone to relying too heavily on the car’s computer to alert us to problems. Computers can malfunction, let’s face it. The TPMS indicator light is on for a variety of reasons.
- There might not be enough signal.
- when the system can’t operate normally since you recently got new tires.
After getting new wheels or tires installed, it’s crucial to make that the TPMS is still functioning properly.
Why is the light on my tire still on?
If your tires are properly inflated yet the warning light continues to illuminate, you may have a leak or a TPMS issue in one or more of your tires. To determine if a tire has a leak is not difficult. Simply double-check the air pressure in each of your tires with your tire gauge. If all of the tires have the proper air pressure, one or more tire pressure sensors are likely to be at fault, necessitating repair work on your tire pressure monitoring system. You’ll need to replace or repair the tire if you notice that one or more of your tires’ air pressures have fallen.
Why do my car’s tires, which are good, state they have low tire pressure?
defective TPMS sensor Additionally, these sensors are powered by onboard batteries, which have an approximate lifespan of 5 to 7 years (up to 10 years in the best cases). The TPMS sensor may malfunction and illuminate the low tire pressure signal even when the tires are in good condition due to low battery power and aging-related wear and tear.
Can you drive with your tire light on for how long?
Low tire pressure makes the situation worse because it is more difficult to gain traction and roll ahead. Under these circumstances, avoid driving with low tire pressure for more than 40 miles or more than 30 minutes.