Registered
Read an interesting post about this. I want to know what happens if you disconnect the battery because I’m new to iDrive. or disable the iDrive’s control fuse?
I’m not sure, but you might not want to completely disconnect the batteries in a BMW without taking some precautions because I’ve heard that if the car loses all power, it might enter an anti-theft mode. I’m not sure because I don’t work on my autos.
Anyhow, that wasn’t the type of reset the OP was referring about (nor the one I was talking about).
When you lock the car and turn it off, iDrive completely shuts off for roughly 12 minutes. In most BMWs, you can restart the computer for the idrive system, navigation, etc. by holding down the volume button for 20 to 25 seconds constantly. The volume is only momentarily turned off when the volume button is pressed; the system is not restarted.
In This Article...
How is a BMW manually reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
How do I reset the sound system in my BMW?
Navigational CCC system (roughly 2004 through 2010) • Hold down the DVD and CD drive eject buttons while pressing and holding down the audio system power button for roughly a second.
Hold down the iDrive knob while simultaneously pressing the CD/DVD eject and audio system power buttons for roughly a second. iDrive 4 (2014–2017).
How can I clear the BMW Service Due display?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
How can I reset my BMW now that the battery has been changed?
One of the vehicles with the most advanced intelligent operating system in the world is the BMV. Therefore, the first thing you must do after every hit or replacement of an object in the car is to restart the entire vehicle.
This setup enables the computer to anticipate your next replacement requirement and alert you to it. After changing the battery, resetting the BMW computer is a quick and easy process.
- First, turn on the controller again.
- Step 2: Press “Trip” to activate it and make it light.
- Step 3: Hold down the “trip” button while continuing to press and hold it until the “Reset” button shows up on the screen.
- Reset in Step 4
How is BMW ConnectedDrive updated?
Updating BMW ConnectedDrive: Instructions On the BMW website, go to the Accessories Update page. Utilize your BMW adapter cable to connect your computer to your car. The most recent BMW ConnectedDrive update can be downloaded. Open the app after completing the steps to complete the update.
How can I tell what model of BMW iDrive I have?
The iDrive system’s navigation is a crucial component that makes getting from A to B simple. But since roads and sites of interest constantly change, it’s critical to maintain your BMW’s GPS maps updated if you want to get the most out of your iDrive.
Many of the most recent BMW models include over-the-air (OTA) map updates, which use the vehicle’s integrated SIM card to automatically download the most recent map data. The procedure in these automobiles is comparable to updating your smartphone to the most recent iOS or Android version; all you have to do is restart your car after your iDrive has downloaded the data.
For vehicles that do not allow OTA updates, a manual upgrade is necessary. Previously, updating BMW navigation maps required changing a DVD holding the map data. More newer vehicles include built-in hard drives that hold the data, allowing you to update your map by overwriting the hard drive’s contents. You can accomplish this with BMW by connecting a USB stick with the updated map data to the USB port in your vehicle.
It’s a good idea to determine which map version you need, which relies on your iDrive system, before purchasing a new BMW map. Use the settings menu when your iDrive navigation is open to navigate to “Navigation system version,” where you can see the region, version, and year of your current GPS data.
Why is my BMW’s screen malfunctioning?
Since you are still covered by the warranty, take it to the dealership. Check to check if the computer on your automobile reboots after 20 minutes of sleep. The blank screen is a frequent issue, and it usually goes away after restarting the car. Since you are still covered by warranty, bring it to the dealer.
How much does a new BMW iDrive cost?
It costs nothing to update the software on your BMW through BMW ConnectedDrive. The iDrive software update from BimmerTech starts at $249.
There are three ways to update the software on your BMW iDrive:
- With the iDrive software upgrade from BimmerTech
- through the webpage for BMW ConnectedDrive
- by means of the BMW ConnectedDrive App
By 2022, BMW will have updated its software to version 21-07. The most recent BMW software updates will always appear on your BMW control panel and My BMW App if you wish to stay informed.
In the event that there is no source available, what should you do?
The profiles, phone integration, etc., all appeared to be working as expected on the system. However, there was no audio, and when the volume rocker (located in the center of the console) was scrolled, it said “no audio source.”
Thought there might be a problem with my profile, but while she was driving, my girlfriend also encountered the same difficulty.
Simply push and hold the media screen’s volume rocker dial in the center console of the BMW ix until it turns black (10 to 30 seconds), and then wait for the system to restart itself, which will take a few minutes.
How do I reset my iDrive to its default settings?
To reset the car data on your BMW with Operating System 8, choose “Menu” > “System settings.” Please be aware that after being restored to factory settings in vehicles with a manufacturing date of 11/2020, the vehicle will be deleted from your BMW ID on the My BMW App and My BMW webpage.
I need to reset iDrive for a new owner.
A 2012 650i Convertible with 23K miles was recently purchased. It is preloaded with voice recordings and radio/navigation presets from the previous owner. Just a ton of info that has been preserved. Is it feasible to remove everything from this and transmit it in its original form?
Definitely helpful Google link I bet you’ve been waiting forever to pull that sleazy trick on someone.
I am aware of how to delete radio presets, but I would like to know how to delete everything, including navigation history, store data, radio content, all drivers, and all recorded music.
There must be a technique they employ to accomplish this when a car is traded to the dealer, right? They are unable to assign a tech to delete each and every item, and searching for everything takes hours.
Go to settings from the iDrive main menu. Position the iDrive controller to the right while in the settings menu. After that, move it to the right one more time to see the option to remove all personal information. I haven’t used it, but it’s in my car.
Does my BMW require reprogramming after a battery change?
Let’s first focus on what BMW battery registration genuinely is before delving into the procedure. Battery registration, to put it simply, is the process of notifying your car that a brand-new battery has been installed. Importantly, it must be done every time you replace the battery in your BMW, model year 2002 or later.
The car adapts the amount of energy required to recharge to operate at peak levels as your battery ages and gradually loses its ability to charge. The battery needs more charging the older it is. By registering your battery, you can inform your engine control module (also referred to as DME — Digital Motor Electronics) that a new one has been installed. As a result, the vehicle will reset the old battery statistics and won’t attempt to overcharge the new battery under the assumption that the old one is still in place.
In addition to registering, you must also code your BMW computer. No matter how different or similar your new battery is from your previous one in terms of specifications, it will still be necessary each time you change it.
When does BMW ConnectedDrive end?
Select automobiles will no longer be supported for ConnectedDrive services starting in February 2022 due to cellular carriers’ phase-out of the 3G network.
How do I delete my iDrive?
You can create a one-to-one match of the local data in the backup set to your account using the Archive Cleanup tool.
If you remove data from your computer that has previously been backed up, that data will also be permanently removed from your IDrive account.
- Click Archive Cleanup in the tool bar under the Backup tab.
- Then select Cleanup Now. A list of the items you want to remove from your account will be generated by IDrive.
- To permanently remove the files from your account, click Delete.
Alternately, you can create recurring automated cleanup by checking the Periodic Cleanup box. Decide how many days and what proportion of the data should be cleaned up.
Note:
- By default, Archive Cleanup evaluates up to 25% of the files in your account’s total backed-up data as candidates for deletion. This will prevent significant file deletions from happening in your account as a result of changes to the program settings or the content of your backup set. Additionally, you can adjust the percentage to suit your tastes.
- To make room in your account, Archive Cleanup permanently deletes material that is no longer present on your machine. Empty folders must be explicitly deleted by users in order to be removed from the account.
- Data from your IDrive account could be automatically deleted as a result of periodic cleanup. Be careful when using/setting this option.
- The reference to a percentage refers to the proportion of your account’s total number of files that are files that are being considered for deletion. This percentage-based control’s goal is to prevent significant file deletions from occurring in your account as a result of unplanned computer events.