How To Program BMW E90 Key Fob?

I was able to purchase a second wireless remote control for my BMW.

I’ve come across the following techniques for programming a second wireless key to operate your car’s doors:

Three approaches to test:

Approach 1:

1. Operating inside the car with the doors closed

2. Within five seconds, switch the ignition from position 1 to off.

3. After removing the ignition key, press and hold the unlock button for 15 seconds. Then, within a 5-second interval, press the key lock button three times.

4. Let go of the buttons.

5. Doors will lock and unlock to demonstrate that proper programming has taken place.

Approach 2:

One key that is already programmed and one key that needs to be programmed are required for this procedure.

1) Enter and lock every door.

2) Start the ignition and swiftly turn it off. Start the process now (no more than 5 seconds). 30 seconds must pass before the next action is taken.

3. Take out the first key.

4) To put the key closer to the antenna on the remote receiver, hold it up towards your left shoulder.

5) Press the lock button three times while keeping the unlock button depressed. As soon as the unlock button is released, the doors lock to authenticate the procedure.

6) Quickly carry out steps 4 and 5 for key #2 and so forth.

If that doesn’t work, try pressing the keys in reverse. vs. 1 then 2, key 2 then key 1

Approach 3:

1. Quickly turn the key to position 1 five times. 2. Take out the key. 3. Hold the unlock button while pressing the lock button three times.

4. Within 30 seconds, press the same button if you have another key. 5. To complete, turn on the ignition.

Now that I am aware that these techniques work for earlier models, are E90 models still compatible? Exists a new process? Or not even possible?

In This Article...

How to Use Your BMW Key Fob Remote

Although pre-programmed for your car, your key still needs to be activated in order to be used.

Hold your new key fob flat on the dim battery indicator next to the steering column to accomplish this. After then, keep pressing the start/stop button until the “no key” warning light goes out. To check that activation was successful, press the start/stop button once more.

If this doesn’t work, you might need to activate your new key while removing your old key fob from the signal range to avoid interference. To accomplish this, first unlock your BMW with the existing key before having someone carry the key a short distance away from your car. After that, you can push the start/stop button while holding your new key against the steering column.

How do I set up my BMW keyless entry remote?

Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.

How is a 2010 BMW key fob programmed?

BMW Smart Keys:

Start the vehicle by placing the new key fob against the designated location on the right side of the steering column. It only required that to make the new fob functional. In reality, the Nav screen appeared right away and asked for a name for the profile connected to the new key fob.

One crucial detail is that this will only function with a “NEW” smart remote or key. In order for the instructions in this thread to function with a used smart key, it must first be “FLASHED” or reset.

If that doesn’t work, try pressing the keys in reverse. 1 then 2, as opposed to 2 then 1.

4. Within 30 seconds, press the same button if you have another key. 5. Start the engine to complete.

PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip for the immobilizer (vehicle starting) cannot be programmed; a professional must do it. You must use diagnostic tools to have your remote configured to your vehicle at your neighborhood dealer or locksmith.

Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.

Was this Knowledgeable? Please consider making a gift of any kind to support this blog! Your contributions aid in the upkeep of this website. We appreciate your visit and donation.

How is a 2009 BMW key fob programmed?

Quickly turn the key to position 1 five times.
Key removed.
Press the lock button three times while holding the unlock button in place.
Within 30 seconds, press the same button if you have another key. 5. Start the engine to complete.

How is a 2006 BMW key fob programmed?

Hold the unlock button down while pressing the Round (lock button) three times with the working key, then let go of the unlock button. Ideally, doors lock and unlock. Hold the unlock button down while using the new key to press the Round (lock button) three times before releasing the unlock button. Once the doors lock and unlock, you’re done.

How can I program the key for my BMW 3 Series?

Turn the ignition of the automobile five times fast to position 1 and back. Remove the ignition key from the car. Press the BMW logo three times while holding down the unlock button, and then let go of the button. Within 30 seconds of the initial key programming, repeat step 3 if you want to program any additional keys.

Can you program your own BMW key?

Take the BMW key fob you want to configure, hold down the unlock button, and then press and hold the BMW logo three times. The doors should lock and unlock once more. When this occurs, you are ready to go! You’ve set up your BMW key fob.

How can I program the key to my 2008 BMW 528i?

PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip used by the immobilizer (which prevents the automobile from starting) cannot be programmed; this must be done by a professional. You must use diagnostic tools to have your remote configured to your vehicle at your neighborhood dealer or locksmith.

Was this Knowledgeable? Please consider making a gift of any kind to support this blog! Your contributions aid in the upkeep of this website. If you are unable to donate, please share the information below via social media; your assistance in spreading the news about us is just as helpful! Thank you for coming, contributing, and spreading the word to your loved ones!