Under circumstances where there is less traction, the Variable Torque Management 4WD System (VTM-4) automatically distributes varying amounts of engine torque to the rear wheels.
In This Article...
When your VTM-4 light illuminates, what does that mean?
One or more of your tires are considerably underinflated if this light is on. As soon as you can, stop and inspect your tires. When the car is moving faster than 18 mph (30 km/h), the VTM-4 Lock will momentarily disengage.
How can the VTM-4 light on a Honda Pilot be turned off?
On a Honda Pilot SE, the VTM-4 system is fully automatic, constantly on, and shouldn’t need any driver input. There are techniques to momentarily disengage the VTM, though, if you detect it starts to occur suddenly.
Any of the following techniques will turn off the VTM-4 on your Honda Pilot:
- After a little delay, switch the ignition to the lock position and start the engine again.
- Press and hold the VTM-4 button, which is normally found on the dashboard adjacent to the radio, while the car is moving.
- While stationary, move the drive selector lever to P and then back to D.
The VTM-4 is the four-wheel-drive system in your automobile. Depending on the amount of available traction, it transmits engine torque to the appropriate driving axle. Bring your automobile to a repair if the system starts to operate at odd times when it shouldn’t because this could be a sign of a more serious issue.
Jerry can help you save money on your auto insurance while you wait at the mechanic, which will help defray the expense of the repairs.
How can I switch the VTM light off?
When the Honda Pilot moves more quickly than 18 mph, the VTM-4 lock disengages momentarily. The VTM-4 Lock will re-engage if the vehicle’s speed falls below the same speed threshold, therefore the disengagement is just momentary.
In all situations, the VTM-4 Lock indicator light stays on until the driver explicitly deactivates the feature. You must take one of the following actions in order to deactivate VTM-4:
- A lock or “0” position should be selected on the ignition switch.
- Shift the lever to “D” (drive).
- In order for the indicator light to go out, press the “VTM-4 Lock” button.
Your Honda Pilot returns to VTM-4 auto mode after the VTM-4 Lock disengages. Now you may use the VTM-4 system to regulate your traction needs whether driving normally on paved roads or even in slightly difficult terrain.
When the VTM-4 light is on, may I drive?
Four-Wheel Drive (VTM-4). Automatic system on and off times. If it activates, it indicates that your car has less traction at that specific time.
The VTM-4 light typically causes little concern. It only indicates that your torque management system is at work to make up for poor driving circumstances.
If the VTM-4 light continues to illuminate under regular driving conditions, you may have mistakenly depressed the VTM-4 LOCK, which will keep the light illuminated regardless of the situation.
It is not advised to dive with the VTM-4 LOCK on unless it is necessary. Simply pull over, put the car in park, and switch the ignition off. The light ought to go off shortly after you begin your car and put it in drive.
The excellent safety feature VTM-4 might assist keep your automobile from becoming damaged. However, it can’t cover all potential harm, so you’ll need reliable auto insurance for the rest.
Use Jerry, a free automated automobile insurance broker software, to find the best insurance at the lowest rates. In only a few seconds, Jerry will compile more than 50 personalized quotations from the leading insurance companies!
The quickest and simplest approach to lower your insurance costs is Jerry. The software saves drivers, on average, $887 annually!
Driving a car with the check engine light on is it safe?
Panicking when you see your check engine light come on is definitely not safe. Keep your composure and evaluate the issue to decide what to do next. It’s advisable to stop at a secure location and conduct this fast evaluation. If your car’s check engine light is on, pull over and ask yourself if it is safe to continue driving.
Did I just fill up with gas? Check engine light triggering factors include a loose gas cap. Even though the light might not come back on right away, checking to verify if your gas cap is tight is a simple troubleshooting step.
If so, did it jolt or vibrate? Your spark plugs could be the blame for this. It’s important to contact for a tow truck and make a repair appointment as soon as you can if your automobile is making strange physical movements that make it impossible to drive.
As the light turned on, did I hear anything odd? You should stop driving at this point and get your car checked out by a mechanic as soon as you can. When deciding whether to drive yourself or contact a tow truck to a local repair shop, use your best judgment.
Is there a flashing light? There are typically two different types of check engine lights: solid and flashing. An engine overheating issue or an engine misfire, both of which can result in irreparable damage, are more serious issues that are indicated by a flashing light. If the check engine light is on and flashing, pull over, turn off the vehicle, and dial 911.
Does the color of my check engine light vary? Know how to drive your car. Some cars feature a red check engine light that means you need to pull over right away and a yellow check engine light that indicates a non-emergency condition that should be addressed shortly.
The Honda Pilot never shifts out of 4WD.
The automated Honda Pilot can determine when to engage the rear wheels, so it isn’t always in all-wheel drive. To deliver torque to various wheels, Honda’s Real-Time AWD with Intelligent Control System continuously assesses the state of the road.
When necessary, it rapidly and effectively activates the AWD system, functioning faster and more effectively than mechanical AWD.
What does the Honda Pilot’s check engine light signify?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise against driving if the check engine light is blinking on your Honda Pilot. Instead, book Honda service right away.
The VTM is what?
a Viral Transport Medium (VTM) with or without a swab that complies with WHO and CDC standards
The quality of the specimen and the conditions in which it is transported and stored before being processed in the laboratory play a significant role in the success of the diagnosis of SARS-CoV-2 (2019-nCoV) during the COVID-19 outbreak.
Chlamydia, mycoplasma, and viruses can be safely transferred using viral transport medium (VTM) for use in standard cell culture procedures, diagnostic procedures, and molecular biology investigations.
Commercially prepared viral transport media are offered in a plastic screw-top tube with buffered proteins (serum, albumin, or gelatin), antibiotics, and proteins (albumin, albumin, or gelatin). Since contaminating bacteria and fungus are typically suppressed by antibiotics in viral transport media, separate samples from the same location should be taken if bacterial or fungal cultures are also required.
Our viral transport medium is composed of heat-inactivated fetal bovine serum, Gentamycin, and Amphotericin B and is based on Hanks Balanced Salt Solution (HBSS) with Calcium and Magnesium. The CDC and WHO recommendations are followed in the creation and composition of the viral transport medium.
In order to give customers the widest possible selection of sample collection options, the product is supplied as a liquid in a sterile 13 ml flat bottom tube with or without a swab.
Why is the flashing of my check engine light?
A considerably more serious problem is indicated by a flashing check engine light. Most frequently, it indicates a misfiring engine and unburned fuel entering the exhaust system. The catalytic converter’s temperature rises as a result, which may seriously harm it.
What does the Honda Pilot’s VSA light mean?
VSA, or vehicle stability assist, is a computer technology from Honda that works to make sure the tires have grip so you can stay on the road. When both the check engine light and the VSA light are on, the computer has likely identified a potential systemic malfunction.
What causes the check engine light to come on most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
What is the most typical issue when the check engine light is illuminated?
Your oxygen sensor may be faulty, which is one of the most frequent causes of your check engine light. Western Washington’s local auto repair shop can rapidly replace it for you, restoring your car’s capacity to gauge unburned oxygen in the exhaust system.
Your engine will continue to use more fuel than it should up until you replace this component, which will decrease your car’s fuel efficiency. A new oxygen sensor will also assist you in avoiding harm to your spark plugs and catalytic converter.
What does a check engine light that is solid yellow indicate?
After a long day at work, you get into your car and look forward to an adventure on the open road. However, as soon as you turn the key in the ignition, a bright yellow check engine light appears on your dash. Be composed. The indicator light serves as a warning, but it doesn’t always signify that something significant is wrong.
What the check lights are communicating to you.
To monitor what is happening inside your car, the onboard diagnostic system interacts with various components of it. A warning indicator light is sent to your dashboard when there is a problem with the electronic control system to let you know there is a problem. Depending on how the light appears on your dashboard, you can determine whether it’s a serious or minor problem.
It’s not usually a significant problem, but the constant yellow light is alerting you to take a look and solve the small problem as soon as you can. The engine of your car is misfiring if the light is flashing, therefore you need to look into the issue right away. If you don’t think it’s safe to drive, you don’t need to stop immediately away. However, you run the risk of damaging the engine of your car if you ignore the bright or flashing light. If your engine light illuminates, we advise performing the actions listed below.