An issue with the system itself exists if the VSA System Indicator illuminates and remains lit. If you see it, stop when it’s safe to do so, turn the engine back on, and continue driving. If the light comes back on, schedule a service inspection to find the problem.
In This Article...
Different sized tires
Your VSA will be aware if one or more of your tires are not rotating at the appropriate speed. The caution light turns on! Make sure you heed the advice in your car’s owner’s manual; Honda suggests a tire size for a reason.
Something went wrong in the engine
Many Hondas will also turn off the VSA if something is wrong with the overall engine system. The warning light will consequently naturally begin flashing.
If your dashboard is lit up, you probably have an other problem, such as an engine problem, and your car is just letting you know that the VSA has been temporarily disabled until the engine is serviced and the code is cleared.
VSA system is broken
Although they are rare, VSA system problems can occur. Therefore, if your indicator light is still on after ruling out all other possibilities, there might be a problem with the VSA.
The best course of action is to schedule a servicing as soon as possible with your favorite mechanic. You definitely don’t want the problem to worsen.
You turned VSA off by accident
Finally, it’s possible that you unintentionally turned off your VSA. There is a manual button that you can push to disable the Vehicle Stability Assist function in older vehicles.
For instance, the button is located on the center dash, above knee level, down to the left of the steering wheel on the 2006 Honda Accord.
The dashboard warning light has started to blink because if you bump or brush the button, you can wind up turning it off.
Why is my 2008 Honda Accord’s VSA light on?
Vehicle Stability Assist, or VSA, is a Honda-exclusive feature that helps steady the automobile during cornering if it turns more or
less desirable. VSA also helps you keep traction while you accelerate on slick or rough road surfaces. The complicated sensor system that controls the engine’s output and applies brakes only when necessary has a problem, which is why the warning light is flashing repeatedly. The control computer, wheel speed sensors, brake pressure modulators, connecting cable and sensors, and other components are all prone to failure. VSA is a crucial component of car safety equipment, thus you should unquestionably have a technician identify and fix the system’s problem. A VSA/traction control system diagnostic is the advised service to do in that situation. If you ask for that service, the qualified mechanic who arrives will take care of this for you right away. Please don’t hesitate to get in touch with YourMechanic again if you have any additional queries or worries; we’re always happy to help.
Driving while the VSA light is on is it safe?
While the VSA warning light is on, you can still drive because your braking and cornering abilities will be normal without the stability benefits the VSA System offers.
How can the VSA light be turned off on a 2008 Honda Accord?
Every time you start the engine, even if you had previously turned off VSA, it is activated. Your car’s braking and cornering capabilities remain unaffected if you switch off VSA, but the traction and stability enhancement it provides are less effective.
To turn VSA on or off, press and hold the VSA OFF button until you hear a beep. When the system is turned off, the VSA OFF indicator displays.
When a car becomes stuck in mud or snow, traction control stops working, which may make it simpler to try to remove it.
How much does a VSA system repair cost?
The VSA system repair typically costs between $80 and $90. The average price for Honda is this amount. With labor expenses ranging from $38 to $48 and parts costing about $43,
Author: DJ
Automotive technician Dave Junior has practical experience servicing, diagnosing, and repairing both domestic and foreign vehicles. He takes pleasure in writing and disseminating his knowledge.
How is the VSA on a Honda Accord fixed?
The traction control system is comparable to vehicle stability assist. It prevents the car from spinning out or veering off track. The sensors within the car that make up VSA measure how quickly your wheels are rotating.
If you’re traveling too fast for the conditions, the ECU will decide whether to cut off the engine’s power, apply the brakes selectively, or do both.
On your Honda Accord, you can increase wheel spin while retaining the ability to brake selectively by disabling the VSA. However, it is not advised to do this when it is raining since you risk losing control of your vehicle or hydroplaning, which occurs when your tires are being exposed to too much water while travelling quickly.
Only if you’re having trouble climbing a hill due to wheel spin or if you ever get trapped on ice and need a little extra power to get out of it will you need to turn off the VSA on your Honda Accord. Turn the vehicle stability assist back on once you’ve fixed the problem.
By pressing and holding the VSA button in this circumstance, your Honda Accord’s VSA can be turned off. Normally, the VSA button can be found under the left vent next to the steering wheel. Hold down the button until a beep is heard and the dash’s “VSA OFF” light indicator appears.
What does Honda Accord’s triangle with an exclamation point mean?
You’re not the only one who has ever been taken aback by an unexpected alert on your dashboard while waiting for a servicing appointment or driving. Although these lights might be frightening for any motorist, especially if you don’t know what they signify, our Fort Worth area Honda dealer is always available to assist.
If you notice a small triangle on the dashboard of your Honda car with an exclamation point in the center, there is an easy explanation. A malfunction with the Vehicle Stability Assist system in your Honda vehicle is indicated by this warning light, which also serves as the system’s emblem.
If your vehicle turns a little more or less than you would like while cornering, the Vehicle Stability Assist technology helps to steady your Honda. By controlling your car’s engine output and applying the brakes only when necessary, it can even help you maintain traction while accelerating on slick or sloppy road surfaces.
Why is the VSA system being checked?
Hello there Honda’s computer technology, known as VSA—for “vehicle stability assist”—helps make sure the tires have grip so you can stay on the road. When both the check engine light and the VSA light are on, the computer has likely identified a potential systemic malfunction. To learn more about what’s going on, have a technician download the diagnostic codes from the car’s computer and determine why the Check Engine Light is on. Driving the vehicle is still safe, but you should be aware that the traction control and ABS systems might not be functioning properly. Both of these devices keep an eye on the wheels to prevent them from locking up and skidding, which would drastically impair traction. This is crucial on a slick road because braking can easily cause the wheels to lock up.
How can my VSA be fixed?
Restart the engine to reset the system while keeping an eye on the VSA system indicator. Have the VSA system inspected by your Acura dealer if the indicator stays on or turns back on while you are driving. When the ignition switch is switched ON (II), if the indicator does not turn on, there can be an issue with the VSA system.
Is traction control and VSA the same thing?
Electronic Stability Control is the general term used to describe the VSA system’s primary purpose (ESC). The system also has traction control capabilities. On the driver’s side control panel, this button is located. Press and hold it until you hear a beep to partially disable VSA functionality/features.
What does VSA on a Honda Accord mean?
The exclusive name for the electronic stability control system found on Honda and Acura vehicles is VSA, or “vehicle stability aid.”
How is a VSA fuse removed?
The lid can be removed from the side hinges by opening the bottom and dragging it in your direction. On the passenger side of the dashboard, beneath the interior fuse box, is the VSA fuse box. Push the tab and raise the left side of the lid as shown to open it.
The yellow triangle light with the exclamation point is what, exactly?
This indicator does not directly identify a specific issue; rather, it alerts you to the existence of a Critical Warning Message that you should read as soon as possible. The triangle with an exclamation point is actually a catch-all warning light intended to inform you of problems that your other lights won’t pick up on!
How do I remove the triangle in my automobile with the exclamation point?
Turn off your engine and move to a safe spot on the side of the road if the triangle with an exclamation point Honda warning light, also known as the VSA light, illuminates while you are driving. Restart the engine to reset the system while keeping an eye on the VSA system indicator.