It’s crucial to understand that your airbag system is not operational if your SRS light is on. The airbag won’t inflate if you are in a collision. Your chance of being hurt in an accident may rise as a result. There are a few additional causes for your SRS light to remain on in addition to the SRS light recall.
Every time you start your car, it runs a check on all of its critical systems. A light will remain on to alert you to an issue if anything isn’t working properly.
Your airbag may remain on if your seat belt light is on or if your seat belt isn’t working properly. The airbag light might be turned off by tightening the seat belt.
Another potential offender is the seat sensor. Modern automobiles have sensors that can identify a passenger and sound an alarm if their seatbelt is not fastened. The SRS light may continue to be on if the sensor is malfunctioning. Under the seat, you can look for a damaged electrical harness.
The light will remain on if the airbag itself isn’t operating properly. Your airbag light can also remain on if the system wasn’t reset after an airbag repair. This may also be the reason if your airbag was deployed but the system wasn’t reset.
Last but not least, the airbag sensor or ECU could be harmed. This may develop over time or if the airbag isn’t deployed in a collision. This problem may also be brought on by water damage.
The best course of action if your SRS light remains on is to call your neighborhood Honda dealership. Since airbags are a crucial safety component, it is not advisable to try to fix the issue yourself.
In This Article...
Can I operate a vehicle with the SRS light on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What would activate the SRS light?
Your car’s internal computer has disabled the airbags if the SRS (Supplemental Restraint System) indicator remains illuminated. This indicates that there is a problem with the airbags. Although your airbags won’t deploy at random, they might not in the event of an accident, therefore it’s crucial to locate the issue and have it fixed by a qualified repair.
Your car’s SRS light will come on for around 6-7 seconds when you turn the key, then go out if it detects no abnormalities. You may have an issue with the airbags itself, a loose wire, a broken seat belt buckle, or an issue with the Engine Control Unit (ECU) if the SRS light remains on or starts flashing intermittently. To get you back on the road safely, our mechanics at My Auto Solutions in Buford, Georgia, provide airbag module reset, removal, and installation services.
How can I make my SRS light turn on?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
What is the price of replacing an airbag sensor?
Depending on the automobile model and labor charges, the cost to replace an airbag sensor ranges from $100 to $600. A sensor for an airbag costs between $50 and $300, as does the labor.
Both the airbag sensor and its replacement are delicate parts. Even for an expert, correctly diagnosing and installing the airbag sensor can take up to two hours.
The airbag sensor itself is typically not very expensive; you may anticipate paying between $50 and $300 for a brand-new one. Never purchase aftermarket sensors; don’t take the chance. Always purchase OEM original, authentic items.
You can save money by replacing the airbag sensor yourself if you are highly confident working on cars and meticulously following the repair manual.
If you have even the least qualms regarding the replacement, have a pro handle it.
Keep in mind that it is a crucial component, therefore installing it properly is important in case of an accident. Additionally, if you make a mistake, there is a chance that all of the airbags in the car will deploy, which will cost thousands of dollars to fix.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
How is SRS fixed?
The SRS light might illuminate for a variety of reasons. Utilizing a diagnostic scan tool is the simplest way to identify any SRS or airbag system issues.
The SRS light’s most frequent reasons are listed below:
Seat Belt Latch Failure
Sensors in the SRS keep track of when the seat belts are buckled. The connection may be hampered if anything has gotten within the buckle.
Remove any foreign things from the seat belt buckle to solve the issue. Spray some compressed air into the buckle if you don’t see anything.
Defective Passenger Seat Occupancy Sensor
There is a sensor that warns the SRS system if someone is seated in the front seat. It reads weight in addition to alerting the sensor when someone is nearby.
The passenger airbag will be ready to protect the occupant if there is an adult in the seat. However, if the sensor is malfunctioning, the SRS light may turn on.
Corrosion
Corrosion within your vehicle due to water damage can develop quickly. This might be disastrous if it happens among the SRS parts. It may not only result in the warning light turning on, but it may also have an impact on how well the system works.
Corrosion must be extensively inspected in all of the components if this issue is to be resolved. Everything that has been impacted must be replaced.
Bad Clockspring
The steering wheel contains this electrical connector. Its major job is to keep the SRS computer and the wheel connected when the wheel is rotating.
However, a lot of hate is frequently directed towards this section. The driver’s side airbag might not inflate in an accident if it stops operating. The SRS light will also give you a warning to let you know what is going on.
Dead SRS Computer Battery Backup
In order to store the data it receives, the SRS computer needs a backup battery. When the engine is off, the battery still functions.
The SRS light may turn on if the battery is running low or dead. The installation of a new battery is the sole solution to this problem.
Previous Accident
After an accident, if the airbags did not deploy, your SRS light can turn on. The system was most likely activated during a collision by the crash sensors.
But if something went wrong and your airbags failed, a fault signal would be transmitted to the computer. As a result, the computer needs to be reset, as indicated by the SRS light.
Faulty SRS Computer
All electrical parts degrade with time. The SRS computer is susceptible to failure just like any other computer. Its demise may be caused by heat, severe vibration, aging, and water damage.
The only fix for a dead computer that causes the SRS light to illuminate is a replacement.
With the SRS light on, will airbags activate?
When the airbag light comes on, the vehicle’s airbag system is malfunctioning. Due to this flaw, the airbag is unlikely to deploy after an accident. As a result, it is not advised that you use the car until the system has been fixed.
Never disregard the important caution. There’s no need to gamble with the car, even though it doesn’t make it unsafe to drive.
The light does, however, show that the SRS parts are not functioning properly. This may potentially indicate that the airbags won’t activate in the event of a collision. You shouldn’t wait until you are involved in an accident to determine whether the airbags will keep you safe.
How much does a Honda Civic SRS light repair cost?
Cost estimation for the replacement of the occupant sensor in a Honda Civic. A replacement air bag occupant sensor for a Honda Civic costs, on average, between $974 and $999. While parts are priced at $878, labor costs are predicted to range between $96 and $121.
Can the airbag light self-reset?
It’s time to discover how to reset the airbag light now that we understand how airbags work. If you are not completely confident in your abilities, have only professionals operate on the airbag system. To reset the airbag light, adhere to these instructions:
Step 1: Check the passenger airbag switch
There is a “passenger seat Airbag on/off button” in some autos. When attempting to remove the airbag light, you ought to start by doing this. It’s possible that someone turned it to Off by accident before you, which will cause the airbag light to remain on in most cars. If you open the passenger door or glove box, you might be able to view this button, which is often located on the passenger side of the dashboard.
Step 2: Read the trouble codes with an OBD2 Scanner
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Step 3: Repair the fault
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.