The low tire pressure warning is paired with the TPMS fault indicator. The indicator flashes for about a second after the system discovers a problem.
In This Article...
Low tire pressure reset
On the Hyundai Tucson, there is no option to restore low tire pressure. Drive your car for 5–10 miles if you notice the warning symbol and all of your tires are inflated to the required levels. You will need to go to your local Hyundai dealership to have all the sensors professionally inspected if the warning light is still on.
The warning light on some Kia vehicles shuts off when the air pressure is topped off, despite the fact that this is not advised. If the suggested air pressure for your car is 32, for instance, try filling it up to 35 and then driving for a few miles. Remember that increased air pressure may reduce driving comfort and result in uneven tire wear.
The individual tire pressures won’t be visible on the cluster LCD display if the TPMS isn’t working properly.
- After a brief drive, check the tire pressure monitoring system display in the instrument cluster to frequently check your tire pressure, such as once a week.
- Please be aware that, especially if your car isn’t used frequently, tires might naturally lose one to two PSI per month.
- Also keep in mind that tire pressures can change with temperature, so it’s best to check them right as you start your car up.
- Verify that your tires are properly inflated in accordance with the information placard on the driver’s side door jam of your car.
to restart The tire must be inflated to at least 35 psi. For more than a week, I attempted this with 32. Go above 35, a friend said. Drive it; I turned it off, but when I turned it back on, it was broken. The answer is 35.
After inflation, how do you turn the light off? I keep asking that, but all I get are these useless answers!
How should I respond if the tire pressure sign illuminates?
The Hyundai Tucson is a fantastic vehicle, and if there is a problem with the tires, you will get a warning sign on your LED screen.
The graphic will clearly show you the problem the automobile has identified as well as which tires require attention.
Once the tire pressure has been adjusted to the proper PSI (this information can be found on the door placard or in your user manual.) You might observe that the sensors’ recalibration can take some time.
You might want to calibrate the tire pressure monitoring device by following the straightforward instructions below if you believe the light should have turned off but hasn’t:
- Take a long drive while maintaining a constant speed of 50 mph; this will reset the pressure system and turn off the light.
Check out these more suggestions to try if this one doesn’t work:
- The TPMS reset button may need to be identified; it is typically found under the steering wheel. Check your user manual for its location if you can’t find it.
- Once you’ve found it, turn on the ignition of the automobile, but do not start the engine. When the button blinks three times, let go of it.
- The sensor may need to refresh for 20 minutes or so before you may start the car.
Other pointers for resetting the TPMS light are as follows:
- All tires, including the spare, should be steadily inflated to slightly over the recommended PSI. Then totally deflate each tire. Once this has been accomplished, properly PSI-inflate the tires.
- It may be necessary to unhook the battery cable from the sensor, start the vehicle, and honk the horn for a few seconds in order to deplete the sensor’s power. This will release any remaining power in the car.
- When you’re done, re-connect the battery, and the TPMS should be fixed.
Visit a Hyundai dealership so that they may conduct a thorough sensor health check if you’ve noticed that the light is still on.
Verify the tire pressure.
- When the cluster is in warning mode, you can check the tire pressure.
- See chapter 4’s “LCD Display Modes” for more information.
- After a few minutes of driving after the original engine starts up, tire pressure is shown.
- The message “Drive to show” will appear if the tire pressure gauge is not visible when the car is stopped. Check the tire pressure after driving.
- The tire pressure numbers that are presented may not match those obtained using a tire pressure gauge.
- In the User Settings mode on the instrument cluster, you can modify the tire pressure unit.
- kpa, psi, and bar (See chapter 4’s “LCD Modes”)
On a 2022 Hyundai Tucson, how do you reset the tire pressure indicator?
Usually found somewhere under the steering wheel, the reset button for the tire pressure monitoring system. Till the tire pressure monitor system light blinks three times, keep the reset button depressed. The sensors should reset about 20 minutes after you restart the vehicle.
How can I determine my tires’ PSI?
Put a little dot or bead on the back of the tire pressure gauge and quickly press it into the tire’s valve stem’s center. The air escaping from the tire should be audible. To check the tire pressure, use the gauge. Follow these instructions again and again until the proper psi is reached.
Why does my tire pressure light come on in Hyundai when my tires are fine?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.
How does the tire pressure sensor on a Hyundai work?
Hyundai vehicles are equipped with TPMS, or tire pressure monitoring systems, which may detect low tire pressure in any of the car’s four tires and issue an alert. According to the table below, a TPMS from one of two manufacturers is installed as a component of the valve assembly in every Hyundai vehicle.
According to the table below, a TPMS from one of two manufacturers is installed as a component of the valve assembly in every Hyundai vehicle. The tire pressure monitor ECU/receiver receives the data from the sensor, which detects the pressure and temperature inside the tire, together with the TPMS’s distinctive ID.
If the TPMS ID is stored with the ECU, the placard pressure is checked with it, and if there is a pressure difference, a warning light is illuminated on the dash-mounted display.
Why, after filling the tires, does my tire pressure light remain on in a Hyundai?
If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.
Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.
How can I determine whether my tire needs air?
- Pull your car onto a flat, shaded area.
- Remove the dust caps from the valve stems of the tires.
- For a limited period of time, firmly press the tip of your tire gauge against the valve stem of the tire.
- If the reading from the tire gauge appears to be unnaturally high or low, such as 85 psi or 1 psi, you should repeat the previous procedure, making sure that the tire gauge’s tip is correctly making contact with the valve stem.
- Press the gauge tip against the valve stem until you hear air leaking out if the recorded reading from the tire gauge is higher than the manufacturer’s suggested rating. Once more, check the tire pressure.
- You must re-inflate the tire if the reading is lower than advised. You’ll need to drive your automobile someplace where there is an air compressor if you don’t have one at home. There may be one at a gas station, but not all do. Driving with a flat tire is dangerous and can harm the wheel itself.
- Press the air hose’s tip firmly against the valve stem to fill the tire. You’ll hear air entering the tire subtly. Check the connection between the air hose and the valve stem of the tire again if you hear air leaking or spraying out.
- Once you believe you have added or released enough air, use the gauge to repeatedly check the pressure.
- Dust off the valves and replace them.
Rastetter underlined the need of keeping dust caps on when driving in the winter since they can prevent flat tires if water enters the valve stem and freezes within the tire.
Check the pressure in your spare tire while you’re at it. You don’t want to have a flat tire and then discover that the new tire is also flat.
Include these actions in your daily routine. Both your car and your wallet will profit from it. For more information, see the video below.
How is the tire pressure light reset?
Turn the key to the “ON” position with the engine off, but do not start your car. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the vehicle and let it run for 20 minutes to let the sensor reset.
How do I reduce the pressure in my tires?
You’ve now realized your tire is overinflated, right? Simply carry out the following actions to solve the issue and resume driving:
1. Find your valve stem by going to the overinflated tire. It appears to be a tiny black cap that protrudes from the wheel. To reveal the metal pin within, twist the cap to the left.
2. Use a tire air pressure gauge to check your pressure and record the results. You should now have a better understanding of where you need to make adjustments.
3. Release part of the air in the tire by pushing the metal pin in the center of the valve stem with the back of the air gauge. This should be done in short spurts, and you should frequently check the pressure.
4. Once it is within the factory standards, reattach the valve stem cap, and you are ready to go!
How can I fill my tires with air without a gauge?
Paying close attention to the little things pays off when it comes to autos. To ensure long-term durability, it entails getting every component in tip-top form. But occasionally, we must complete tasks without the aid of any tools. More particular, there may be instances where we need to fill tires without a gauge. Let’s find out if you’re wondering how to go about doing that.
It’s not required to use a tire pressure gauge to inflate your tires. It aids in obtaining measurements as accurately as feasible. It’s not the end of the world, though, if you don’t have it when the time comes to inflate your tires. Still, whenever you can, you should check the tire pressure. Without a tire inflation gauge, you can:
- Drive as close as possible to the air compressor at your neighborhood gas station.
- Before filling the tires, make sure they are cold.
- The tire’s valve caps should be opened.
- On the machine, adjust the pressure setting. You’ll need to exert personal control over it if this isn’t a possibility.
- Put the nozzle of the air compressor up against the valve stem.
- For 5 to 10 seconds, inflate.
- Check your tire with your eyes or your hands.
- Reinstall the valve caps.
It is feasible to inflate your tires without a gauge. But some specifics will need to be clarified. You cannot precisely fill your tires with air without a tire pressure gauge. Using a few tests, you can get close. Continue reading if you want to learn more about this and other things.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!