We decided to revive this tradition and make it a habit because we haven’t featured any BMW tips and tricks in a while. Of course, we can’t accomplish this without your assistance, therefore on this occasion, we kindly invite everyone to write us with any advice, techniques, or fixes for our gorgeous BMWs.
Today, we’re going to demonstrate how to reset the BMW inspection light, which illuminates on your instrument cluster when your car needs service. One of our friends has a 325i, and he frequently gets his oil changed at other places because those places don’t have a BMW reset tool.
Many of you probably already know this, but for those who are still fresh to the BMW world or have just never had to manually reset your light, this information might be useful.
- Off ignition (POS 0)
- When the key is in the first position, press and hold the trip odometer button (ACCESSORY)
- When you notice “Oil Service” or “Inspection” with “Reset” or “Re” in the display, release the button after around 5 seconds.
*Note: If your car has a “High” cluster, you can also view how much fuel you have left until your next service (in liters).
4. When “Reset” or “Re” flashes, press and hold the button once more for approximately five seconds.
5. To reset the Service Interval, briefly press the button one more while the display is blinking. You should see “END SIA” for around two seconds after the new interval has been displayed on the display.
*Take note that you cannot reset if the “Reset” or “Re” does not flash indicating that you have not reached the required minimum consumption level.
If you have attempted this process on any other models except the E46 3 Series, please let us know so we can update this post.
In This Article...
I recently had my MOT completed at a local testing facility rather than a BMW dealership, primarily because I didn’t realize the MOT had expired until this morning at the weekend and the nearby BMW shop is booked solid for the next two weeks.
Now that the yearly check is overdue and has a triangle by it, I want to clear the “Vehicle inspection” idrive notification.
Can someone please explain to me how to use the e-sys or EDIABAS software (which I have) and what button sequence to press on the dash?
To change the date to any other date, simply press the idrive button while on that screen. The user is able to reset the yearly inspection.
This is distinct from the scheduled maintenance because my just acquired 330e isn’t due for a service for another 6000 miles.
I don’t want to manually reset it if it’s important, like an inspection because of a recall or known defect, because it’s new to me.
How can I turn off the inspection light on my BMW?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
What does the BMW inspection light mean?
When there is a problem with the vehicle, such as an oil leak in the brakes, an issue with the engine belt, a malfunctioning microprocessor chip, or simply when the vehicle needs system maintenance and repair, an inspection light will appear on the speedometer.
How is the check reset on a 2017 BMW x5?
On my 2017 X5, how do I reset (turn off) the service indication message? The navigation screen displays it. We recently had our oil changed, but we declined the service for the cabin air filter. They were altered by me. After replacing the oil, the dealer did not reset the indication.
Do you have any programs or apps similar to BimmerlinK? Or do you have nothing to work with, no tools, etc.?
If the latter is true (nothing), you can use the instrument cluster button to reset the service indicators. YouTube is filled with tutorials that will show you how to do this basic task. Simply search for the manual for any BMW F chassis that features the basic, 6WA, or 6WB cluster. Useless instructions exist for BMWs with E chassis.
Do keep in mind that the instrument cluster test procedure’s commencement is fairly similar, so if you find yourself repeatedly seeing the TEST display rather than the SERVICE reset displays, you’re probably doing something somewhat incorrectly. Return to the videos to see what you might be missing.
By pressing the START button, you essentially turn the automobile on, but you DO NOT start the engine. Once the service you wish to reset appears, press and hold the odometer reset button. Press the odometer reset button and then adhere to the instructions.
The first five screens of my service are displayed here. When these pictures were taken, the service interval for my brake fluid had already passed (it’s orange) from when it was scheduled for the first week of June at the dealer. Their screens are green because I changed the oil and the filters myself because they were due in June 2021. After I finished the work, the dealership reset the brake fluid. I also reset the oil and vehicle inspection.
Even if you didn’t have them perform the vehicle check, you could still take the car back and have them reset the service display for the work they did. However, if you read the instructions and experiment with the reset process, you’ll notice how simple/easy it is to do.
Another piece of advice is that the oil service is made to block numerous short periods, so once it’s reset, you can’t reset it again until you’ve driven a certain number of miles.
The service interval was reset because I did the oil and filter changes myself.
then have them reset the interval so you can view the final two pictures below:
How can I reset the settings on my BMW?
How do I remove my personal settings and data from my BMW? Select “CAR menu” > Settings > General settings > “Reset vehicle data” on your BMW with Operating System 7 to reset your personal data and settings. Reset car data by choosing “Menu” > “System settings” on your BMW with Operating System 8.
What is covered by the BMW inspection 1?
Inspection 1 is the first thorough examination performed as part of your planned BMW maintenance to ensure that all safety features are functional and to improve your vehicle’s general performance. BMW Inspection 1 serves as a prerequisite for Inspection 2, which is required at higher mileage.
The BMW Inspection 1 service schedule varies according on the age and mileage of your car. If you want to know if your service is due, please consult the chart below;
- Oil and oil filter changes
- Check to see that the engine is operating at the proper temperature.
- Your gasoline connections, lines, and tanks will be visually inspected for leaks, and the power steering system, rear axle, and transmission will be checked as well.
- Verify the exhaust system’s overall condition, mounting and placement, and leaks.
- Examine the bushings and control arms for wear.
- Verify the condition of the steering system overall and for excessive play.
- Examine the thickness of your brake pads, clean the brake pad contact areas, and inspect the brake disc surfaces.
- Check the connectors for the clutch system and the brake lines for leaks, corrosion, and proper alignment.
- Check the parking brake cables’ location and movement.
- Check anything with our BMW computer system.
- Check the levels of your brake, clutch, antifreeze, coolant, and windshield washer fluid and make any necessary adjustments.
- Check the hose connections on your engine’s heating and cooling system for leaks.
- Check to see if your air conditioner is functioning properly.
- Check your battery’s electrolyte levels and run a battery load test.
- If necessary, reset service indications.
- Check the tire pressure in all of your tires, including the spare.
- checking tire wear and tread depth, realigning or making required corrections
- Lubricate the wheel hubs.
- Verify the operation of all interior and external lighting.
- Check the illumination and control of your dashboard, instrument panel, and indicator lights.
- Verify the effectiveness of your washer and wiper system.
- Check the functionality of all the doors and closures, the grease hood, the trunk or tailgate, and the door latches.
- Check the operation of the safety belts, and visually inspect the air bag systems for any evident damage or ripped covers.
- Check the operation of the heaters, air conditioners, and defoggers.
- Make that the mirrors are functioning properly.
We will put your car through a brief road test in order to confirm that everything from BMW Inspection 1 has been checked twice and that everything is in functioning condition.
In addition to high performance OEM manufacturers that frequently go above and beyond manufacturer specifications, we use and suggest authentic BMW components for repairs. With the exception of parts for high performance applications, the majority of the components can only be purchased directly from BMW, and in our opinion, BMW supplies the greatest quality components for your car.
A BMW inspection 2 service is what?
The BMW Inspection 2 Service is, in essence, a manufacturer-developed checklist of essential components to check and/or service on your BMW at regular mileage intervals. This keeps your BMW well-maintained and operating efficiently.
What is the time required for a BMW computer to reset?
Amazing detective work produced the solution! Unplugging the negative battery cable for 10 to 15 minutes will reset a BMW ECU. For most BMW models, this ought to be sufficient to reset the ECU.
What exactly does a BMW inspection 2 service include?
- oil filter replacement (with genuine filter).
- Castrol TWS 10w60 engine oil should be used to replace old oil.
- air filter replacement
- Change of the microfilter (pollen filter).
- changing the fuel filter.
- replacement of spark plugs (x6).
- Check valve spacing
What does it imply when a BMW has a red exclamation point?
Exclamation Mark in a Circle: If this light appears on your dashboard, it may mean that either your hill assist feature isn’t functioning or that your brake fluid is low (red) (yellow). Either one need a checkup to be fixed.
How frequently should a BMW be maintained?
About every 5,000 miles, or in a year or two, you’ll bring your model in for maintenance. No matter how long you drive on the roads around Philadelphia, the BMW Maintenance Schedule is designed to keep your car running at its peak.
What does a vehicle inspection service entail?
An expert engineer examines the secondhand car you intend to purchase during a car inspection. They will perform a thorough and totally impartial examination of the condition of the car.
If they’re kind to you (i.e., a good provider), they might even offer you with a report on the history and condition of the vehicle. Because we’re extra polite, we provide a thorough buyers report that includes a MOT history and a ton of other details for a tidy 30-day access price or one-time report fee.
Our next point is related to fees; vehicle inspections are expensive. In fact, you’ll have to spend at least a few hundred pounds on them. You might be asking what exactly you’re getting for that since it’s a reasonable amount.
You will receive a checkup of the exterior and inside as well as a mechanics inspection in return for your hard-earned money. This entails, among other things, examining the clutch, steering, front and rear suspensions, steering system, and electrics. Typically, the inspector will perform a road test. Additionally, certain packages may come with add-ons like looking into the car’s history and previous records for a cost.