Registered
Read an interesting post about this. I want to know what happens if you disconnect the battery because I’m new to iDrive. or disable the iDrive’s control fuse?
I’m not sure, but you might not want to completely disconnect the batteries in a BMW without taking some precautions because I’ve heard that if the car loses all power, it might enter an anti-theft mode. I’m not sure because I don’t work on my autos.
Anyhow, that wasn’t the type of reset the OP was referring about (nor the one I was talking about).
When you lock the car and turn it off, iDrive completely shuts off for roughly 12 minutes. In most BMWs, you can restart the computer for the idrive system, navigation, etc. by holding down the volume button for 20 to 25 seconds constantly. The volume is only momentarily turned off when the volume button is pressed; the system is not restarted.
In This Article...
Can BMW idrive be reset?
Connected Drive by BMW. Select “CAR menu” > Settings > General settings > “Reset vehicle data” on your BMW with Operating System 7 to reset your personal data and settings. Select “Menu” in your BMW with Operating System 8. Reset vehicle data under “System settings”
How is a BMW manually reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this (See image example).
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 (taken from the image above). Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears (you will still see numbers in the top section).
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on (from the example above) This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button (also theentering code menu).
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
On a BMW, where is the reset button?
Details regarding your unique BMW model can be found in your owner’s manual. Till the service notice shows, press and hold the tiny odometer button in the instrument panel’s lower left corner. When the message asks “Reset?” release the button, then press and hold it once again. Press and hold the button while releasing it once more.
How can I clear the BMW Service Due display?
Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message says “Reset,” let go of the button and press and hold it once more.
How can I check the service on my BMW iDrive?
If your car has iDrive, you may retrieve the service history by going to Vehicle Information -> Vehicle Status -> Service Requirements -> Service History. You may see illustrations that outline each step on the left side of the page. You will also be able to see the dates of the most recent maintenance and the work that was done if your automobile was built after March 2009.
Additional methods for gaining access to your car’s history are as follows:
- You should check the warranty details, as a good reminder. This will inform you of any remaining coverage or associated benefits. as well as looking over the vehicle health report. This will give you a general idea of the situation and any problems that can arise.
Updates to BMW iDrive are possible?
Only sometimes is a complete update advised. The most typical BMW iDrive upgrade is a partial software update. Bluetooth(r), multimedia systems, and mobile device compatibility are all included in this. You can complete this quick BMW iDrive upgrade at home in Cranston, and we’ll show you how to do it below.
How can I evaluate my BMW iDrive?
The iDrive system’s navigation is a crucial component that makes getting from A to B simple. But since roads and sites of interest constantly change, it’s critical to maintain your BMW’s GPS maps updated if you want to get the most out of your iDrive.
Many of the most recent BMW models include over-the-air (OTA) map updates, which use the vehicle’s integrated SIM card to automatically download the most recent map data. The procedure in these automobiles is comparable to updating your smartphone to the most recent iOS or Android version; all you have to do is restart your car after your iDrive has downloaded the data.
For vehicles that do not allow OTA updates, a manual upgrade is necessary. Previously, updating BMW navigation maps required changing a DVD holding the map data. More newer vehicles include built-in hard drives that hold the data, allowing you to update your map by overwriting the hard drive’s contents. You can accomplish this with BMW by connecting a USB stick with the updated map data to the USB port in your vehicle.
It’s a good idea to determine which map version you need, which relies on your iDrive system, before purchasing a new BMW map. Use the settings menu when your iDrive navigation is open to navigate to “Navigation system version,” where you can see the region, version, and year of your current GPS data.
How do I delete my iDrive?
You can create a one-to-one match of the local data in the backup set to your account using the Archive Cleanup tool.
If you remove data from your computer that has previously been backed up, that data will also be permanently removed from your IDrive account.
- Click Archive Cleanup in the tool bar under the Backup tab.
- Then select Cleanup Now. A list of the items you want to remove from your account will be generated by IDrive.
- To permanently remove the files from your account, click Delete.
Alternately, you can create recurring automated cleanup by checking the Periodic Cleanup box. Decide how many days and what proportion of the data should be cleaned up.
Note:
- By default, Archive Cleanup evaluates up to 25% of the files in your account’s total backed-up data as candidates for deletion. This will prevent significant file deletions from happening in your account as a result of changes to the program settings or the content of your backup set. Additionally, you can adjust the percentage to suit your tastes.
- To make room in your account, Archive Cleanup permanently deletes material that is no longer present on your machine. Empty folders must be explicitly deleted by users in order to be removed from the account.
- Data from your IDrive account could be automatically deleted as a result of periodic cleanup. Be careful when using/setting this option.
- The reference to a percentage refers to the proportion of your account’s total number of files that are files that are being considered for deletion. This percentage-based control’s goal is to prevent significant file deletions from occurring in your account as a result of unplanned computer events.
BMW iDrive is it free?
All eligible BMW vehicles with the software installed are eligible for free registration with ConnectedDrive. For three years, most BMW vehicles come standard with it. BMW offers the majority of the Digital Services capabilities separately or as a trial since it understands that not all owners will want or require all of the ConnectedDrive functions.
The majority of these have different prices, ranging from PS1 for a one-month trial of real-time traffic data to PS79 for a map update for the My Journey system. BMW, on the other hand, offers four ConnectedDrive packages that range in price from PS59 to PS239 and run for a full year. As the price rises, each bundle includes more ConnectedDrive features.
Only BMWs with the most recent OS7 infotainment system and up receive Apple CarPlay for free, which may surprise some BMW owners. When their BMWs reach their third anniversary, some owners will still be required to pay up to PS265 for Apple CarPlay. In 2020, BMW vehicles finally offered Android Auto connectivity as an option, providing wireless integration to the vehicle’s infotainment system at no additional cost.
What is the most recent BMW iDrive version?
16 December 2021, Woodcliff Lake, New Jersey BMW customers are already receiving the most recent technological advancements with iDrive 7. Updates to the BMW News app featuring podcast-based news, the most recent Remote Software Upgrade (version 21-07), and the addition of SiriusXM’s Pandora channels are among them.
How much does a new BMW iDrive cost?
I’ve been wondering how much it would cost to upgrade to the newest IDRIVE, so I’ve been giving it a lot of thought. I want to upgrade to a new 2012 or 2013 IDRIVE with all the bells and whistles, but I’m not sure if it will be worthwhile.
Basic CIC idrives with maps, voice control, and video in motion cost between $2200 and $2500; occasionally, a backup camera can be included in that price.
On my 2008, I’ve been meaning to upgrade as well. a full cic with combos, a front pdc, and a rear camera was desired. Like the OP said, it has all the bells and whistles.
Please also PM me. I have a 2008 M3 and would really like the new CIC with the new controller, buttons, etc., Bluetooth playback for an iPod or Droid phone, new maps with a high-resolution screen, and a backup camera would be a good addition.
Any information you can give me regarding this refit would be greatly welcomed and useful. Alekshop said I would only need to drive to the dealership to have the software updated. TECH, if I installed the entire system myself, what tuning is required afterward.
You would need to get in touch with me outside of the forum since I’m no longer a merchant here.
I have a 2010 CIC system, but I don’t have internet access, sound streaming Bluetooth, or any BMW apps. I believe all I would need to upgrade to this level is a combox.
Do you market and code the combox? I’m attempting to put up one for the wife’s 2010 E70 2010 X5 with coding. Can you send me any information via private message? thanks!