How To Change Oil Hyundai Sonata?

Three quarts of engine oil should be added. Clean the engine oil dipstick by removing it from the dipstick tube. Reposition the dipstick inside its tube by pushing it in. Look at the engine oil level as you pull back. Pour in a half quart of oil and recheck the level if the oil on the dipstick does not stop between the two marks on the dipstick. Avoid overfilling.

Tools Required

  • Set of Metric Sockets
  • Drain Pan for Oil
  • Wrench for oil filters
  • auto ramps
  • Jack postures
  • A wheel chock

Boost the vehicle up on-ramps. Use jack stands to keep it safe. Affix wheel chocks to the tires towards the back.

Protect your Hyundai. Make sure the gear selection is in the Park position and apply the parking brake.

Access the oil drain plug and Hyundai filter. The Hyundai engine’s undercarriage should be removed. Plastic screws are used to secure the bottom plastic.

place the oil drain plug Oil drain plug replacement Install the new washer if you have one. To 30 lb-ft, tighten the oil drain plug.

Engine oil filter replacement Utilizing an oil filter wrench, remove the oil filter. Turning in the other direction will allow you to remove the oil filter. The area where the oil filter will be fitted should be cleaned. On the gasket of the new oil filter, apply a thin layer of clean oil. The replacement oil filter should be screwed in and hand-tightened until the gasket makes contact with the engine block. The new oil filter should be torqued to 8.5–10 lb-ft. The filter may typically be hand-tightened to 9 lb-ft.

How much oil does a Hyundai Sonata require?

If you’ve never owned a Hyundai Sonata before, you might need to be aware of the recommended maintenance schedule. What kind of oil, for instance, should you use in your car? You’re in luck since we’ve done a ton of research and have all the solutions below.

The recommended oil for a Hyundai Sonata is 5w-20 or 5w-30. When obtaining an oil change, you can select to use synthetic or conventional products, so keep that in mind. Every 3,500 to 5,000 miles for conventional oil changes and every 7,500 to 10,000 miles for synthetic blends.

The health of your car’s engine depends on the oil you use. This post will go over why it’s crucial to use the Sonata’s recommended oil types from Hyundai. Continue reading to find out the answers to more frequently asked questions about Hyundai Sonata oil changes.

Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!

How often should I have my Hyundai Sonata’s oil changed?

One of the most comprehensive and important services for your car is an oil change. For traditional oil, Hyundai advises changing your 2021 Hyundai Sonata’s oil and filter every 3,000 to 5,000 miles. Replacement of synthetic oil is advised every 7,500 to 10,000 miles.

What is advised by Hyundai for oil changes?

For traditional oil, Hyundai advises changing your Hyundai Santa Fe’s oil and filter every 3,000 to 5,000 miles. Although it is a good idea to check your owner’s manual to confirm the schedule for your particular Hyundai model. But a few things can influence how frequently you should replace your oil.

Which type of oil is suggested for a 2015 Hyundai Sonata?

That is incredibly kind of you! A 2015 Hyundai Sonata needs synthetic motor oil in the 5W-20 or 5W-30 range.

Most petrol stations and auto supply stores carry this motor oil. You will require almost five quarts to fully fill the oil reservoir if it is very low.

If you often drove her car while you were using it on loan, it could be worthwhile to have a full oil change. The amount for an oil change includes the price of the oil.

Will you purchase your own vehicle when you return hers? Regardless of whether you intend to drive your own automobile, make important to arrange your auto insurance. For example, there are non-owner coverage for those who drive but do not own a car.

Contact Jerry if you need assistance with the auto insurance procedure. You may reach one of our helpful agents by text or phone, and you can quickly alter your policy or compare rates using the Jerry app.

How often should an oil change be performed on a 2017 Hyundai Sonata?

For traditional oil, Hyundai advises changing your 2017 Hyundai Sonata’s oil and filter every 3,000 to 5,000 miles. One of the most important and beneficial procedures for your car is an oil change. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.

How long can I go without having my Hyundai’s oil changed?

When Should I Change the Oil in a Hyundai Car? A Hyundai vehicle shouldn’t typically go more than 7,500 to 10,000 miles without an oil change.

Hyundais require synthetic oil, right?

Due to the slower breakdown process, this Hyundai Elantra oil type needs to be changed every 7,500 to 10,000 miles. The suggested oil for Hyundai Elantra is often synthetic oil because it allows drivers in Fenton and beyond to travel farther between oil changes.

Can you combine synthetic and conventional oils?

You’ve come to the proper place if you have a question concerning motor oil, and this is a crucial question. Jiffy Lube knows oil, after all. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.

So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.

What happens if you over-oil your vehicle?

It will be easier to comprehend how using too much engine oil is a bad idea if you have some background information.

Oil is necessary for optimal lubrication and smooth movement in all of the hundreds of precisely engineered pieces that operate in concert at high speeds and temperatures. The “Oil” branded cap beneath the hood is used to add oil to an engine’s crankcase by you or your mechanic. When the engine is not running, the oil collects in the oil pan. An oil filter removes impurities that can potentially cause damage as the engine is started. The oil then flows throughout the engine.

The level in the oil pan rises when too much oil is applied. This enables the crankshaft, a rapidly moving lobed rod, to make touch with the oil and basically aerate it. A foamy, frothy fluid that is unable to adequately lubricate the engine is the end consequence. Imagine this as the process your engine uses to whip cream. Nobody wants their engine to be lubricated with whipped cream.

Another issue is that the additional oil puts too much pressure inside your engine, and that pressure will try to escape through various gaskets and seals. Leaks and expensive repairs will result if any of those fail.

How long beyond the due date can you skip changing the oil?

In general, cars may travel 5,000 to 7,500 miles without having an oil change. Additionally, you can go 10,000 or even 15,000 miles between oil changes if your car uses synthetic oil. To schedule your oil change right here on our website, skip the following paragraphs if you want to learn more about oil changes.

Can I replace the 5w20 in my Hyundai with 5w30?

It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.

Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.

5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.

If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.

Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.

Why is my car trembling after I changed the oil?

When changing engine oil, some individuals disconnect the oil pressure sensor to clean it. Your old, filthy oil will be cleaned of pollutants by doing this. But suppose you reinstall your oil pressure sensor incorrectly.

The oil levels won’t be precise in this case. Your engine may be operating with less oil than you are aware of. Your car may vibrate even after getting an oil change because low engine oil causes engine components to operate with more friction.

Your oil pressure sensor doesn’t need to be unplugged when you change the oil. You can flush your engine with a solution made for engine flushing to clean it while it’s still within your engine. By doing this, you can clear the oil pressure sensor of any accumulation. Alternately, remove your oil pressure sensor, clean it, and then replace it before adding fresh oil.

What happens when 5w20 and 5w30 are combined?

It is crucial to understand both oils in order to fully comprehend what happens in the engine when the two oils are combined.

The letter W in the SAE (Society of Automotive Engineers) format of the multi-grade oil designates that both multi-grade oils are acceptable for winter and, consequently, are suited for low temperatures.

The number before the letter denotes viscosity below zero degrees Celsius, while the number after the letter denotes viscosity at one hundred degrees Celsius.

Due to its increased viscosity, the 5W30 multi-grade oil is utilized throughout the summer and in tropical areas as it is more suited to use in hot temperatures.

This does not, however, make using the oil in cold weather unnecessary. However, the 5W20 oil performs better in colder climates.

So what will happen if you combine the two oils? Since the two oils have different viscosities and additives, they won’t completely combine to form a single oil combination.

Your engine might not immediately suffer if you combine the two oils for usage in an emergency.

However, using a combination of both oils in an unsuitable engine could cause serious long-term engine damage, including overheating, sludge buildup, oil leaks, and deposits.

Therefore, it is advised that you flush the oil and replace using the proper engine oil if you must use incompatible oil in an emergency.

Do 5w20 and 5w30 differ significantly from one another?

These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.