It’s easy to replace a burned-out number plate bulb:
- Find your license plate lights first. Most cars have two little lights right over the license plate. It’s a good idea to replace both of these bulbs at once, even if only one of them has blown. If one bulb blows, it’s likely that the other will not be far behind.
- A Phillips head screwdriver should work to remove the lamp cover. Each lid will have two screws. Put the screws in a secure location so you can replace them later.
- Old bulbs should be removed. Most of the time, it will be simple to remove. For confirmation that you have the right bulb, check the fitting on it (or the car manual).
- Place the new bulb in. LEDs can replace incandescent bulbs, however the replacement bulb should fit without any difficulty. Be careful not to touch the bulb’s glass.
- Reinstall the cover and tighten the screws.
- To check that your new light is functioning, start your car and all of the lights. LEDs should turn on right away but incandescent bulbs could need a few seconds to warm up. Ensure that the new bulbs you buy have enough brightness to clearly illuminate your license plate.
That’s all, then! If you fitted LEDs, your license plate bulbs should survive for a very long time. In order to prevent getting stopped by the police, make sure to check them frequently.
In This Article...
How do the fog lights on a Hyundai Sonata turn off?
After turning on the headlights, the fog lights will come on when fog light switch (1) is switched to the ON position. Turn the switch to OFF to turn off the fog lights. The fog lights use a lot of the vehicle’s electrical power when they’re on.
Why won’t the brake lights on my 2012 Hyundai Sonata turn off?
Due to a problem with the brake pedal assembly that, in certain cases, prevents the brake lights from turning off, Hyundai is recalling 304,900 Sonata cars from the 2011 and 2012 model years.
The brake pedal stopper pad, which can eventually wear down and allow the brake light switch to stay on after the driver lifts their foot from the brake pedal, is at problem. In these circumstances, the Sonata is capable of continuing to drive while the brake lights are illuminated in the “braking” position, which can give other motorists the wrong impression. Additionally, this issue can make it possible to shift out of park without depressing the brake pedal. Even while Hyundai reports that the second issue hasn’t resulted in any accidents, it is this second issue that is more concerning.
The Hyundai Sonata automobiles produced from December 11, 2009, to June 30, 2011, are subject to the recall campaign.
On January 11, Hyundai will begin the recall procedure, and dealers will apply the repair. Owners may bring their cars in to have this problem addressed at no charge; the fix simply entails installing a new stopper pad.
Owners should reach Hyundai customer service directly at 1-855-671-3059 and reference recall number 136 prior to the start of the recall. They can also visit the National Highway Traffic Safety Administration (NHTSA) website at www.safercar.gov or dial the vehicle safety hotline at 1-888-327-4236.
Ramey, Jay
For his own personal use, Jay Ramey has been drawn to the more adventurous end of the reliability spectrum because he spent his childhood around really unusual European cars.
Why don’t my license plate lights function?
The license plate lights on your car work properly if the relay switch is in good condition and there are no loose connections. Therefore, if you find that your car’s license plate lights won’t turn on, it’s possible that your relay switch is broken or that one or more cables are improperly connected.
It’s possible that the license plate lights are burned out in some instances. To determine why your car’s license plate lights aren’t working, try to determine if you are dealing with any of the issues mentioned above. In any instance, you might need to hire a skilled auto technician to assist you in resolving the problem.
Are LED license plates allowed?
There are no limitations on how many lights can be installed on the car. The back number plate’s adequate illumination is the only requirement.
Can the lights on license plate be too strong?
What generally applies: Number plate illumination should illuminate the full number plate surface and be bright enough but not too bright. Specific guidelines for color and brightness exist.
What is an unlawful license plate?
Illegal number plates can range from drivers using reflective number boards that block the characters on the plate from being seen by speed cameras when the flash is turned on, to using illegal fonts and designs, as well as spacing the numbers and letters incorrectly so that drivers can read them.
What is the purpose of 501 bulbs?
Wedge Bulbs 501 (W5W) Bulbs You can use these 501 car lights in your vehicle, van, or motorcycle. They can be used for a variety of purposes, including sidelights, indicators, interior lamps, and license plate lights.
What do fog lights on a dashboard look like?
Typically, you can find them next to the dial you use to operate your regular lights, on a stalk of the steering wheel, or on a button on the dashboard.
Your car’s dashboard or the actual fog light button will include a symbol that indicates whether the rear or front fog lights are on. This sign is typically an amber or green indicator.
If your automobile has automatic lights that turn on when there is insufficient light, make sure the lights are on because they might not in foggy situations.
Look in your car’s logbook if you can’t find them or figure out how to turn them on.
The Met Office predicts heavy fog for parts of the UK this week. Fog lights
How soon should I activate my fog lights?
According to the Highway Code, fog lights should only be utilized when visibility is less than 100 meters (328 feet), or about the length of a football field, in the fog.
When driving, failing to use your fog lights when necessary could endanger your safety and the safety of those around you.
Your automobile insurance may be void if you were not using your fog lights when you were involved in an accident while driving in the fog.
Make good judgments. Turn on your fog lights if the fog is so dense that you are having trouble seeing other vehicles. However, avoid turning them off and on repeatedly to avoid confusing other drivers.
Can a filthy license plate result in a fine?
Most people can put up with a less-than-perfect car, but did you know that having a dirty number plate might result in a fine? Drivers who operate a vehicle with an unreadable license plate risk receiving severe fines.
What serve fog lights?
The purpose of fog lamps is to supplement low beams. The lamps are made to shine down, lighting the road beneath the fog because fog hovers close to the earth. To prevent the light from shining into the fog and reflecting off of it, the top of the beam is abruptly cut off.
How does the emblem for a fog light look?
A green light with a wavy line running through it that represents front fog lights is illuminating to the left. The rear fog light emblem, on the other hand, shows an amber light pointing right with the identical wavy line running through the beam. Some believe it resembles a sideways jellyfish.