Taping the area around the insignia on the hood to safeguard the paint while removing it is optional. Using a cloth under the pry tool to prevent scratches is another option for protection. To make the removal process simpler, choosing the appropriate pry tool is essential. To fit beneath the symbol, the tip must be extremely thin. To prevent scratching your paint, we advise sealing the tip of a thin flat head screwdriver with masking tape. For further information, see the images below.
Pry up the old insignia first, then work your way around it until it begins to lift up evenly. Simply grip and pull after it has been raised high enough for you to pick it up with your fingers.
Two mounting tabs on the underside fit into plastic grommets on the underside. Along with the symbol, these two grommets should be replaced. The grommets will become loose as a result of drying out and cracking. While driving, a loose hood emblem could cause the emblem to fly off.
Use needle tip pliers to pry out the plastic grommets to remove them. Now that the hood emblem and both grommets have been removed, the hood may be cleaned. It’s possible that the old symbol had salt, sand, or dirt trapped underneath it from normal driving conditions.
After cleaning the hood, start placing the new grommets into position. Align the tabs of the new BMW hood emblem with the grommets now. The margins of the emblem should fit snugly with no gaps between them and the hood. The installation is now finished.
In This Article...
Replacement for the conventional roundel:
Around the 3 and 9 o’clock positions on the rear of typical roundels, there are two dowel pegs. Painter’s tape all around the badge will shield the trunk. If you have a plastic shipping strap handy, pass it through the roundel’s bottom and out the top.
With the strap, you ought to be able to remove the insignia from the trunk. Without it, pry on the top and bottom of the badge with a credit card or flathead screwdriver to remove it from the trunk.
The roundel will be removed, but the plastic grommets that held it in place will stay in the trunk. You can pry these out with a pick. If it doesn’t work, wrap some tape around the grommets before removing them with a pair of needle-nose pliers.
After removing the old grommets, press in the new ones before pressing the new roundel. It will take some force to press the emblem into the new grommets because they will be small.
Authored by:
owner of a 1973 Porsche 914 and a 1998 Impreza 2.5RS with a flat-six engine swap. only when opposing perspectives are horizontal.
How to Replace the BMW Hood Decals
The roundel emblems on the hood and trunk of a BMW are one of its distinguishing characteristics. When you initially buy a new car, these decorations are attractive. However, with continued exposure to the sun’s UV rays, they may eventually deteriorate, possibly cracking and fading. A replacement emblem can be purchased for $5 to $35 on eBay and other internet retailers, making it more inexpensive than many other auto components. Once you have a fresh symbol in your possession, you may swap out the old one for the new one in a matter of 10 to 15 minutes.
Even though an 82mm ornament diameter is the norm, BMWs DON’T always have the same size ornament. To confirm the part you require, you can use a tool like RealOEM. Take off the current emblem and check the rear for the OEM part number as a last resort if you can’t figure out what part you need. In this manner, you will be aware of what you require whether you buy an OEM or aftermarket part.
Both the emblem and two mounting grommets must be purchased. You are prepared to start this BMW repair once you have the necessary parts and tools.
Tools:
- Sharp-nosed pliers
- tape masking
- razor-sharp flat-head screwdriver
- a plastic pry bar
Step 1: Tape the area around the BMW symbol to protect the paint as you remove it from the vehicle. Placing a towel beneath the pry tool while you work will also prevent scratches on your car. Make sure to use a pry tool that is as thin as possible because it will have a significant impact on how easy the replacement process is. Masking tape must also be applied on a flat-head screwdriver if you choose to use one to prevent scratching the paint.
Step 2: Use the prying tool to start removing the ornament that is currently attached to your car once you have all of your tools nearby and everything is secure. As you loosen the symbol, move it around so that it remains comparatively flat. Once you’ve mostly freed it, you can use your fingers to complete the removal.
3. Mount the ornament by inserting the tabs on the back of it into grommets. When replacing the emblem, it is a good idea to go ahead and install new grommets. The plastic grommets, which naturally begin to wear and split with time, endanger the stability of the ornament and may even cause it to come loose from the car while you are driving.
Step 4: Remove your BMW’s grommets using your needle nose pliers. The grommets and decoration should have been taken off by this stage. Cleaning is best done now because it’s likely that over time, dirt or other debris have gotten caught under the emblem.
Step 5: Now that everything has been put away, you can simply press your replacement grommets into place. Align the symbol so that you may attach the grommets with its tabs. Make sure there is no space between the hood and the decoration at all.
Emblems
Over time, BMW emblems can fade, crack, or even just break off, giving your BMW or its wheels the appearance of being older than they actually are. Fortunately, these may be easily replaced, and a quick swap for new BMW roundel emblems and M badges will help your BMW seem brand-new. To filter these goods for your BMW, use the SEARCH BY MODEL tool on our website.
How much does a new BMW emblem cost?
BMW’s Most Popular Emblems Typically, a BMW emblem costs between $8.99 and $51.97. Before placing an order, check the center cap’s diameter as deviations could exist.
The BMW insignia on the steering wheel can it be changed?
On a 135i, the chrome parts are corroding from the inside, which is why you want to remove the roundel from the center of the steering wheel. Can you remove it without much effort?
According to BMW, no. Making a warranty claim would enable me to ask for a replacement airbag. Information on Bimmerfest can be found here and here.
I forgot to note that the roundel isn’t sold separately. Use one of the overlay roundels if you are unable to obtain a warranty replacement.
My initial hunch would be eBay. They might be the carbon fiber overlays, though perhaps someone in the commercial section has them. It’s just stickers, really.
I purchased mine on eBay, but it is not an overlay sticker like the ones I have on my hood and trunk; rather, it is a carbon fiber roundel with 3M tape attached to the back. In essence, you simply remove the 3M backing and adhere the new roundel on top of the stock one. In my opinion, it looks extremely fantastic.
I apologize for the delay.
This is the actual CF Roundel that covers the OEM roundel on the steering wheel; I apologize for the enormous size. It’s a little dusty from fingerprints and other things, though. Since true roundels aren’t really currently available for the E88/82 trunk, my overlays in CF black are only on my hood and trunk.
went in for an oil change and annual maintenance inspection. I informed my SA about the airbag roundel, and they quickly switched out the old part for a new one.
I mentioned the cracked roundel on the driver-side airbag and the depression on the passenger airbag when I drove my car in for service today. My car’s oil was changed by the dealer, but he declined to remedy the roundel and indentation problems since they weren’t serious enough to warrant the expense.
YES!!! My experience was exactly the same. I peeled off the old rondel after purchasing one off eBay for $5 with 3M on the back. The new one is the ideal fit!
You think it can be done on a 2000 Z3 2.3, I’m going to toss it out there.
Because everything I’ve read says DON’T do it! that these automobiles’ airbags will detonate. I already have the roundel in my possession, but I really want to try to remove the old one and replace it with the new one I just bought. I’d be grateful for any assistance.
BMW logos are made of metal.
Product Information THIS is the symbol that your vintage, old BMW needs! The normal BMW roundel logo is available in this all-metal variation, which is more true to the original hood roundel found on 2002, E21, E23, E24, E28, and E30 cars. The face of this all-metal base has been painted and polished.
How can I get a new automobile badge?
It’s time to prepare the region for a new symbol now that the emblem and adhesive have been removed.
The most technical aspect of the entire process is placing the vehicle emblem, but with the correct equipment, it’s not difficult. Here’s how to attach a car emblem on your vehicle.
Take a flexible ruler and measure the area where you want to place your emblem first. Start near the trunk’s edge or another prominent part of the body.
Sometimes people just eyeball it, but this might result in slightly “off” insignia, which isn’t very appealing. You will be rewarded for your accuracy if you measure for accurate placement.
Mark the location using masking tape or a dry-erase marker once you have found it. You can use these guidelines to hold the emblem in place while the adhesive dries.
Do BMW emblems vary in size?
The quick response is a resounding “no.” BMW has its moments despite being a “no-nonsense German brand.” For instance, you’d assume they’d make the BMW insignia uniformly sized. That’s not the case, though.
BMW emblems are not only not all the same size on one model, but they are also not all the same size on different models. As a result, the steering wheel emblem and wheel badges are even smaller than the trunk badge, which is smaller than the hood badge.
There’s a good probability that nobody knows why each automobile has a BMW insignia in one of four different sizes. We’ll have to put it down to one of those peculiarities.
To give you a fair warning if you decide to order new badges for your automobile, we are bringing this up. The best course of action is to search for BMW model-specific insignia. After our little DIY tutorial, we’ll chat more about that.
What does the BMW badge mean?
White and blue, the colors of the German State of Bavaria, where BMW is based, are the first clue to the logo’s meaning. The BMW logo, complete with the four colored quadrants, is shown on a spinning airplane propeller in a 1929 BMW advertisement.