Could you please explain how to turn off the airbag light on my BMW X5? Every time I turn on my car, it has been coming on, and I have no idea how to turn it off. I’m hopeful that resetting the light will solve the problem.
In less than two minutes, find out if your auto insurance is being overcharged.
Unquestionably, resetting your airbag light is a solid first move. Observe these steps to reset the airbag light on your BMW X5:
- Upon starting your automobile, check to see if the airbag light is on.
- Then, after seven seconds, restart your vehicle.
- Two more times, repeat this procedure. Your airbag light ought to disappear.
It is advisable to have someone check over your car for you if the airbag light starts to illuminate once more. Given that sensors are frequently the subject of auto recalls, there may be an issue with the sensor or the airbag itself. The airbag will protect you and any passengers in the event of an accident.
The Jerry app makes sure you are prepared for the aftermath while airbag maintenance makes sure you are prepared for an accident.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
In This Article...
Step 2: Use an OBD2 scanner to read the issue codes
Working with your airbag system is essential, therefore always use an OBD2 scanner to read the fault codes to determine where to begin troubleshooting. Never resolve the issue brought on by the airbag light before clearing the trouble codes. Continue the diagnostic by reading the codes to learn what might be the issue’s cause.
Procedure
- Under the dash, you may find the OBD-2 port. Scanners can be connected to OBD2 ports. A 20 pin OBD2 adaptor is required if your BMW was manufactured in 2001 or earlier.
- Start the engine. Avoid starting the car.
- Scanner will start up. On the scanner, choose your BMW chassis/model. We are using a Foxwell NT510 from the BMW scanner in this instance.
- Choose BMW – Body – Safety System control units. You may read Airbag Fault Codes by navigating to the Safety System/SRS control unit.
- Clear the airbag control unit’s codes. revisit the first menu. To access Clear Fault Codes, scroll below. On the following screen, click YES.
Why is my BMW’s airbag light on?
What it appears to be: A passenger seated in a chair with a seatbelt fastened holding a circle in their lap. The “SRS” symbol is illuminated in the dash of some cars.
What it means is When a problem is identified by your BMW’s computers within the airbag control unit, the airbag system, or supplemental restraint system (SRS) light will illuminate. If the SRS warning light is on, the system has been turned off, and the airbags won’t inflate in the case of a collision.
What to do if it comes on: When a car starts up, this light will briefly illuminate in the dash before going off, signaling that everything is working as it should and making it safe to drive.
Check to see if anything is obstructing the seatbelt click switch or if anything is piled up behind the seat, which could harm the wires, if the SRS light remains illuminated after starting the car or while it is in motion. If nothing is discovered, visit a local independent BMW repair facility as soon as possible to have a professional inspect and identify the issue. This is not something to be taken lightly, and it is safer to get this issue looked at by a certified BMW mechanic than to jeopardize your safety and the safety of your passengers by driving while it is still active.
How to turn the light off: After you bring your BMW to your neighborhood BMW shop, your mechanic will examine the component and the wiring, run code checks, and perform any necessary repairs.
An illuminated SRS light may indicate a sensor issue, the need to reset your airbags (for instance, if you were recently in a collision and the sensors were activated but the airbags did not deploy), or an issue with the seatbelts. Checking car bulletins is a good idea because there may be other instances when your airbags need to be recalled.
How do I activate my airbag light?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles. When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
What is the duration of a BMW airbag replacement?
This repair might take around two hours, but it might take longer depending on when your BMW store can do it.
Why won’t my airbag light activate?
The backup battery is dead. It is the most frequent cause of an airbag light that won’t go off. It might take place if your car’s battery is running low or has been depleted for any other cause. Once the battery is fully recharged, the issue will be resolved. But the battery might still be in place.
What is the price of a BMW airbag?
Best in Automotive Repair Replacement air bag control modules for the BMW 328i typically cost between $996 and $1,067. While parts are priced at $724, labor expenses are predicted to range between $272 and $343. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
What could turn on the airbag light?
defective clock spring The clock spring in your car keeps the airbag, horn, and electrical system connected while allowing the steering wheel to turn. Clock springs that are broken or worn out are more typical in older vehicles and will turn on the air bag warning light.
Is the BMW airbag being recalled?
The newest update in the ongoing Takata airbag recall disaster comes from BMW, which has issued a new recall for almost 4,500 variations of its 3 Series sedan and wagon for model years 1999-2001. This recall follows one from November 2019. This time, albeit the affected vehicles had undergone an inspection, the problematic inflators had not been changed.
The original flaw included a Takata manufacturing problem that led to leaky seals in driver-side airbag inflators made without azide. As a result, the inflator propellant might have been damaged by moisture and could either inflate too forcefully, sending shrapnel into the cabin, or too slowly, failing to protect the driver in an accident. The non-azide inflators use a different explosive chemistry that also allows for the chance of underinflation, but the first risk is comparable to that of the original Takata recall of its inflators utilizing ammonium nitrate propellant.
The 3 Series variations listed here are among the 116,000+ vehicles recalled in late 2019: the model years 2000–01 323Ci, 325Ci, 328Ci, and 330Ci; 1999–2001 323i, 328I, 330I, and 330Xi; and model years 2000 323i and 328I wagon.
Dealers will provide a free replacement inflator that has a redesigned design. Owner notification letters are anticipated to be mailed out starting on July 19, but anyone with more inquiries should contact BMW at 800-525-7417 or the vehicle safety hotline of the National Highway Traffic Safety Administration at 888-327-4236. In order to check their vehicle identification number and learn more, they can go go to the NHTSA website.
Will an airbag light automatically go out?
Never simply reset the airbag light without fixing the issue. When a collision occurs, this may cause the airbags to deploy or not work at all. If you are unsure of how to repair the airbag’s parts, let a pro handle it. Always remember to disconnect the battery connection before servicing an airbag. After fixing the issue, the airbag light frequently goes away by itself, although not in all car types.
What is the cost of turning the airbag light back on?
Reset Airbag Light, at No. 1 Although it typically costs a few hundred dollars and takes several hours, depending on the type of automobile it might cost as much as $600.
Is a reset of the airbag light necessary?
The airbag warning light could come on as a result of a sensor malfunction or accidental travel. It will be necessary to reset the system and examine the sensors. The purpose of the airbag clock spring is to preserve continuity between the vehicle’s electrical wiring and the driver-side airbag.
The severity of an airbag light
When this light illuminates, a system issue has been found, and one or more airbags may not deploy in the event of a collision. Even while it’s feasible for all airbags to function as intended even with an SRS warning light, an airbag malfunction is a serious safety risk.
Can I operate a vehicle with the airbag light on?
No, driving while the airbag light is on is not safe. When the airbag light comes on, the vehicle’s airbag system is malfunctioning. Due to this flaw, the airbag is unlikely to deploy after an accident. Therefore, it is not advised that you use the vehicle until the system has been fixed.
Never disregard the important caution. There’s no need to gamble with the car, even though it doesn’t make it unsafe to drive.
The light does, however, show that the SRS parts are not functioning properly. This may potentially indicate that the airbags won’t activate in the event of a collision. You shouldn’t wait until you are involved in an accident to determine whether the airbags will keep you safe.
Is there a severe issue with the airbag light?
In the case of a collision, the airbag will not be able to deploy if the airbag light is on. This is a risky situation, therefore you should try to avoid operating that car as much as you can.