Your keyless entry remote has a button cell battery inside. If the key is in the keyless entry remote, remove it from the way.
Try very carefully to disassemble your key using your hands or a flathead screwdriver. With a flat head screwdriver, swap out one CR2032 battery.
Replace the outdated CR2032 battery. Every battery has a negative and a positive side, and if you connect the wrong way, your circuit board won’t be able to conduct current and function. Check the battery’s position by the “+” mark.
Check the keyless entry remote after installing the new battery by pressing buttons. Reverse the assembly of your fob’s shell if every function works.
Restoring your cover to the fob is the last step. From top to bottom, delicately try to put the parts in position. Check the shell of your key fob for gaps. Try repeating the previous procedure if it is not completely closed.
In This Article...
Changing the Battery in Your Hyundai Key Fob
The battery in your Hyundai key fob is simple to change. A replacement CR 2032 3V battery is all that is required. They typically cost between $3 and $5 for a pack of 5. Wearing latex gloves is advised because you will be contacting a motherboard during this process, which could result in unintended harm.
- Remove the emergency key from the fob’s base.
- Between the release button and the key slot, insert the key.
- Turn the key until the fob pops open as if you were unlocking a door.
- Open the fob while facing the buttons downward (otherwise they will fall out).
- Remove the barrier and motherboard, then set aside the button-side of the fob.
- Remove the dead battery from its mount using the key.
- Place the + side of the new battery in its bracket.
- Replace the fob’s button-half, motherboard, and barrier.
- Set the release button peg in the appropriate hole.
- Reassemble the fob with a snap.
You’re done now! Press any button to put your Hyundai Smart Key to the test. If all was done correctly, a tiny red light should flash over the unlock button.
What type of battery does a key fob for a 2017 Hyundai Tucson take?
A CR2032 battery powers the majority of Hyundai key fobs. Once you have a new Hyundai key fob replacement battery in your possession, insert it into your key fob exactly where the old one was. Check to see if the battery is in contact with each connection.
I can’t get my Hyundai key fob to open.
By pressing and holding the metal tab or button, start by withdrawing the metal key. Next, insert the metal key into the little opening and turn it in either way to release the back cover of your key fob. The case ought to instantly open.
Why won’t my key fob function when I change the battery?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
If I change the battery, do I need to reprogram my key fob?
After changing the battery, you typically do not need to reconfigure the key fob. However, you might need to reprogramme it by re-pairing it with your vehicle if you’ve replaced not only the batteries but also some of the internal cabling and electronics.
Where is the Hyundai Tucson’s smart key holder?
This information caught my attention. I think it would also benefit our Palisades!
Fix 1: While tapping the brake, push the Start button using the rear or end of the dead key fob. Fix 2: Place the dead key fob, buttons facing up, in the Smart Key slot (located in the locations specified below), and depress the brake while pressing the Start button.
Slots for Smart Keys: There are three places where these slots can be found: 1. on the front of the center console; 2. behind a panel right below the infotainment control knob; or 3. on the left side of the glovebox when it is open.
How is my car key fob reset?
- Take hold of all of your car’s remote starters.
- Place your ignition key in and select Accessory (or press the start button once without pushing the brake pedal).
- Your remote car starter’s Lock button should be pressed.
- After turning it on for five seconds, turn the key back to the “off” position (or press the start button again).
- The on-off cycle should be repeated a total of four times.
- You’ll hear a sound (a “ding,” “ping,” or “buzz”) on cycle number four when you choose the Accessory position. Right now, programming mode is active.
- Lock the remote by holding down the button (s).
- Turn off the car in ten seconds.
- Shut the door, exit the vehicle, and then try the remote.
- If so, that’s excellent!
- It’s time to call the dealership if it doesn’t.
What occurs when the battery in your key fob runs low?
The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. When a smart key fob is in your pocket or handbag for automobiles with push-button starts, the car might not always detect it if the battery is low.
How much does a new Hyundai key fob cost?
It’s more likely that you will be allowed to utilize an aftermarket key fob if your automobile is at least ten years old, according to CR’s Ibbotson. Many of these less sophisticated fobs can be configured by the consumer, a local technician, or an automotive locksmith.
Ibbotson advises making sure to phone your neighborhood garage first to confirm that they can do the task, as key-fob programming equipment levels can vary from shop to shop. For instance, a Maryland-based repair shop called Murray’s Auto Clinics informed CR that they are unable to program key fobs for any vehicle with push-button start or keyless entry.
We took our vehicle to M.J. Sullivan Hyundai in New London, Connecticut, where we were charged $120 for programming (one hour of labor), which is what they would have charged us if we had purchased the key fob from them.
Hyundai sent us a laser-cut mechanical backup key for $72.47, bringing the total cost to $272.42 (the car waited at the shop for two days); if we had ordered the key fob through the store, the total would have been $428.92).
For some makes and models, you can purchase a cheap aftermarket fob and program it yourself if your home unexpectedly gains a third driver, such as a teenager.
We purchased a fob from BestKeys from Amazon for CR’s 2008 Chrysler Town & Country minivan. Although it lacks the Chrysler branding on the back, it resembles the two original fobs that came with the minivan when it was new. The uncut mechanical key and internal circuitry were both included in the $14.30 price. (However, we didn’t see the need to shell out the cash to have a locksmith cut that third key.)
Chrysler customers can program a third key fob themselves if they already have two functional ones, just like GM owners can. The owner’s manual contains clear and straightforward programming instructions.
How often should the battery in my key fob be changed?
Car key fobs are so practical that it’s simple to ignore them. But did you realize that regular maintenance is required for your key fob? Batteries for key fobs should be changed every three to four years, though this will depend on how frequently they are used and how well they are made.
You’d wish you had taken better care of your key fob if it were to abruptly cease working while you were far from home. Avoid being stranded and having to pay for a tow because your key fob isn’t working properly. Here are some red flags that could indicate that it’s time to replace your key fob batteries before it’s too late.
Hyundai vehicles can be operated without a key fob.
Once the engine is going, the automobile will still work without the key fob. Additionally, switching from park to drive is trouble-free even when the key is not available.
My car’s key fob won’t sync.
Press and hold the “LOCK” and “UNLOCK” buttons on the key fob simultaneously until the locks cycle one more to program your keyless-entry remote.
Reversing step 6 by closing the door before entering the key may help if the above method doesn’t work because some Toyotas have a different approach.
Why doesn’t my automobile recognize my key fob?
Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.
How long do the batteries in key fobs last?
Keyless entry is a fantastic feature, but you can only benefit from it if you keep the technology up to date.
The little things in life can often mean the most, such as not having to search through your purse for your keys or using your key fob to raise and unlock the back doors so you can load groceries.
But what occurs if the fob breaks down? The key fobs for your car require maintenance just like the vehicle itself does.
When anything breaks down, Gary Freeman, owner of C & G Auto in Myrtle Beach, advised against replacing it right away.
“A replacement fob can be pricey; they can cost several hundred dollars, and once you have a replacement fob, they need to be programmed,” said Freeman.
He advises checking the battery as your first action. If you have to press the lock or unlock button on the remote numerous times before it locks or unlocks, it could be a sign that the battery is starting to lose power, according to Freeman.
According to his calculations, the keyless entry remote can be safely stored or hung up anywhere beyond the six to ten feet from which the automobile computer system can read the fob.
According to Freeman, the battery life for the majority of automotive key fobs is three to four years with regular use. Additionally, he claims that the battery life of your fob may be impacted by where you keep it. Freeman advises against hanging the fob near the car or leaving it in the car overnight.
“It (the key fob) does send a signal continuously, so it drains the battery in the key fob and its causing an excessive drainage on the battery of the automobile,” noted Freeman. “A computer is identifying that signal saying I’m ready to start.”
According to Freeman, if the key fob malfunctions, the automobile frequently won’t start because the computer system won’t acknowledge that the key fob is present in the vehicle.
“In most situations, the owners’ manual will clear that up for you, or practically any auto repair facility can replace that battery,” Freeman continued.