Take the BMW key fob you want to configure, hold down the unlock button, and then press and hold the BMW logo three times. The doors should lock and unlock once more. When this occurs, you are ready to go! Your BMW key fob has been programmed by you.
In This Article...
How is a BMW programmed?
Turn the ignition of the automobile five times fast to position 1 and back. Remove the ignition key from the car. Press the BMW logo three times while holding down the unlock button, and then let go of the button. Within 30 seconds of the initial key programming, repeat step 3 if you want to program any additional keys.
How is a 2014 BMW key fob programmed?
Press the lock button (the BMW logo) three times while simultaneously holding down the unlock button, and then let go of the unlock button. Repeat step three with the extra key(s) within 30 seconds of programming the first key if you want to program more than one BMW key fob at the same time.
How is a 2011 BMW key fob programmed?
3. After removing the ignition key, press and hold the unlock button for 15 seconds. Then, within a 5-second interval, press the key lock button three times.
4. Let go of the buttons.
5. Doors will lock and unlock to demonstrate that proper programming has taken place.
Approach 2:
One key that is already programmed and one key that needs to be programmed are required for this procedure.
1) Enter and lock every door.
2) Start the ignition and swiftly turn it off. Start the process now (no more than 5 seconds). 30 seconds must pass before the next action is taken.
3. Take out the first key.
4) To put the key closer to the antenna on the remote receiver, hold it up towards your left shoulder.
5) Press the lock button three times while keeping the unlock button depressed. As soon as the unlock button is released, the doors lock to authenticate the procedure.
6) Quickly carry out steps 4 and 5 for key #2 and so forth.
If that doesn’t work, try pressing the keys in reverse. vs. 1 then 2, key 2 then key 1
Approach 3:
1. Quickly turn the key to position 1 five times. 2. Take out the key. 3. Hold the unlock button while pressing the lock button three times.
4. Within 30 seconds, press the same button if you have another key. 5. To complete, turn on the ignition.
PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip used by the immobilizer (which prevents the automobile from starting) cannot be programmed; this must be done by a professional.
PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip used by the immobilizer (which prevents the automobile from starting) cannot be programmed; this must be done by a professional. You must use diagnostic tools to have your remote configured to your vehicle at your neighborhood dealer or locksmith.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Was this Knowledgeable? Please consider making a gift of any kind to support this blog! Your contributions aid in the upkeep of this website. We appreciate your visit and donation.
How is a 2009 BMW key fob programmed?
- Quickly turn the key to position 1 five times.
- Key removed.
- Press the lock button three times while holding the unlock button in place.
- Within 30 seconds, press the same button if you have another key. 5. Start the engine to complete.
Do BMW keys require programming?
Key fobs that have been activated as detailed above can only open your car manually and cannot be used with the Comfort Access feature in E Series BMWs and MINIs.
It is important to code your car to erase the old key profile and set the new key for Comfort Access use in order to activate your new key fob for use with Comfort Access. This can be done at your neighborhood BMW/MINI dealership or we can remotely code it for you.
Our touchscreen key fobs for BMWs from the G Series don’t need to be programmed to function with your particular BMW.
How can my BMW x5 key fob be reprogrammed?
How to Set Up a New BMW Key Fob Take out the key. Press the BMW logo three times while holding down the unlock button, and then let go. Within 30 seconds after the initial key programming, repeat step three if you still have more keys you’d like to program. To finish the procedure, start the engine.
How is the BMW key reset?
- Utilize your metal key to unlock your BMW.
- Place the ignition key in the lock.
- A key is turned to the on position.
- Put it in the off position right away.
- Remove the key from the ignition right away.
- Next, hold down the key’s unlock button for a few seconds.
- Finally, three times press the lock button on the key.
How can I sync my BMW key fob again?
Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
Why won’t my BMW key b function?
You’ll need a CR2032 battery if your key fob is functioning well but your BMW key fob battery has to be changed. Make sure you’re using the appropriate size of these tiny cells, sometimes referred to as “watch batteries.”
How does one set up a fresh key fob?
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position.
This notifies the electronic control modules in your automobile that the signal is coming from your key in the ignition, and it then saves the information.
Do you need to reprogramme your BMW key fob after a battery change?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reconfigure the fob if changing the batteries has reset this connection or if it was somehow disrupted in order to get it to detect your car once more.
Can I set up a key fob on my own?
Yes, a replacement automobile key can be obtained without the original. Since people frequently misplace their car keys, replacing a misplaced car key is an easy operation. Nevertheless, depending on the key type, it could be pricey.
A key fob is a little electronic gadget that you can use to remotely lock and unlock your car. Other capabilities of the fob could include a remote engine starter, a trunk opening, or a proximity system that allows you to open your car without taking the fob out of your pocket.
Depending on how sophisticated the key technology is, replacing car keys can be expensive. An old metal key can be duplicated for less than $10 at a hardware store. On the other hand, the most recent smart keys must be ordered from a dealer and might cost between $200 and $500.
Your car key’s battery can be changed easily by opening it up, identifying the battery type, and going to the store. If you’re unsure of how to open the remote, it pays to consult your owner’s manual because you don’t want to force anything open and break it.
Today’s automobile keys are more secure and capable thanks to technology, but the gain isn’t free. The majority of modern keys feature complex electronic parts that must be configured before usage.
You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.
You might be able to program a replacement yourself, depending on the make and type of your vehicle. The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The catch is that in order to complete the process quickly or at all, you might need two functional key fobs.
It’s wise to acquire and program a backup remote before you require it. Additionally, a lot of used-car buyers (particularly auto dealers) will pay more for a vehicle with at least two functional key fobs or sets of keys.
A misplaced automobile key can indeed be replaced by a locksmith. If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.
How is a key fob programmed at a dealership?
You will need to contact an automobile locksmith (or dealer) to help you if you are unable to self-program your keys (either because there isn’t a process for doing so, you don’t have the necessary number of functioning keys, the tools/computer/software needed is too expensive, or all of the above).
In order for auto tool makers to create software and hardware that enables them to program their vehicle keys, the majority of US and Asian auto manufacturers share their programming protocols with them.
In order to provide programming as a service to their clients, the locksmith then obtains this equipment.
An automobile locksmith will insert a computer with the necessary software into your OBD port below in order to program a car key, remote, or FOB (commonly found below your dashboard).
Many different businesses provide computers and software for programming. They frequently offer support for many car makes and models.
No system can program all the makes and models, thus a locksmith who wishes to repair car keys may have to make a significant investment in these equipment.
The locksmith will be able to add and remove keys from the car using the programming software. Because of the following, this is helpful:
- Some vehicles, like Fords, only let a certain number of keys into the vehicle’s computer system. Ford vehicles can only have a maximum of four keys. In order to make room for your new key to be programmed, a locksmith might utilize a computer to delete keys that are no longer in use.
- It is possible to remove keys from the vehicle after they have been lost or stolen so that they can no longer be used to unlock the doors or start the vehicle (for FOBs/Smart Keys).
However, a locksmith cannot program keys on these computers nonstop. Most often, a “token” system is in place that restricts the computers’ ability to program the car to times when a pre-paid token is available for use.
Tokens are required for programming, and one token is required for each try, according to your neighborhood locksmith. As a result, the locksmith has to pay for each attempt at programming a car key. The programming cost the locksmith charges already includes this.
Depending on who is providing the code, the vehicle, and the locksmith employed, the cost to program a car key can range from $25 to $100. The price will be higher if a second code (a skim code) is required.
Adding a skim code is necessary when attempting to program some automobiles. This code is available from the vendor, but at a price. This fee, which is typically $60, is transferred to you.
By giving the dealer your title in person, you might be able to obtain this skim code on your own. They typically don’t charge the owner of the vehicle because they believe this to be information that belongs to you. Normally, you have to collect this information in person, but it could help you save some money on the price of getting a backup key.
Note: German automakers do not divulge their procedures (see article). Therefore, you will almost probably need to go to a dealer and, sure, it will cost much more if you own a Mercedes, BMW, VW, Porsche, etc.
Ask the vendor if you can purchase the key or fob elsewhere if you have one of the aforementioned items. Some of these vendors will only program keys they sell directly to customers and won’t program keys that were outsourced. However, if they DO program/cut them, you might be able to save some money on the key’s price.