The 4.7L and 4.0L engines of the 2009 Toyota Tundra feature timing belts, whereas the 5.7L and 4.7L engines have chains. Both engines are interference types. Check out the information in the table below.
In This Article...
What models of Toyota have timing chains?
- Timing belt for all Paseo models from 1992 to 1997.
- Cressida: The straight-six engine of the Toyota Cressida from 1990 to 1992 had timing belts.
- Prius: From 2001 to the most recent models, all Prius models share the same timing chain. The Prius C, Prius V, Prius Prime, and Prius Plug-in are all included in this.
- Toyota’s well-known Corolla compact vehicle has a timing belt from 1990 to 1997. Timing chains, however, were introduced in models starting in 1998. The Corolla Hybrid and Corolla iM/Scion iM models are included in this.
- Toyota Camry: The timing belt is used in all models from 1990 to 2001 as well as the V6 model from 2004 to 2006. The timing chain is utilized by the 2002–2020 4-cylinder and 2007–2020 V6 vehicles.
- All Tercel models produced between 1990 and 1998 had engines with timing chains.
- Timing chains are used in all Yaris vehicles produced from 2007 through 2020, including the Scion iA and Hatchback variants.
- All Avalon models from 1995 to 2004 feature timing belts. Timing chains are used in the vehicles from 2005 through 2020, including the 4-cylinder Avalon Hybrid.
- Timing chain for all models, 2003–2013, shown as a matrix.
- This subcompact’s timing chain-powered 4-cylinder engine was sold from 2000 to 2005.
A Tundra timing chain’s lifespan is how long?
Older cars might have a timing chain, which is comparable to a motorbike chain and has a lifespan of about 60,000 miles. For robustness and long life, more recent models use timing belts consisting of polyurethane and Kevlar. Although they can last up to 100,000 miles, it’s always a good idea to change them before that.
Should Toyota timing chains be changed?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- The engine shakes or rattles while it is idling.
- Starting the car is challenging.
- Misfiring engines and sluggishness
- The vehicle won’t start
- The check engine light is on.
- The timing chain has noise.
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.
Timing belt or chain: which is superior?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
Timing belt on Toyota 4.7 liter V8?
The 4.7L Toyota Land Cruiser engine uses a timing belt, whereas the 5.7L, 4.5L, 4.0L, and 4.2L engines have a timing chain. Every engine in a Toyota Land Cruiser interferes.
In contrast to the 2007 Toyota Land Cruiser 4.7L option, the 2021 Toyota Land Cruiser 5.7L option uses a timing chain.
Timing chains: how long do they last?
When should a timing chain be changed? Unless there is a specific issue, the timing chain typically needs to be replaced between 80,000 and 120,000 miles. In automobiles with higher mileage, chain problems are frequent.
How much does it cost to repair a timing chain?
How much does it cost to replace a timing chain? Timing chains can be changed by a professional for $1,600 to $1,800 or you can do it yourself for $600 to $800. The cost is significant because it’s challenging to replace this component.
Which motors include timing chains?
Timing chains are being installed in more and more vehicles. The majority of Mercedes and BMW vehicles come with timing chains.
A non-exhaustive list of vehicles that can have timing chains installed is provided below:
- Corvette by Chevrolet
- 159 Alfa Romeo
- Every SAAB has a turbocharged engine.
- Duster, Sandero, and Sandero Stepway from Dacia
- a lot of Mercedes
- Jazz Honda
- many BMWs
- Skyactiv-G engine in Mazda
- Every Cadillac
You may physically inspect your car’s timing belt or chain by removing a cover at the end of the engine, consulting your owner’s manual, or asking your mechanic. The timing chain is easily identified by its metal links when the cover is removed with the proper tool, whereas the belt is comprised of rubber and is considerably more flexible.
Ask your mechanic: “How do I tell whether my automobile has a timing belt or chain? if you are still unclear.
You won’t typically need to replace your car’s timing chain. Poor lubrication is likely to have ruined a chain that has to be replaced.
If the timing chain is determined to be damaged, it’s critical that you hire a reputable expert to handle the repair. In extreme cases, the mechanic will even need to completely remove the engine to get to the timing chain. If the timing chain breaks, it may harm other engine components like the valves, making the repair more involved and pricey.
How can timing chain failure be avoided?
- Check your timing chain cover for leaks frequently.
- Make that the engine oil is not running low.
- Avoid letting the engine get too hot; if it does, don’t drive.
Can I drive on a bad timing chain?
The timing chain expands over time, as was already mentioned. Even though you can still drive with an old timing chain, we advise replacing it as soon as you observe stretch or other signs of failure.
A faulty chain can jump many teeth or entirely break if you drive on it for an extended period of time and it continues to strain, which can seriously harm your engine’s internal components.
How can you tell when your timing chain is failing?
The engine stalls out. An engine misfire might result from a stretched timing chain that has lost its integrity, skipping a gear and losing the required coordination. Misfires that occur frequently may be a sign of a timing chain problem and should be looked into.
What occurs if a timing chain malfunctions while you’re driving?
An engine with a broken timing chain will either not start or fail while being driven. The engine won’t start if the belt is already broken since there won’t be adequate compression. The pistons will sustain damage by coming into touch with the valves if it breaks or leaps while being driven. The actual valves will bend, possibly ruining the engine.
Is timing belt more affordable than timing chain?
Vehicle timing belts were created about 50 years ago. It served as an alternative to the existing timing chains. A timing belt has the advantage of being highly robust and operating more silently.
Their cost is an added bonus. Timing belts are substantially less expensive to replace than timing chains due to their structure and substance. The cost of labor to replace a timing belt is more than the cost of the parts. The cost to repair a timing belt can range from $300 to $1,000 and typically includes replacing the water pump as well. Timing belt replacement is not a DIY project.
Similar to a timing chain, a timing belt has the potential to seriously harm an engine. You must therefore adhere to the manufacturer’s advised timing belt changing period. This will often fall between 60,000 and 100,000 kilometers. Their lifespan is roughly half that of a timing chain.
How is a timing chain maintained?
Timing chain vibration is prevented by using chain guides and silencers. Each of these parts ages as well. How can you tell if the timing chain needs replacing?
When the timing chain is worn, the engine frequently feels sluggish, has little power, or is difficult to start. Perhaps the Check Engine light will also come on. This is due to the fact that as the chain ages, it stretches and the ignition and valve timing advance more.
Numerous noises coming from the engine’s timing chain cover area can also be caused by a worn timing chain, chain guides, or chain tensioner. The timing chain noises can be whirring, whining, buzzing, whining, or rattling.
If the timing chain needs to be replaced due to wear, a new tensioner, guides, and other chain drive mechanism components are often included with the kit. The motors of many cars have two or even three chains, and frequently your auto repair shop will advise replacing all the chains at once.
Depending on the vehicle model, timing chain replacement costs might range from $370 to $1,500.
Finding the right process to set the timing when a new chain is inserted is necessary if you intend to replace the timing chain yourself. This kind of information can be found in the service handbook for your car.
It’s rather simple to replace the timing chain in old-style pushrod engines. If you drive a new front-wheel drive vehicle with a transversely positioned engine, you may not have such luck because the engine compartment may be relatively small. In a V6 engine, it becomes considerably more challenging.
Maintaining your engine properly and changing the engine oil at specified intervals will help you avoid timing chain issues. Oil filters and engine oils of the highest caliber should be used. The timing chain will always be lubricated if the oil level is maintained at the right level. Given that many modern engines are known to use oil, this is extremely crucial. A timing chain in a well-maintained engine can last up to 300,000 miles or even more.
How much does a Toyota Tundra timing belt replacement cost?
Timing belt replacement price range for the Toyota Tundra. Timing belt replacement for a Toyota Tundra typically costs between $726 and $1,064. While parts range in price from $342 to $580, labor costs are predicted to be between $384 and $484.