- Turn the parking light socket a little counterclockwise, then pull to remove it.
- Pull the parking light bulb out to remove it.
- Get the new parking lamp ready.
- Push the replacement parking bulb into the socket.
- Push the parking light socket into the tail light assembly while lining up the tabs, and then turn it counterclockwise to secure it.
- Turn the socket a little clockwise, then pull it out to remove the brake light and tail combo socket. Please take note that this bulb contains two filaments, one for the brake light and one for the tail light.
- Press the combination bulb into the socket, turn it, and then take it out to remove it.
- The new combo bulb should be ready.
- By inserting it into the socket and turning a little, insert the new combo bulb.
- Insert the combination socket and crank the tail light assembly to secure it. Make sure the mark is parallel to the assembly’s bottom.
- Turn and pull the turn signal light socket to remove it.
- Turn the turn signal bulb a little before pulling it out.
- Set up the replacement turn signal bulb.
- Align the tabs on the new turn signal bulb before placing it into the socket and turning it on.
- Push the turn signal socket into the tail light assembly, align the three tabs, and turn it just a little to secure it.
In This Article...
What does the Hyundai Sonata’s brake light signify?
The brake warning light is a major matter. When you see it turn on, ensure sure your emergency brake is not engaged, then halt your vehicle as soon as you can. Your brakes could not operate at all if you have insufficient brake fluid.
Why do my Hyundai Sonata’s brake lights not function?
The mechanic will bring a multimeter while inspecting the electric parts of your car, particularly the fuses and relays, to help them identify which particular part has failed. The mechanic will start by looking at the rear of the vehicle for any obvious damage, such as frayed or loose wiring and damaged tail light covers. The mechanic will next start to look at each component along the electrical circuit if there isn’t any obvious damage.
By checking at the fuses, the mechanic will start examining the various electrical parts of the car. He or she will take out the appropriate fuse for the tail lights to check if it is blown if they suspect a blown fuse. In such case, the mechanic will swap it out for a fuse that is properly rated for the amperage.
The mechanic should determine whether the unlit bulb is burned out if only one of the tail lights appears to be out. Bulb failure and replacement are inevitable over time. The mechanic will examine the unlit bulb’s filament to see if it is broken. In that case, a new bulb will be installed in lieu of the damaged one.
The mechanic will then examine the matching relay for the tail lights if it appears that the bulbs and fuses are in good operating order. The mechanic can measure the relay’s resistance using a multimeter. The mechanic will replace it and rewire it to the current connections if it is not operating properly.
The brake light switch should be checked by the mechanic if the tail lights appear to be operating OK but the brake lights are not. The mechanic will replace the old switch with a new one if the brake light switch is not reacting to the brake pedal. After that, the mechanic should ensure sure the brake lights are operational and responding to the new switch.
Any time a repair is required, the technician will see to it that all required work is done and that the new components work properly. A code reader/scanner will be used by the repair to erase any error codes that may have been set off by problems with the taillights.
Why won’t the brake lights on my 2012 Hyundai Sonata turn off?
Due to a problem with the brake pedal assembly that, in certain cases, prevents the brake lights from turning off, Hyundai is recalling 304,900 Sonata cars from the 2011 and 2012 model years.
The brake pedal stopper pad, which can eventually wear down and allow the brake light switch to stay on after the driver lifts their foot from the brake pedal, is at problem. In these circumstances, the Sonata is capable of continuing to drive while the brake lights are illuminated in the “braking” position, which can give other motorists the wrong impression. Additionally, this issue can make it possible to shift out of park without depressing the brake pedal. Even while Hyundai reports that the second issue hasn’t resulted in any accidents, it is this second issue that is more concerning.
The Hyundai Sonata automobiles produced from December 11, 2009, to June 30, 2011, are subject to the recall campaign.
On January 11, Hyundai will begin the recall procedure, and dealers will apply the repair. Owners may bring their cars in to have this problem addressed at no charge; the fix simply entails installing a new stopper pad.
Owners should reach Hyundai customer service directly at 1-855-671-3059 and reference recall number 136 prior to the start of the recall. They can also visit the National Highway Traffic Safety Administration (NHTSA) website at www.safercar.gov or dial the vehicle safety hotline at 1-888-327-4236.
Ramey, Jay
For his own personal use, Jay Ramey has been drawn to the more adventurous end of the reliability spectrum because he spent his childhood around really unusual European cars.
Are the brake lights on the Hyundai Sonata being recalled?
To find out if your vehicle is impacted by the Stop Lamp Switch Recall Campaign, enter your VIN.
Hyundai has made the decision to replace the stop lamp switches on various vehicles with model years 2007–2011 as part of a voluntary safety recall in the United States. Affected vehicles include the Accent, Elantra, Genesis Coupe, Santa Fe, Sonata, Tucson, and Veracruz. Hyundai notified the NHTSA of this action on March 29, 2013.
Is the brake light bulb the same in all cars?
It’s time to install the brake light bulb you choose after making your selection. If you’re feeling confident, you can replace the brake light bulb yourself at home on many cars because it’s not particularly difficult. Any queries you may have can be answered by your auto electrician.
Here is a step-by-step instruction manual for changing your brake light bulbs. Please remember that this is simply a general overview. Since every automobile is unique, some bulbs might not be able to be changed in this manner. We strongly advise you to consult the car manual or speak with your auto electrician if you have any questions.
The bulbs in brake lights all the same?
While the brake lights only activate when the brake pedal is pushed, the tail lights turn on instantly when the driver turns on the headlights. Even though both lights are red, brake lights often have a red light that is significantly brighter.
Depending on the type of vehicle. Dual-filament bulbs are used in many automobiles to combine the brake and tail lights into one. Here, every filament is connected to a different circuit. The thicker filament, which provides a brighter light, is utilized for brake lights, while the thinner filament illuminates as a tail light. While in certain automobiles, the brake and taillights are lit by independent lightbulbs.
Let’s look at what those lights are and what they function in order to better comprehend the distinctions between the brake light and the tail light.
What distinguishes the numbers 1157 and 2357?
The 2357 bulb has a shorter life expectancy than the 1157. The high filament of the 2357 bulb is substantially shorter than that of the 1157, with the 2357 rated at 400 hours compared to 1200 hours for the 1157. The low filaments have the same life expectancy value of 5000 hours.