Put the park position on the gear shifter. Remove the key and turn off the ignition. Under the dashboard, release the hood by pulling. Position yourself in front of the Elantra and release the hood clasp. Detach the hood.
The headlamp bolts must be removed. There are three bolts that need to be taken out: two 10 mm bolts and one 12 mm bolt.
Cut the power to the wires. Pull the electrical wire plug away from the headlamp by applying pressure to it. With the headlight removed, the location of the wiring socket for the headlamp is illustrated below.
Take the headlamp assembly off the car. Pull the headlamp assembly for your Hyundai Elantra forward. Be careful, as doing so could result in damage to the front bumper.
- Reverse the steps when installing a new headlight assembly.
- The headlamp bolts should be hand tightened. The plastic clips may break if the headlamp bolts are overtightened.
In This Article...
Step 2
Detach the hood. There isn’t enough space to work on the driver’s side, so you’ll need to remove the headlamp assembly. If you can reach the bulbs on the passenger side, there’s no need to take the assembly out of the automobile. Remove the two pushpins holding the plastic separator in place in the engine compartment. The separator should be taken out of the car after removing the 10mm bolt at its top. Remove the one bolt at the bottom and the two bolts at the top of the headlamp assembly. Remove the headlamp from the frame. Locate the connector for the wire harness, loosen the clip, and pull the headlamp free.
Which headlights are on a 2013 Hyundai Elantra?
Bulbs for a 2013 Hyundai Elantra Two headlight bulbs are needed for each headlight assembly. The high-beam headlight uses an H1 bulb, while the low-beam headlight uses an H11 bulb. These are made to be direct replacements for the parts in your automobile.
Are the headlights on the 2019 Hyundai Elantra being recalled?
Several 2019 and 2020 Elantra (ADa) automobiles with halogen headlights may exhibit sporadic high beam activation. The service procedure to replace the left and right headlight assemblies and carry out aiming adjustments is provided in this advisory.
Are there daytime running lights on the 2013 Hyundai Elantra?
It’s possible that your 2013 Hyundai Elantra is the best car you’ve ever owned. Or perhaps you’re just having trouble keeping it highway-legal. Whatever the circumstance, Advance Auto Parts carries the Daytime Running Light (DRL) item you sorely require.
What is the right way to adjust headlights?
the horizontal field, as necessary. To move the headlights inward or outward, turn the screws in either a clockwise or counterclockwise direction. Just to the right of the middle tapeline, the headlight beam should land. Then, cover the modified headlight while making the opposite headlight’s vertical and horizontal adjustments.
My headlights are different in brightness; why?
Your lights are pointed at different heights. One appears to be brighter as a result of this. Although the dealer can quickly align them for you, you can probably do it yourself. Your lightbulb is pointed higher than the other.
Should headlights be aligned?
You can always see the road clearly thanks to your headlights. But they can’t function properly if you don’t calibrate them properly. Headlight alignment issues can blind other motorists and make it more difficult for you to see.
Your headlight alignment may need to be corrected if:
- Your headlights were replaced.
- Your car got involved in an accident.
- There will be more weight on you than usual.
Make sure your car’s headlights are pointed correctly before starting a nighttime trip. Using this easy procedure and tools you already own, you can alter them.
How far should your low beam headlights project?
Conclusion. Your low beam headlights should project between 46 and 61 meters or 150 to 200 feet in front of you. With a height of between 350 and 400 feet, or 106.7 to 121.9 meters, high beams should be around twice as tall. These various levels are helpful in the various applications for each type of light.
How far should high beam headlights be visible?
When it is dark enough to not be able to see enough of the road ahead to drive safely, high beam headlights should be utilized.
Even the most seasoned drivers may find nighttime low visibility frightening. Why is nighttime driving riskier? A driver’s acute vision—which includes depth perception, color identification, and peripheral vision—is responsible for 90% of their reactions, all of which are significantly impaired at night. Headlights with high beams shine at an angle, illuminating the road 350–400 feet in front of the vehicle, or nearly twice as far as low beams. (Remember that 100 feet per second is equal to 68 miles per hour. Low lights may only offer you a few seconds to react to a hazard when driving at highway speeds at night.)
You’re reading a “Beginner Driver’s Guide” post on our website. Do you need to study for an upcoming test? Take our free practice driving test without signing up!
High lights can help keep you safe but, if used improperly, they can also put other drivers in risk. Whenever there is a chance that you might blind other drivers, you are required by law in every state to lower your high beam headlights. In general, high beam headlights cannot be utilized within 500 feet of an approaching vehicle or within 200 to 300 feet of a vehicle you are following. The exact distance varies from state to state.
Do you need daytime running lights?
I frequently ponder why automatic headlights that switch on at dusk, as opposed to just daytime running lights, aren’t a required “safety” feature. Because they see light from their daytime running lights on and the dash is all lit up, they don’t realize they are entirely dark from the back. I’ve came up to a black car on a nighttime highway with no tail lights on.
Today’s vehicles frequently come equipped with automatic headlights that turn on when it gets dark or dull, however this is not a must. Even then, the automatic setting for the headlights is usually required as it is not the default.
Similarly, daytime running lights, or DRLs—those half-bright front lights that are on anytime the car is running—are not necessary for cars in the United States. Instead of illuminating the path ahead, they aim to increase the car’s visibility to other drivers. The issue is that they frequently shine bright enough to trick a distracted or intoxicated driver into believing they have their headlights on.
In 2009, General Motors lost its battle with American authorities over the requirement for DRLs on cars, in part because strong opposition to DRLs grew among the general population. Evidently, many people mistook them for turn signals, headlights, or a travesty of the American way of life. The fact that the federal government’s primary study on the usefulness of DRLs discovered a tiny and statistically insignificant decrease in crashes with DRLs didn’t assist when they decided against requiring them.
I find it strange that cars won’t all have universal automated DRLs, headlights, and wipers in this day and age when they have automatic back cameras, parking sensors, traction control, and, shortly, automatic braking. Only a few states in the United States have regulations mandating you to turn on your headlights when the weather warrants using your wipers. Review your state’s headlight legislation here.
Why are the DRLs off?
Daytime running lights (DRLs) are now standard on many Toyota vehicles to improve a driver’s level of safety while operating a vehicle and to make other road users and pedestrians aware of the vehicle’s presence. Although the automaker does not advise changing this system, some people wonder if they can switch off their daytime running lights. Some car models allow the lights to be switched off, despite the fact that the system was implemented to make drivers safer while they traveled.
Daytime running lights are a particularly created safety element that improves visibility of a driver’s vehicle at the front during daylight hours. These lights are especially useful for improving visibility for both the driver and other vehicles on the road during dawn and sunset.
A “DRL OFF” setting is available on some vehicles, and it is activated by turning the headlight control to the “off” position. The daytime running lights can be turned off on the following cars.
The system can be turned off by having a nearby Toyota dealership work on it for people without that functionality. But since doing so could also turn off whatever automatic headlight features the car has, it isn’t advised.