The Honda B12 service is essentially just a routine inspection carried out by a Honda mechanic. The cost of the parts is roughly $80, and the labor cost is about $120 per hour. An experienced Honda mechanic can complete this task in 20 minutes, or maximum 30 minutes. A dealer will bill an hourly rate.
This service includes:
- air filter replacement
- tire turning
- visual inspections of the brake pads and axle boots
- replace the cabin air filter
- visual fluid refills and checks (brake, tranny, windshield washer)
- Change the oil and oil filters.
Within 30 minutes, the owner can easily complete the first three tasks. The air filter can be easily accessible and replaced if necessary (they don’t always need to be changed), and the cabin filter is located under the glove box. Although it takes a little longer to replace the oil, it can be done in 10 minutes.
Simply inspecting the wheels from below the car constitutes the axle boot examination. Rubber axle boots are often located where the rim is. They must be changed if they are torn. You definitely need a Honda mechanic at this point!
In This Article...
How can the service light on a B12 Honda Civic be reset?
Your Honda Civic’s computer keeps track of how far you go each day and how long the engine idles. The Maintenance Minder will illuminate an alphanumeric code in the center of your instrument cluster at the prescribed maintenance intervals to show what type of routine maintenance is advised.
The reminder system is reset after the maintenance is finished to begin counting down until your next oil change.
How is a Honda B12 cleared?
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
What does the Honda Civic’s A12 code mean?
One of the vehicles with a higher reputation for dependability is the Honda Civic. As long as you perform routine maintenance, it continues to work hard for you. Sometimes, the car may alert you and let you know what maintenance it needs by giving you codes like the A12.
These maintenance codes typically appear on your dash when the car decides it needs repairs. Any code should indicate that you need to service the vehicle. The A12 code denotes the possibility of an oil change, engine air filter replacement, or tire rotation being required.
There is a lot to learn about the Honda Civic’s maintenance regulations. You can easily take better care of your car once you understand what they signify and how to fix them. Here, we’ll go over some of the requirements for doing this. Visit Vehicle History to find out more about your Honda Civic’s upkeep requirements based on the model year.
What does the Honda B1 stand for?
You might be thinking, “What is Honda B1 service? ” if the Maintenance Minder in your Honda car, SUV, or truck displays a Honda B1 service code. The number “1 indicates that a tire rotation is necessary, and the letter “B indicates that your car needs an oil change and a mechanical examination.
What is a Honda service B reset?
You must reset the Honda Maintenance Minder after taking care of your maintenance issues. Turn the ignition switch on, hold down the Select/Reset knob until the engine oil life indicator appears, and then hold it down once more for at least ten seconds. The maintenance item code and the indicator will then flicker. Press the knob again for five seconds after that. The engine oil life indicator will reset to 100% after the code disappears.
On a Honda Civic, how do you reset the dashboard?
It’s encouraging to hear that you maintain your vehicle by having it serviced. Although resetting your dashboard is a simple procedure, think about having a mechanic inspect your automobile once more. Even while the majority of automobiles need to be manually reset after repair, numerous lights flashing simultaneously could indicate a more significant problem.
Having said that, if you are certain your 2019 Honda Civic is in perfect working order, follow these instructions to reset the dashboard:
- Don’t touch the brake; instead, push the Engine Start button twice. You intend to switch into accessory mode.
- Press Home, followed by Settings, on the infotainment screen’s upper left corner.
- Press the car. Select Maintenance Info after that.
- From this point, click Select Reset Items to choose which dashboard lights you want to reset.
- Choose All Due Items if you want to start from scratch. There will be a Reset option in a pop-up window.
- When you choose, a notification informing that your maintenance information has been reset appears at the bottom of the screen. All of your dashboard lights ought to be free after that.
While you are taking the time to understand how to reset your dashboard, talk to Jerry about cheap auto insurance.
Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. The typical Jerry client saves $879 annually on auto insurance.
How is the code on a Honda Civic reset?
Honda Check Engine Light Reset
- OFFSET the ignition.
- The negative terminal should be found.
- Use a wrench to loosen the nut on the negative terminal.
- With your wrench, reattach the negative cable and tighten it once more.
- Your Honda car’s check engine light should be turned off after doing this.
What does Honda Civic service A123 mean?
My Insight has around 27,400 miles on it, and the service wrench was listed under item number A123. It’s an oil change, tire rotation, filter change, and cvt oil change, as far as I’m aware. I do intend to take it to Honda to have the work done. However, I already changed the cabin air filter two days ago at 27.2k miles after replacing the air filter with a K&N drop-in filter at roughly 20k miles. Simply put, I haven’t changed the oil or rotated the tires. However, I’m thinking that I should probably skip it unless my dealer offers to do it for free, which I doubt.
I simply need to know how much an oil change and a CVT oil change will cost and whether Honda will perform the CVT oil change well. If the CVT transmission’s filter has to be changed or not.
What is a 1/2 Honda service?
Another frequent code that appears when your engine oil, cabin air filter, engine air filter, or air cleaner element need to be changed is an A2 code. We can inspect all these parts for you when you bring your car in for routine maintenance, and we can offer recommendations that you can accept or reject.
How do I get rid of my B1 Honda Civic that needs service soon?
When the oil life indicator and maintenance code begin flashing, press the Select/Reset button and hold it for 10 seconds. Hold the button down until the Honda B1 service light goes off and the oil life indicator resets to 100%.
Is the B1 service required?
Here it is: the definitive explanation of what the Honda B1 service message signifies. It serves as a safety reminder that you should change your oil, replace your oil filter, and rotate your tires. Don’t ignore this warning because doing so could seriously risk damaging your engine.
How can you turn a Honda’s service light back on?
Four Steps to Reset Your Honda Oil Maintenance Light
- to start the engine (one click before starting the engine).
- The Select/Reset button can be found on your steering wheel or as a knob on your dashboard. Press it.
- For 10 seconds, hold down the Select/Reset button.