Given how many new vehicles BMW is releasing, it makes sense if some of them are smaller than you might anticipate. If that happens, you can decide that the luggage space provided falls short of your needs and start looking for alternatives. One of them is a roof box, which can be used to store a variety of items but requires the installation of railing carriers. Actually, those are the transverse bars you sometimes see on top of cars, where the boxes can be fastened.
In order to demonstrate how roof carriers are mounted, BMW created a brief film. Even while instructions are also included in the handbook you receive with the roof carriers, watching a video of the entire operation makes it much simpler to comprehend. To observe the locations where the carriers are mounted, make sure the roof rails are clean before you begin. To begin, you must unlock the support foot and lock it into position.
To accomplish that, crank the hand wheel counterclockwise until there is sufficient clearance. This must be done from both sides. Next, place the carrier on the roof and line it up with the locations indicated on the rails. The carrier must then be locked in place by rotating the same hand wheel in a clockwise direction. The wheel will produce an audible click at the conclusion, indicating that you have correctly tightened them.
Both the front and rear carriers require a similar procedure to tighten the hand wheel. You must lock the wheel in place after tightening and clicking. The only remaining steps are to cover the hand wheels and lock them using the supplied key. Just that. You can now proceed with adding a roof box to your vacation.
In This Article...
Can a roof rack for a BMW 1 Series?
Please note that a three-door car must have fitting points or rear-opening windows in order for the purchase to be valid. Please read the following fitting instructions.
With everything you need to attach it to your BMW 1 Series car, a brand-new complete roof bar/rack system can be installed in within 15 minutes without the use of any additional tools.
The pre-drilled connecting points located inside the roof of the BMW 1 Series vehicle are used to attach the roof bars to the car.
All BMW 1 Series 3 door and BMW 1 Series 5 door vehicles manufactured from 2007 to 2019 can use this roof bar/rack system.
These roof bars are produced by CAM in Italy to very high standards and in compliance with TUV & GS European Standards. 50 kg is the maximum loading on roof bars.
Includes:
PLEASE NOTE: Images are for illustration purposes only and may vary by automobile make and model.
Exist universal BMW roof racks?
Installing a base support system is necessary before attaching anything, including ski and snowboard racks, bike racks, luggage carriers, etc.
Base support systems are not ubiquitous, despite the fact that most roof racks are. You must get the appropriate BMW base support system for your vehicle because every BMW roof has a different size, width, and mounting point. Any sort of rack (ski, bike, baggage, etc.) can be mounted to the support system once it has the appropriate support system.
The OEM/Genuine BMW base support systems are strongly advised. Contrary to most products BMW produces, these are actually quite affordable, with the majority costing under $250. Although there are various aftermarket manufacturers, they do not install as well as the original systems and may wobble and rattle while being driven.
Can a car without a roof rack have one installed?
You have a choice between two mounting configurations if your automobile just has a roof. You can either choose a solution that uses clips to attach to your door jams or you can firmly attach a rack to the roof in a manner akin to the factory install choices.
Can I put roof racks on my own house?
With a roof rack, your car becomes an all-purpose, trip-taking machine for your active family. Even while basic roof racks are a common feature on many vehicles and SUVs, if your vehicle doesn’t already have one, you can install one yourself.
Whatever your car’s starting configuration—bare roof (no rack at all), roof rails (no crossbars), or complete rack—with these suggestions, you’ll quickly have your gear loaded and prepared for your next family vacation.
What is the price to install a roof rack on your vehicle?
For our clients, price is typically the most crucial consideration. We attempt to stock as many return and used things as we can because you’ll save money and it’s better for the environment (the majority of a rack’s carbon lifecycle occurs during original construction). We also provide a wide selection of brand-new roof racks, of course!
At ReRack, we only offer racks and accessories made by reputable companies like Yakima, Thule, and Rhino-Rack. These roof racks often have greater weight and gear capacities than stock manufacturing racks. The cost of a base roof rack will vary depending on if you want new components, an aerodynamic profile, and the year, make, and model of your car. Complete roof rack systems range in price from about $150 for a secondhand rack on older vehicles to more than $500 for a brand-new, top-of-the-line arrangement that is aerodynamic.
Can any automobile be fitted with a roof rack?
Unfortunately, not all roof racks will fit every car because every car has a different roof profile and requires a roof rack that is specifically tailored to that roof profile. Your car may have a variety of roof designs, including the following:
- fabricated rails
- Gutter systems
- Default mounting points
- fabricated elevated rails
- And frequently, automobiles devoid of any of the aforementioned
Our engineers create and develop legs and fit kits precisely to suit every mounting style, depending on the type of roof your car has. This ensures that they not only look excellent but also adhere to industry requirements.
Simply visit the Rhino-Rack website, select the Fit My Vehicle page, enter the make, model, and year of your car, and it will show you the roof rack systems and mounting options that are available to you.
Where should a roof box go on a vehicle?
Never mount a roof box directly to the roof of your car. Instead, it ought to be firmly fastened to some roof bars. Purchase reliable roof bars that fit your car and can support the weight of your loaded roof box.
In order to adequately divide the weight between the two roof bars, your roof box should be mounted on the roof bars. Additionally, make sure the box’s base is parallel to the road and that its sides align with the sides of your vehicle. As you drive, this will prevent any uplift caused by the wind hitting the box’s underside. Make sure the box is positioned so that your boot can open completely if you drive a hatchback car.
How should a roof rack be measured for crossbars?
Crossbar spread is measured from the back of the front bar to the front of the rear bar, not center to center.
Expert Reaction:
The crossbar spread, which is frequently used in conjunction with accessories like roof boxes like # TH6359B, is calculated from center to center. You can determine the crossbar spread needed for a roof box by measuring from center to center of the bar. The majority of roof boxes will tell you the lowest weight the box needs to be supported at and the largest opening it can accommodate. To help, I’ve included the size of this roof box.
Why are roof racks used on cars?
The best and safest method to transport baggage, bicycles, kayaks, and a variety of other goods that simply won’t fit inside your car is using roof rails and roof racks. Although roof racks and roof rails are similar, the key distinction is the way that they are attached to your car. Both will enable you to expand the amount of cargo you can carry and guarantee that you can move products securely.
The fact that the roof rails are frequently a design element of a car, yet their primary usage is as mounting points rather as carriers, is the reason we are asked this issue so frequently. You may load up your car and transport large equipment, such as sporting goods, camping gear, and a variety of other stuff, with the help of a roof rack. Regardless of the type of roof rack or rail added to your car, it’s crucial to properly secure your load. At Yakima, we believe that the best travel memories should be preserved long after you have returned home. Therefore, we want to make sure that your equipment is handled properly.
With our guide to roof racks vs. roof rails, you can choose which is ideal for your car and your requirements.
Are there universal roof racks available?
The United Kingdom has the most selection of vehicles of any nation, and you may drive a car from anywhere in the globe on its roads. No universal roof bar or roof rack is available that will fit every vehicle. No matter if you’re planning a staycation or a trip to the beach, your car needs the right set of roof bars.
Are crossbars required for a roof rack?
Crossbars and supports make up the foundation of a rack system. To span your car, you’ll need two crossbars and a means of fastening those bars to it. The elements you’ll hear us discuss are:
Depending on the size of your vehicle and the amount you intend to transport, the load bars come in a variety of lengths. Basic bars come in square or round shapes, but you may upgrade to wider, flatter bars that have an aerodynamic profile resembling an airplane wing. These are frequently quieter.
What distinguishes roof rails from roof racks?
You’ve probably thought about acquiring roof rails or roof racks if you want to expand your car’s cargo space. The best, safest method to transport luggage, bicycles, kayaks, and a variety of other items that simply won’t fit inside your car is using roof rails and roof racks. To support a roof basket, baggage box, ski rack, bike carrier, or kayak carrier, even a basic roof rail rack foundation may accommodate a wide variety of attachments and accessories.
Roof rails are another easy method to give your car a distinctive appearance and flair while also allowing you to secure cargo to the roof. The information provided here should assist you in choosing between roof rails and roof racks if you want to improve the load carrying capacity of your automobile but aren’t sure which option will work best.
Both roof rails and roof racks let you carry things safely on top of your automobile. This makes them extremely comparable. The direction in which these are positioned on top of your vehicles’ roofs is the key distinction between the two. For instance, roof racks are fitted across the roof and roof rails run the length of the car’s roof attached by feet or other installations.
Roof rails offer points of attachment for crossbars or other add-ons like a cargo box, a ski rack, or a cargo carrier. When necessary, it is simple to add and remove these baggage attachments. Vehicle roofs with flush-mounted roof rails lie flat with no gap between the rail and the roof.
Another distinction between the two is that roof racks are more durable and made to support heavier loads. It is crucial to have roof racks properly fitted since they can select the appropriate kind of roof rack for your requirements. They will also discuss the risks associated with loading the roof rack beyond its capacity.
Surprisingly, most people are unaware of the risks posed by a vehicle top that is overloaded. In addition to endangering the safety of the vehicle and its occupants, an overloaded roof rack can invalidate auto insurance claims in the event that the automobile is involved in an accident and its overloaded roof is found to be the cause.