The Honda B12 service is essentially just a routine inspection carried out by a Honda mechanic. The cost of the parts is roughly $80, and the labor cost is about $120 per hour. An experienced Honda mechanic can complete this task in 20 minutes, or maximum 30 minutes. A dealer will bill an hourly rate.
This service includes:
- visual fluid refills and checks (brake, tranny, windshield washer)
- tire turning
- replace the cabin air filter
- Change the oil and oil filters.
- air filter replacement
- visual inspections of the brake pads and axle boots
Within 30 minutes, the owner can easily complete the first three tasks. The air filter can be easily accessible and replaced if necessary (they don’t always need to be changed), and the cabin filter is located under the glove box. Although it takes a little longer to replace the oil, it can be done in 10 minutes.
Simply inspecting the wheels from below the car constitutes the axle boot examination. Rubber axle boots are often located where the rim is. They must be changed if they are torn. You definitely need a Honda mechanic at this point!
In This Article...
How can the service light on a Honda Civic b12 be reset?
Your Honda Civic’s computer keeps track of how far you go each day and how long the engine idles. The Maintenance Minder will illuminate an alphanumeric code in the center of your instrument cluster at the prescribed maintenance intervals to show what type of routine maintenance is advised.
The reminder system is reset after the maintenance is finished to begin counting down until your next oil change.
How is a Honda B12 cleared?
Every time one of the necessary maintenance tasks is finished, such as an oil change, tire rotation, air filter replacement, etc., your Honda Maintenance Minder light needs to be reset. Your maintenance reminder light shouldn’t need to be reset if you have your Honda serviced at a dealership. It should be done for you by the expert who completed your services. However, if you are performing your own maintenance on your Honda or if the technician neglected to reset the light for you, follow these easy steps to do it yourself.
Resting Honda Maintenance Minder Light
Depending on the vehicle, the light resets differently. Depending on the type of car you have, I’ll outline a few possible approaches.
st Method
The trip button is still present on several Honda vehicles, like the civic. This stalk protrudes from your dashboard and is typically used to select the information you wish to appear there or to reset your journeys. The only thing you need to utilize with this technique to turn off the maintenance reminder light is…
Release the trip button after it begins to flash, then press it once more. I’m done now. Now, the oil life ought to read 100%.
nd Method
On the lower right-hand side of the steering wheel of some Honda vehicles, there are up and down arrows with a reset button situated between them. These buttons are located on the steering wheel of some Honda SUVs, such as the Pilot. These are the only three buttons you will need to press when using this method.
In order to see the oil life percentage shown on the dash, press the down arrow button.
Hold down the reset button while waiting for the cancel or reset options to appear on the dash.
Press the up arrow to choose reset. Likewise, choose this option and press the reset button; the oil life should now read 100%.
rd Method
Any Honda trim model that has a touch screen and a home screen should be compatible with this technique.
You’ll be prompted with a screen that asks if you’re sure you want to reset it or not. Resetting should fix the issue. The oil life should read 100% and your maintenance minders should no longer be present.
Follow the link below for a list of maintenance minders and what they signify if you have a maintenance minder light on but are unsure of what it means.
What does the Honda B1 stand for?
You might be thinking, “What is Honda B1 service? ” if the Maintenance Minder in your Honda car, SUV, or truck displays a Honda B1 service code. The number “1 indicates that a tire rotation is necessary, and the letter “B indicates that your car needs an oil change and a mechanical examination.
How do I reset the code 12 on my Honda Civic?
Let’s assume that you completed all of the A12 code’s listed repair requirements. That’s fantastic. The dealership is not required to complete this for you. The vehicle still has to be informed that this has been completed in order for it to restart monitoring the miles and reset the oil life.
Depending on the model year and trim you have, some procedures may vary. In this video, we’ll go through the fundamental methods for resetting the maintenance reminder system. The Honda Civic from 2016 to 2018 can be serviced using this procedure; other models follow a similar procedure.
Take these actions:
- A little button that allows you to page through the displays is located on the left side of the steering wheel. Continue doing this until the oil life display (if that’s what you changed) appears.
- Take note of the wrench, the maintenance reminders, and the listed code.
- For roughly 10 seconds, keep the enter button depressed. The maintenance reset screen appears as a result, switching from the main screen.
- Double-click the start/stop button. This turns on the electricity system. The car doesn’t need to be fully started.
- To choose the one you want to reset, scroll through. Keep holding down the enter key. The necessary maintenance reminders are reset by doing this.
What is a Honda service B reset?
You must reset the Honda Maintenance Minder after taking care of your maintenance issues. Turn the ignition switch on, hold down the Select/Reset knob until the engine oil life indicator appears, and then hold it down once more for at least ten seconds. The maintenance item code and the indicator will then flicker. Press the knob again for five seconds after that. The engine oil life indicator will reset to 100% after the code disappears.
How is the code on a Honda Civic reset?
Honda Check Engine Light Reset
- OFFSET the ignition.
- The negative terminal should be found.
- Use a wrench to loosen the nut on the negative terminal.
- With your wrench, reattach the negative cable and tighten it once more.
- Your Honda car’s check engine light should be turned off after doing this.
On a Honda Civic, how do you reset the dashboard?
It’s encouraging to hear that you maintain your vehicle by having it serviced. Although resetting your dashboard is a simple procedure, think about having a mechanic inspect your automobile once more. Even while the majority of automobiles need to be manually reset after repair, numerous lights flashing simultaneously could indicate a more significant problem.
Having said that, if you are certain your 2019 Honda Civic is in perfect working order, follow these instructions to reset the dashboard:
- Don’t touch the brake; instead, push the Engine Start button twice. You intend to switch into accessory mode.
- Press Home, followed by Settings, on the infotainment screen’s upper left corner.
- Press the car. Select Maintenance Info after that.
- From this point, click Select Reset Items to choose which dashboard lights you want to reset.
- Choose All Due Items if you want to start from scratch. There will be a Reset option in a pop-up window.
- When you choose, a notification informing that your maintenance information has been reset appears at the bottom of the screen. All of your dashboard lights ought to be free after that.
While you are taking the time to understand how to reset your dashboard, talk to Jerry about cheap auto insurance.
Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. The typical Jerry client saves $879 annually on auto insurance.
How do I get rid of my B1 Honda Civic that needs service soon?
When the oil life indicator and maintenance code begin flashing, press the Select/Reset button and hold it for 10 seconds. Hold the button down until the Honda B1 service light goes off and the oil life indicator resets to 100%.
Is the B1 service required?
Here it is: the definitive explanation of what the Honda B1 service message signifies. It serves as a safety reminder that you should change your oil, replace your oil filter, and rotate your tires. Don’t ignore this warning because doing so could seriously risk damaging your engine.
How can you turn a Honda’s service light back on?
Four Steps to Reset Your Honda Oil Maintenance Light
- to start the engine (one click before starting the engine).
- The Select/Reset button can be found on your steering wheel or as a knob on your dashboard. Press it.
- For 10 seconds, hold down the Select/Reset button.
What does the Honda Accord’s 13b code mean?
If the Honda Civic displays the B13 code, it’s time to change the gearbox fluid and engine oil.
This number indicates that it’s time to replenish the transmission fluid and engine oil.
We can help if you’re looking for a solution to the problem that’s causing your Civic to display code B13. Here, we’ll discuss the value of transmission fluid as well as how to fix your car’s B13 error code. Finally, we’ll cover what other Civic owners have to say about their problems with this code and how you can find out more if you’re considering buying a Civic.
The function of the Honda Maintenance Minder.
When an oil change and routine maintenance are required, the Maintenance Minder System employs the on-board computer to continuously monitor the engine’s operating characteristics, including speed, engine temperature, ambient temperature, time, and vehicle use.