How Much Oil Does A Hyundai Elantra Take?

For the Hyundai Elantra, you can anticipate using around 4.2 quarts, but make sure to double-check the details in your owner’s handbook. Change the oil well cap. Use your dipstick to check the oil level before you clean up. If the volume is low, gradually add more oil and keep checking until there is enough oil.

Learning more about the oil type and capacity for your 2017 Hyundai Elantra is a wise move. The Elantra is a car that may last a LONG time if maintained consistently.

It’s important to keep up with routine maintenance in order to keep your Elantra running properly for years to come. These stylish, capacious sedans are adored by many drivers.

What kind of oil is required for my 2017 Hyundai Elantra, and how much of it is there?

This car uses oil that is 100 percent synthetic. While the 2.0L (122 ci) four-cylinder engine uses 5W-20 oil, the 1.4L (85 ci) and 1.6L (97.1 ci) four-cylinder engines both require 5W-30 oil. The 1.4L engine requires 4.4 quarts of oil, the 1.6L engine requires 4.8 quarts, and the 2.0L engine requires 4.2 quarts.

Now that you know the kind and amount of oil your Elantra needs, let’s discuss why synthetic oil is a wise choice, how keeping up with routine oil changes can increase the lifespan of your vehicle, and what other drivers are saying about the 2017 Elantra maintenance plan.

Engine oil volume for the Hyundai Elantra in quarts and liters

How much engine oil is required for an oil change, including the replacement of the oil filter, on a first-generation Hyundai Elantra?

If you wish to perform maintenance on your Hyundai on your own and you don’t know how big your engine is or how many quarts or liters of oil enter in your car engine, you can see below what your car’s engine oil capacity is and what kind of oil you need to use.

  • Please leave a comment on this post with the model and type of your automobile, the engine’s capacity (diesel or gasoline), the year it was built, and how many kw or horsepower it has if you want to know exactly what engine oil is advised for your car.

The owner’s manual for the Hyundai Elantra is where we got all of our information about the engine and gearbox oil capacities.

Here are the instructions for how to reset the Hyundai service light after changing the engine oil.

How much oil should a 2013 Hyundai Elantra be filled with?

The oil volume of the 2013 Hyundai Elantra is 4.2 quarts, or over 4 liters. Make sure you don’t confuse your engine’s displacement, which is the 1.8-liter space its cylinders occupy, with its oil capacity.

How much full synthetic oil can a 2013 Hyundai Elantra handle?

We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.

How often should the oil be changed in a 2012 Hyundai Elantra?

For traditional oil, Hyundai advises having your 2012 Hyundai Elantra’s oil and filter replaced every 3,000-5,000 miles. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.

What happens if the wrong oil is placed in the car?

Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Adding brake fluid or motor oil incorrectly might also ruin your transmission.

5W20 or 5W30 oil, which is thicker?

Thus, 5w20 is a thinner oil during operation temperatures than 5w30 due to viscosity, whereas the latter is thicker. Most manufacturers today create engines that run on 5w20 oil, thus it’s crucial to keep with this viscosity and not switch to 5w30.

Can I replace the 5W-20 in my Hyundai with the 5W-30?

It is not advised. Despite having the same winter rating of 5, 5w30 is slightly thicker (higher viscosity) than 5w20. This means that using the high viscosity oil could damage your engine.

Does 5w30 work well at heavy mileage?

With over 75,000 miles on the odometer, Mobil 1 High Mileage 5W-30 advanced full synthetic motor oil is made to safeguard vital engine components for up to 10,000 miles in between oil changes and help extend engine life.

Nothing works better overall than Mobil 1, a motor oil that is a part of many various car models, including a few high-performance ones.

Specifically created for high mileage vehicles, Mobil 1 High Mileage 5W-30 motor oil is made with a specific combination of high-performance synthetic base stocks and is strengthened with a carefully balanced additive component system.

ExxonMobil advises using Mobil 1 High Mileage 5W-30 motor oil in high mileage cars, especially those that have previously used lower-quality conventional oils+, such as:

  • Cars
  • Trucks
  • SUVs
  • Vans

The Mobil 1 High Mileage 5W-30 motor oil excels both our traditional and synthetic mix high mileage oils in terms of overall lubrication and wear protection. It also meets or exceeds the strictest industry standards. Additionally, the sophisticated full synthetic formula can:

  • Boost engine longevity
  • Utilize active cleaning solutions to remove engine sludge
  • Eliminate leaks

*Protection lasts for a year or 10,000 miles, whichever comes first. Read our Mobil 1 limited warranty for more details.

+Mobil 1 High Mileage can assist by minimizing the sludge left behind in your engine if it has excessive sludge deposits as a result of subpar maintenance procedures. Short oil change intervals (3,000–5,000 miles) are advised for the first couple of oil changes as the sludge is reduced in severe cases of sludge. Even Mobil 1 cannot undo years of negligence in cases of engine damage that may have been caused by subpar maintenance.

Which is better for high mileage: 5w 20 or 5w 30?

Fuel Efficiency 5w-20 oil is typically thinner than 5w-30 oil, allowing for easier flow and higher fuel efficiency. However, 5w-30 oil is made for engines with higher mileage and might provide superior wear and tear protection.

What happens when 5w20 and 5w30 are combined?

It is crucial to understand both oils in order to fully comprehend what happens in the engine when the two oils are combined.

The letter W in the SAE (Society of Automotive Engineers) format of the multi-grade oil designates that both multi-grade oils are acceptable for winter and, consequently, are suited for low temperatures.

The number before the letter denotes viscosity below zero degrees Celsius, while the number after the letter denotes viscosity at one hundred degrees Celsius.

Due to its increased viscosity, the 5W30 multi-grade oil is utilized throughout the summer and in tropical areas as it is more suited to use in hot temperatures.

This does not, however, make using the oil in cold weather unnecessary. However, the 5W20 oil performs better in colder climates.

So what will happen if you combine the two oils? Since the two oils have different viscosities and additives, they won’t completely combine to form a single oil combination.

Your engine might not immediately suffer if you combine the two oils for usage in an emergency.

However, using a combination of both oils in an unsuitable engine could cause serious long-term engine damage, including overheating, sludge buildup, oil leaks, and deposits.

Therefore, it is advised that you flush the oil and replace using the proper engine oil if you must use incompatible oil in an emergency.

Can 5w30 be used in place of 5w20?

Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. Actually, using low viscosity engine oil to increase fuel economy “not only decreases frictional loss of the engine oil seal but also have no defect in the performance,” according to the SAE.

Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.

While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.

What makes 5W-20 and 5W 30 different from one another?

These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.