Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart, by Mobil 1 (Part No. 14977)
In This Article...
Which oil is recommended for a Toyota Tacoma?
Which is better for your Toyota Tacoma when it comes to oil changes or additions? The best oils on the market were identified because we want to ensure that you give your Tacoma the greatest care possible. Below are our conclusions.
Toyota Tacoma requires 5W-20 and 0W-20 oil, both of which are readily available on the market. Selecting an API-certified engine oil might help if you want to make sure the oil you use is good for your Toyota. Despite the fact that there are many great non-certified oils available, API certification might provide you piece of mind while lubricating your motor. The top seven oils for your Toyota Tacoma are shown below:
- Castrol Edge Advanced Full Synthetic SAE 0W-20 Extended Performance
- Extended Performance Full Synthetic 5W-20 from Mobil 1
- Advanced Full Synthetic 0W-20 Valvoline
- Platinum Full Synthetic 0W-20 Pennzoil
- Full Synthetic Shell Rotella 5W-20
- New Generation Liqui Molygen 0W-20
- SAE 0W-20 Royal Purple
You still have a lot to learn about properly maintaining your Toyota Tacoma. Continue reading to learn how to check your Tacoma’s oil, how many quarts are required, where to locate the filter, and other topics.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
The Toyota Tacoma V6 uses what kind of oil?
Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.
How frequently should the 2013 Toyota Tacoma’s oil be changed?
For traditional oil, Toyota advises changing your 2013 Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. Remember that the best way to determine the intervals for your car is to consult the owner’s manual and the dealer.
Can I substitute 0W-20 oil for 5w20 oil?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
How frequently should a Toyota Tacoma have its oil changed?
One of the most fundamental and important maintenance for your car is an oil change. For standard oil, Toyota advises changing your 2021 Toyota Tacoma’s oil and filter every 3,000–5,000 miles. Changing synthetic oil should be done every 7,500 to 10,000 miles.
How much oil does a Toyota Tacoma V6 require?
This vehicle is propelled by a 3.5-liter V6 engine with a 6.2-quart or 5.9-liter oil capacity.
The 3.5-liter volume is actually the displacement of your engine, which is not the same as oil capacity. The cylinder volume swept by all of the pistons in a piston engine is measured as displacement.
What kind of oil does a 2019 Toyota Tacoma 3.5 need?
The name of the oil refers to how thick or viscous it is. The numbers before the W, which stands for winter, indicate the thickness of the oil at 0°F, and the numbers after the dash indicate the thickness of the oil at 212°F. The group that assigns codes to oil viscosities is known as SAE, or Society of Automotive Engineers.
Full synthetic oil contains less contaminants, better characteristics, and is created with additives that function better than regular oil.
Any full-synthetic oil with the right viscosity, such as Mobil 1 – Extended Performance 0W-20 Full Synthetic Motor Oil, would work just fine. However, Toyota explicitly advises using Toyota Genuine SAE 0W-20 Full-Synthetic Motor Oil.
A synthetic mix is an option if you’d want to save some money (synthetic motor oil may be rather pricey), but bear in mind that you might need to change your engine oil more frequently. Castrol GTX 0W-20 High Mileage Synthetic Blend Motor Oil is what we advise.
What volume of oil does a Toyota Tacoma consume?
Online now to make an oil change appointment for your 2020 Toyota Tacoma! There might be exclusions. 5 or more quarts. The extras are 5w30 and 0w20.
Toyota 0W-20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Do I need synthetic oil for my Toyota?
Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
Is 0W20 harmful to engines?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- Can 0W20 harm an engine?
- A reader asks the following: “My new pickup truck’s engine requires 0W-20 engine oil. This is a major adjustment for me because I’ve never owned a car that didn’t use 5W-30. I’m really dubious about a 0W-20 oil because it seems too thin. My dealer said that 0W-20 must be used in order to uphold my warranty, despite my request to at least use 5W-20. My new engine: Is 0W-20 safe for it?
- Incontrovertibly, 0W-20 is safe for your engine. There is absolutely no evidence that engine wear rates have increased since manufacturers started recommending 5W-20 and 0W-20 at the beginning of the previous decade. Engine wear has never been lower thanks to significant advancements in engine designs, materials, and motor oil chemistry during the past 15 years. In new autos, the 5W-20 and 0W-20 grades are quickly replacing the 5W-30 rating. A new vehicle with a 5W-30 specification won’t be common by the end of this decade. In fact, in the years to come, we can anticipate much lower viscosities, such 0W-16.
- Why do automakers recommend using thinner motor oils? To put it simply, to increase fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that the shortened engine life has no negative effects.
- Regarding the second half of your query—using 5W-20 instead of the advised 0W-20—we see no benefit whatsoever in doing so. Let’s prove our idea using the characteristics of the AMSOIL Signature Series 0W-20 and 5W-20.
- The unit of measurement used by the industry to assess viscosity at operational temperature is “100C centistokes are used.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
Can I Use 0W-20 Instead Of 5W-20?
The thin oil viscosity grade 0W-20 is frequently used in freezing temperatures. Diesel and gasoline engines are often advised to use it for cold starts and reduced oil usage.
Similar in viscosity to 0W-20 and suitable for low-temperature environments, 5W-20 has a little thicker oil viscosity than 0W-20.
While switching back and forth between the two may not immediately harm your engine, it will have a negative impact on your oil change schedule and overall engine performance over time.
Therefore, unless absolutely necessary, you shouldn’t change your oil’s viscosity from that suggested by the manufacturer of your vehicle.
Can I Mix 0W-20 And 5W-20 Oil?
One thing to note is that SAE 0W oil is usually synthetic. 5W-20 may be conventional, synthetic, or a blend of both. Even if both of your oils are totally synthetic, combining them may still have an impact on how much gas your car uses and how efficiently it uses that gas.
It’s also possible that the additives in your 0W-20 and 5W-20 oils are incompatible with one another, such as viscosity modifiers and corrosion inhibitors. It is therefore better to avoid combining or switching them.
Are 0W-20 And 5W-20 Available As Synthetic Oil?
The base oils and additives in 0W SAE oils are always synthetic or semi-synthetic. Due to their decreased viscosity, these oils must be extremely dependable in freezing weather environments.
The behavior of conventional oil can vary and it degrades very quickly. In order to ensure that 0W-20 oil will flow in freezing temperatures, it typically contains a base oil that is either entirely synthetic or semi-synthetic.
Since 5W-20 is also available as conventional oil, it has a slightly greater viscosity level and is therefore more adaptable in terms of oil types.
However, the conventional and synthetic versions of this oil have noticeable variances. Better still is 5W-20 synthetic motor oil, which has longer oil change intervals and better fuel economy.