Advanced Full Synthetic 0W-20 Motor Oil, 5 Quart, Valvoline (Part No. 881150)
In This Article...
Is full synthetic oil required for a Toyota Corolla?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
How many quarts of oil does a 2018 Toyota Corolla require?
Online now to make an appointment for an oil change! Up to 5 quarts of genuine Toyota conventional oil (5W20).
What is the purpose of 0W-20 oil?
The most popular and widely used motor oil grades have evolved over time to match the engines that automakers have utilized. In the 1960s, it was typical for a vehicle to need a monograde oil, with the viscosity or grade needed varying with the season. Multi-grade oils have taken the place of the requirement to switch grades according to the seasons or weather as motor oil chemistry has improved.
The size and power output of engines have varied substantially as vehicle engine technology has advanced. In order to protect the engine, it was typical in the 1970s to have an extremely huge engine (6-cylinder and 8-cylinder engines were the most popular). 20W-50 and 10W-40 were the most often used grades at the time. Smaller engines required lower viscosity motor oils as fuel efficiency became more important, which over time led to a growth in demand for the 10W-30, 5W-30, and 5W-20 grades.
Modern engines are developing more quickly than ever. Engines are being designed by automakers to be lighter and smaller while producing more power than ever. Thinner lubricants with improved engine protection and cleaning capabilities are required to safeguard these smaller, more powerful engines. This has caused 0W-20 to be the motor oil grade with the quickest rate of growth.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Toyota 0W-20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
How often should an oil change be performed on a 2018 Toyota Corolla?
Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. One of the most fundamental and fundamental services for your car is an oil change. For traditional oil, Toyota suggests changing your 2018 Toyota Corolla’s oil and filter every 3,000 to 5,000 miles.
Is synthetic oil 0w20 good?
A great winter viscosity grade oil is 0W-20, which offers good engine performance and a smooth oil flow. It is perfect for cold starts and below-freezing temperatures due to its thinner oil structure. It can significantly improve the performance and vital engine components of the car in the appropriate engine.
The most important thing to keep in mind is to give your automobile some TLC by getting normal maintenance and frequent oil changes.
We provide superior ASE-certified mechanics and affordable mobile automobile repair and maintenance services to meet the demands of your car.
Share this narrative:
How often should I have my Toyota Corolla’s oil changed?
The Toyota Corolla has a longstanding reputation for being a durable vehicle. Because of this, Corolla models that are more than ten years old are still being driven today. With the right maintenance and care, your Corolla will survive for many more years. Taking your car in for routine oil changes with your service provider is one strategy to extend the life of your vehicle.
There are still a lot of questions about how frequently you should have the oil changed in your car, even though the majority of dealerships provide a suggested mileage or return date. You can find the suggested oil change schedule, which is roughly every six months or 5,000 miles, in the Toyota guidebook that came with your Corolla.
However, many motorists choose to replace their oil more frequently, taking their vehicles to the shop every three months or 3,000 miles. It’s generally reasonable to presume that you need an oil change if you are unsure of when your last one was and can’t recall when it was done.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
What happens if I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Another low-temperature grade of motor oil that is commonly advised for usage in the winter is 5W20; a 10W-30 grade is an alternative for higher temperatures. This type of oil is widely used because it offers the best fuel efficiency, reduces fuel consumption, and produces fewer exhaust emissions. Motor companies and governments from countries like Japan, Europe, and the United States are all looking for 5W20.
Both 0W20 and 5W20 are high-quality, low-viscosity synthetic grades that can significantly improve fuel efficiency. When employed in warm weather, their qualities are the same. Similar to the use of the two variants under frigid temperatures, there is little to no difference between them.
Which is preferable, 5W-30 or 0W-20?
Pay particular attention to the quality testing done while selecting a motor oil. Both the API donut and the starburst sign should be visible on the packaging.
The American Petroleum Institute’s testing was successful, as evidenced by the API donut. The starburst is also used to demonstrate eligibility for SL service.
Location
You must take the region into account while selecting the ideal oil viscosity from the suggested possibilities. For instance, 5W20 can be used in somewhat warmer settings while OW20 will perform better in cold climates like Maine or Alaska.
Having knowledge of the temperature range aids in selecting the proper oil. The temperature range for 0W-20 oil is -40 to 68F. In contrast, the operating temperature range for 5W20 oil is -31F to 68F and for 5W30 oil is -31F to 104F.
Fuel Economy
Because the lubricant flows more easily, the higher the fuel efficiency, the thinner the oil viscosity. As a result, 5W20 will run similarly to 0W20 once the engine has warmed up, but 0W20 will be more fuel-efficient during startup.
In both colder and warmer climates, 0W20 offers greater fuel efficiency than 5W30. However, 5W20 only performs better than 5W30 in hotter environments.
You can give the engine the protection it needs to last longer by using the proper oil in it. Make sure you do your study before selecting oil to attain the performance level you need.
Is it acceptable to substitute 0W20 for 5W-30?
No, you shouldn’t use a thinner SAE grade or a thicker oil for a suggested thinner oil vis-grade if your owner’s handbook calls for a thicker oil. The performance of your car’s engine will be protected and maintained if you use the right viscosity motor oil. Thus, while your vehicle is still covered by its manufacturer’s guarantee, always follow their advice.
**If your vehicle calls for 0W-20, avoid using 5W-30 in the rear. The vis-grade number and grade must match.