The M DCT with Drivelogic has a lot of benefits, one of which is that it always chooses the best drive connection. Gear changes happen incredibly quickly while still feeling smooth and without significantly affecting the car’s traction. This mimics the direct power connection that manual transmission drivers experience. By using the shift lever or the shift paddles on the steering wheel, gears can be changed automatically or manually. In both modes, the M DCT allows for dynamic and quick acceleration and overtaking actions. The launch control also ensures the best acceleration starting from a stop.
In This Article...
How to operate the dual-clutch transmission according to BMW M
Do you still recall how BMW marketed themselves as the Ultimate Driving Machine? Even though those times are long gone, BMW continues to produce a few hits.
Despite this, it is obvious that BMW’s primary customer base has shifted, necessitating the release of a video by the car manufacturer demonstrating how to operate its own dual-clutch transmission. While manufacturers like Honda want you to appreciate manual transmissions, BMW should demonstrate how to put one of its M vehicles in park.
The issue here is that there is nothing near the gear selection that says “Park.” Instead, you just need to turn off the automobile to activate Park. The remainder will be handled by the transmission and computers, and the gauge cluster’s signal will certify that the BMW has truly been moved into Park.
However, once you’re upright and prepared to move, you might require assistance finding out how to do it. Just press the gas and start moving. Despite occasionally acting like a manual transmission, The Ultimate Driving Machine’s gearbox is still primarily an automatic. We should advise you that using a DCT in first gear occasionally results in a clunky, unpleasant experience. It’s not a BMW problem; it’s a problem that almost every dual-clutch transmission on the market has. In order to overcome this, you can either floor it or slowly roll away till you’re moving smoothly. With half stepping, there is no smoothness to be discovered.
Drivelogic is a system that BMW has. This enables you to control the intensity and pace of the gear shifts. There is a simple button, and pressing it makes the Drivelogic system more aggressive. There are four settings, and moving from one to the next only requires a quick touch of the aforementioned button.
Therefore, if you’re a lucky automobile buyer with the means to buy a BMW M car, you might also need to know how its transmission works. To sum up, you select Drive and press the throttle to advance. Simply turn off the automobile to put it in park. Turn the car back on, put it in drive, then go to your dealer and ask for a car with a manual transmission to fully reward yourself with a thrilling driving experience.
Let BMW also instruct you in drifting:
Here’s how, for instance, the gearbox’s intelligent Low Speed Assistant functions. There is no torque converter and the vehicle won’t begin to roll when you release the brake pedal because the DCT is essentially based on a manual transmission. One light touch of the gas pedal is all it takes to start the Low Speed Assistant working, just like it would with a typical manual transmission. Once it starts functioning, the automobile will continue to move at a speed of 2 to 3 miles per hour if you let up on the gas and don’t brake (4-5 kilometers per hour).
Have you seen the tiny button next to the gearshift? The Drive Logic system manages the rate of gear changes. Simply leave the transmission in the regular mode for the most comfortable driving experience when you are just driving around town and don’t require the highest performance. When on course, tap it three times to display three tiny bars directly below the gear indication on the instrument cluster. You are now prepared to defeat everyone.
BMW still use DCT?
When Dual Clutch Transmission disappears, it’s undoubtedly a sign of the times. Whether you love it or detest it, it will be missed! The DCT proved that BMW truly is the Ultimate Driving Machine and was the best there is!
The popularity of the dual-clutch transmission (DCT) used by BMW M, a multi-speed transmission technology that uses two distinct clutches for odd and even gear sets, cannot be questioned. In fact, drivers who had M vehicles with it were head over heels in love with it! This is due to the fact that it produced rapid-fire shifts, was simple to use in any traffic, and provided more theater than the standard automatic. Bottom line: DCT sped up automobiles!
The DCT’s gear selector, which was described as a “bizarre type of transmission,” had the look of a frozen tear drop and had the most peculiar pattern. However, that pattern gave it personality and made it evident that it wasn’t your ordinary automatic gearbox. On the contrary, it was far more intriguing and unusual. The ancient DCT was in so many fantastic automobiles. It had excellent paddle shifters behind the wheel and had many levels of shift aggressiveness. You could be certain that you were operating a performance vehicle with a DCT and extremely quick, jerky shifts.
Fans of the DCT were a little miffed when the F90 M5 moved to a traditional, torque-converter 8-speed automatic from ZF. Even though the 8-speed was a top-notch automatic, people craved the quicker, full-throttle upshifts of the previous DCT. So, fans were much more disappointed when BMW gradually stopped offering the DCT for the M. That’s because the original DCT was associated with so many fantastic automobiles.
However, BMW has made the decision to abandon Dual-Clutch Transmissions in favor of conventional 8-speed torque converters, even in the M vehicles. The F90 generation M5’s 2018 model year launch marked the start of this transformation.
Following the phase-out of the DCT were the F10 BMW M5, F06/F12/F13 BMW M6, F80 BMW M3, and F82 BMW M4. DCT was originally an option for these cars, but it is no longer available. The new G80 BMW M3 and the G82 BMW M4 have both switched to the ZF 8-speed, hence the M Division no longer offers a dual-clutch option. And that modification is long-lasting.
Fans of the DCT should be aware that the BMW M2 is the only vehicle still using the BMW DCT.
All self-shifting transmissions for the M Division moving forward, whether they be the present ZF 8-speed or an upgraded model, will be conventional torque-converter automatics. Sadly, neither now nor in the future will there be a dual-clutch option. The DCT has officially said goodbye since efficiency is of the utmost importance in today’s automated environment!
BMW discontinued DCT, why?
The ZF eight-speed is more effective and simpler to adjust for maximum efficiency, which is the real cause. The DCT is a victim of the times since efficiency in today’s automotive environment is more important than virtually everything else. Additionally, BMW M will soon make the transition to electrification.
How quick is the BMW DCT?
DCT is a product of BMW Motorsports, where winning on the racetrack depends on every tenth of a second.
The Performance Option 7-Speed Double-Clutch Transmission, which first appeared in the M3 Coupe, Sedan, and Convertible, is currently available for the new M3 and M4 vehicles and costs $2,900.
The BMW gearbox mechanism that enables quick gear changes is the 7-speed M DCT. Without interfering with the tractive forces like power and traction, it can reach 9,000 RPM.
How trustworthy is BMW DCT?
DCT is a powerful unit. It is capable of 400lb-ft of torque at 9000 rpm. Strong, however, does not equate to trustworthy. In the end, it is more complex than the MT, and complexity equates to less reliability.
What is it that a DCT automobile cannot do?
One of the major errors individuals make when operating a DCT or direct shift gearbox is this one. When utilizing the accelerator paddle to keep the car steady while descending hills is OK, doing so with a DSG will put a significant strain on the gearbox. The clutch will be engaged, slipping, and producing an excessive amount of heat and wear. Therefore, if you want to get longer life out of both clutches, you should use the brake pedal to prevent the car from rolling back on hills.
Can a DCT be used to drive like an automatic?
One clutch controls the odd-numbered gears, and the other clutch controls the even-numbered gears, in a dual clutch transmission. There is no clutch pedal necessary because the two clutches work separately.
Dual clutch transmissions offer a better driving experience since shifting occurs more smoothly and in milliseconds. Also smoother and easier is acceleration. The fuel efficiency of a dual clutch transmission can also be increased.
Comparing dual clutch transmissions to conventional automatic transmissions, several benefits may be available. Most significantly, a dual clutch transmission will yield better fuel economy than an automatic.
In essence, a computer-controlled dual-clutch transmission is a manual transmission. It is, however, technically a form of automatic transmission because there is no pedal and little exertion on the part of the driver.
Driving a dual clutch is different from driving an automatic. Even though gear shifting is swift and computer-controlled, you still need to manage it personally to keep the gearbox in good operating order.
What’s the weight of a BMW DCT transmission?
There are four variations of the BMW 7-Speed DCT, often known as the GS7D36SG. With the exception of the gear ratio and bell-housing configurations, they are nearly identical. They all weigh about 175 pounds and have the same input spline, filters, and oil pan.
Can DCT be used in a city?
Multiple internal computers control a dual-clutch transmission (DCT), also known as a twin-clutch gearbox or double-clutch transmission. The entire procedure is automated thanks to these computers, which do away with the necessity for the driver to manually shift gears. You would need to softly press the accelerator while traveling in bumper-to-bumper traffic and avoid keeping the engine on the boil. You won’t experience any DCT overheating problems if you drive calmly. With its incredibly fast changes, the DCT gives the impression of being an automatic transmission that best suits the enthusiast. Their fuel efficiency is entirely dependent on your driving style. A mild, smooth input will produce good efficiency and, in most situations, will come quite near to the efficiency figures you may get from a car with a manual gearbox. A DCT is therefore the greatest all-around vehicle, especially if your driving isn’t restricted to highway or city driving.
Is DCT a more trustworthy option than automatic?
Dual-clutch transmissions are substantially less dependable than standard automatic transmissions since they have more moving parts. A DCT is more sophisticated than an automatic transmission since it has two gearboxes (one for even ratios and one for odd gears), several sensors, and other components.
Is automatic DCT dependable?
Autos with automatic transmissions are often dependable, and both DCT and CVT autos share similar reliability and upkeep costs. However, in the event of damage, both DCT and CVT automatic gearboxes will need to be completely replaced. Since they are expensive to replace, both transmissions will last longer with regular maintenance and safe driving habits.
Is DCT a quicker shifter than an automatic?
Shift time is the period of time a transmission needs to change gears. Power supply is transferred to the next selected gear during this interval, and engine speed is adjusted to match the speed of the next gear. Although shift time typically refers to motor vehicles, it can also refer to any gearbox.
In performance and racing automobiles, shortening the shift time is crucial because upshifting typically disrupts power transfer to the wheels. The driver controls the shift time in a manual gearbox, but in automatic or automated manual vehicles, the electronic or hydraulic control system needs to be calibrated and adjusted to carry out quick gear changes. In general, a dual-clutch transmission changes more quickly than a single-clutch automated manual transmission or a typical hydraulic automatic transmission with a torque converter. This is possible because the DCT may reduce shift times by pre-selecting the next gear and switching between its two different clutches to that predetermined gear. Utilizing a freewheel may shorten shift times since the clutch may not be required. Another goal of a shift kit is to speed up shifts in manual transmission cars.
By adding a lighter flywheel to a manual transmission, upshift time can be shortened. A lighter flywheel will enable the engine speed to fall more quickly, resulting in quicker shift times. During an upshift, the engine speed must decrease to synchronize with a higher gear.