Make sure your current remote key fob actually needs to be replaced before spending money on a new one. If it’s not working, the battery can just be dead.
You might be able to skip this step if your BMW has a key fob that you need to place in a slot on the steering column. Many of these key fobs include rechargeable batteries that are intended to be charged automatically while in use; as soon as the key fob is inserted into the ignition slot, the charging process begins.
However, if you have a more current fob, it is possible that the battery is a non-rechargeable CR 2450 and will need to be changed from time to time. Simply remove the rear panel of your fob and replace the coin cell battery to complete this easy DIY project.
A battery should last one to three years before needing to be replaced, depending on your car and usage.
In This Article...
A 2015 BMW key fob requires what kind of battery?
Numerous F-Series models from the years 2011, 2012, 2013, 2014, 2015, 2016, and 2017 use this key, including the 3, 5, 7 series, and the X3. You’ll need a CR2032 battery to replace the slender, angled BMW key battery.
How much power does a BMW 328i key require?
The battery in your BMW key is a CR2032. the old BMW key fob batteries with care, then gently insert the new one after removing the key fob cover.
Which battery type should I use in my BMW key fob?
A CR2032 battery is necessary for BMW key fob battery replacement for drivers who have BMW Comfort Access. To replace the battery in your BMW key fob, follow these steps: Remove the metal valet key by pushing in the little tab on the side of your key fob.
How can I recharge my BMW 328i remote’s battery?
That seems annoying. Fortunately, replacing the battery in a key fob for a BMW 328i is not too difficult. Here’s how to go about it:
- Start by pressing and holding the little button at the key fob’s base. You can do this to take the metal key off of your key fob.
- Find a small hole by feeling around the key fob’s edge. Use your metal key or a small flathead screwdriver to remove the key fob’s back plate off.
- Remove the old battery with care. You must orient your new battery in the same direction as your old one, so be sure to take note of where the negative and positive terminals are located.
- Put the key fob’s fresh battery in there. As you do this, try to avoid touching the terminals because doing so could shorten the key’s battery life.
- Replace the back panel last. The two parts should click together when they are joined properly. After that, you may test out your new key fob batteries by inserting the metal key.
Why not use the extra time to explore your options for auto insurance using the Jerry app while you’re changing the battery in your car remote? Simply download the app, respond to a few short questions, and you’ll see a list of affordable estimates from companies like Nationwide and Safeco.
Do you need to reconfigure your BMW key fob after changing the battery?
A remote key fob needs to be associated with your vehicle particularly in order to be secure.
This stops people who drive the same make and model of automobile as you from using their remote to access your car. You’ll need to reconfigure the fob if changing the batteries has reset this connection or if it was somehow disrupted in order to get it to detect your car once more.
How much does a new BMW key fob battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
What occurs if the battery in your BMW key dies?
You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.
Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.
Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.
Can I replace the battery on my own car key?
Thankfully, most car key battery replacements can be completed quickly and affordably at home without the need for specialized knowledge.
Batteries for car keys have a coin-like shape and are flat and rounded. It’s important to make sure you are purchasing the correct battery before making a purchase.
To do this, you must unlock the fob. Most of the time, you can perform this with with your fingernail, but a flathead screwdriver can be required. Apply light pressure in a few places all around the fob to ensure that you don’t damage it when you carefully pry the fob apart.
To see the battery, you might have to lift out the circuit board. Check the battery code at this moment. Your key will only operate with a battery that has that code on it, and it will begin with a two-letter prefix such as CR (see the illustration below).
If you’re not sure of a battery’s identity, don’t use it because a strong battery could cause leakage and harm the key fob. The battery life of your car key won’t be extended by switching to a more powerful battery, as some people believe.
After removing the old battery, clip the two pieces of the fob back together and replace it with the new one.
How do I reprogramme my key fob now that the battery has been changed?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
How is a BMW key fob with push-button start programmed?
While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
Will Mykey reset if the battery is disconnected?
Sadly, there isn’t a simple solution to this question because it much depends on the brand and type of your car. But you might be able to reset the key fob by briefly disconnecting and reconnecting your car’s battery.
Should I reprogramme my car after changing the battery?
No, usually you don’t need to reprogramme your car following a battery change. But if your vehicle has an onboard computer, you might need to reset it.
In addition, This implies that you are not need to purchase a BMW battery if your car’s battery has to be replaced and any replacement battery that fits your car will work. The car’s computer will automatically alter the charging procedure if you purchase a BMW battery, though, to ensure the battery lasts as long as possible.
Can a key fob be programmed without visiting the dealership?
Can a key fob be programmed without visiting the dealership? Yes, you can program the key fob’s locking and unlocking features without visiting the dealership. However, you might need to visit the dealership or a locksmith if you need to program the transponder in order to be able to start the car with the key.
Suppose my key fob breaks?
My car’s key fob seems to be coming in and going out, though. I know I merely need to replace the battery, but I don’t have much free time. What if the key fob entirely fails while I’m operating the vehicle?
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
If time is of the essence, you should be aware that changing the battery in your key fob just requires two minutes, albeit you will need to visit a general store or pharmacy to obtain the battery.
Why not change the battery in your car insurance at the same time as you replace the one in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.