The battery in your BMW key is a CR2032. The old BMW key fob battery should be carefully removed, and the new one should be gently inserted after that. You’ll quickly be back on Johns Creek roads after this.
In This Article...
How much does a new BMW key battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
Do you need to reconfigure your BMW key fob after changing the battery?
BMW Key Fob Battery Replacement Programming a New BMW Key from Scratch Programming a new BMW key is typically quick and painless. When the key fob first gets to your home near Decatur or Pekin, you’ll still need to program it.
What kind of battery is required for a BMW key fob?
A CR2032 battery is necessary for BMW key fob battery replacement for drivers who have BMW Comfort Access. To replace the battery in your BMW key fob, follow these steps: Remove the metal valet key by pushing in the little tab on the side of your key fob.
How do I make my BMW key work?
Take the BMW key fob you want to configure, hold down the unlock button, and then press and hold the BMW logo three times. The doors should lock and unlock once more. When this occurs, you are ready to go! You’ve set up your BMW key fob.
What occurs if the battery in your BMW key dies?
You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.
Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.
Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.
How can I reset my key now that my battery is new?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.
Can BMW keys have their programming changed?
How Can I Set Up My BMW Key Fob? Your BMW’s key fob and keyless entry system simplify and improve convenience. So it may be a real bummer when they malfunction or need to be reprogrammed. Fortunately, if you know what to do, which we do, setting the keyless entry system in your BMW key fob is simple.
How is a 2011 BMW key fob programmed?
3. After removing the ignition key, press and hold the unlock button for 15 seconds. Then, within a 5-second interval, press the key lock button three times.
4. Let go of the buttons.
5. Doors will lock and unlock to demonstrate that proper programming has taken place.
Approach 2:
One key that is already programmed and one key that needs to be programmed are required for this procedure.
1) Enter and lock every door.
2) Start the ignition and swiftly turn it off. Start the process now (no more than 5 seconds). 30 seconds must pass before the next action is taken.
3. Take out the first key.
4) To put the key closer to the antenna on the remote receiver, hold it up towards your left shoulder.
5) Press the lock button three times while keeping the unlock button depressed. As soon as the unlock button is released, the doors lock to authenticate the procedure.
6) Quickly carry out steps 4 and 5 for key #2 and so forth.
If that doesn’t work, try pressing the keys in reverse. vs. 1 then 2, key 2 then key 1
Approach 3:
1. Quickly turn the key to position 1 five times. 2. Take out the key. 3. Hold the unlock button while pressing the lock button three times.
4. Within 30 seconds, press the same button if you have another key. 5. To complete, turn on the ignition.
PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip used by the immobilizer (which prevents the automobile from starting) cannot be programmed; this must be done by a professional.
PLEASE NOTE: This programming process modifies the key’s remote control component. Any transponder chip used by the immobilizer (which prevents the automobile from starting) cannot be programmed; this must be done by a professional. You must use diagnostic tools to have your remote configured to your vehicle at your neighborhood dealer or locksmith.
Want a professional to configure the remote for you since you’re having problems doing it yourself? Find a qualified key fob installer in your neighborhood by typing your city or zip code in the search box below.
Was this Knowledgeable? Please consider making a gift of any kind to support this blog! Your contributions aid in the upkeep of this website. We appreciate your visit and donation.
What does the BMW key’s diamond button do?
Does anyone have any knowledge of what the key fob’s diamond button is meant to do?
The included manual is incredibly succinct. It refers to a “Headlight courtesy delay feature,” although it’s not entirely clear what this feature performs. “If the standby state is switched on and the high-beam headlights are enabled, the low-beam headlights remain on for an of time,” the text states. Even if “… for a period of time” is meant to be “… for a length of time,” that still doesn’t adequately describe what this feature is.
According to the description, it can only be used when the automobile has just been turned off and the high beams are on. However, when the car is locked, the button appears to have some effect. The inside lights occasionally come on. Sometimes the headlights switch on. It is quite unpredictable and challenging to duplicate.
What experiences do others have? Has anyone figured out what this button’s actual purpose is?
It is unfortunate that it cannot be set to perform things like open the windows or sunroof, switch on the heating, or other things!
Mine has two options (330e in Belgium): turn on the lights in the house or turn on the air conditioning. In the options for the car, I can select the default function.
It briefly illuminates the headlights in my automobile. Excellent for illuminating the path to your front entrance or finding your car at night in a big parking lot.
Check the “Home lights” setting under “Exterior Light Settings” on your iDrive to make sure it is not set to 0 seconds.
My headlights now turn on for 10 seconds when I hold the diamond button on the key because I set mine to that duration (G20 330i).
Do BMW keys require programming?
Key fobs that have been activated as detailed above can only open your car manually and cannot be used with the Comfort Access feature in E Series BMWs and MINIs.
It is important to code your car to erase the old key profile and set the new key for Comfort Access use in order to activate your new key fob for use with Comfort Access. This can be done at your neighborhood BMW/MINI dealership or we can remotely code it for you.
Our touchscreen key fobs for BMWs from the G Series don’t need to be programmed to function with your particular BMW.
How can I sync my BMW key fob again?
Steps for Programming a New BMW Key Fob After then, remove your key from the ignition. While keeping the unlock button depressed, press the BMW logo three times on your BMW key fob. After pressing the BMW logo three times, release the unlock button. Once the ignition is turned on, your new key should be associated with your BMW.
What occurs when the battery in your key fob runs low?
The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. When a smart key fob is in your pocket or handbag for automobiles with push-button starts, the car might not always detect it if the battery is low.
How can I tell if the battery on my key fob is running low?
When the battery in the fob gets weaker, the transmitter’s range decreases. Your range is deteriorating if you find that you need to be much closer to your automobile than usual. This serves as a reminder to replace your battery. Other signs comprise:
- If your key doesn’t signal at all
- If you have to click the button several times before your car responds
- If your key remote behaves erratically or inconsistently
Will Mykey reset if the battery is disconnected?
Sadly, there isn’t a simple solution to this question because it much depends on the brand and type of your car. But you might be able to reset the key fob by briefly disconnecting and reconnecting your car’s battery.
Should I reprogramme my car after changing the battery?
No, usually you don’t need to reprogramme your car following a battery change. But if your vehicle has an onboard computer, you might need to reset it.
In addition, This implies that you are not need to purchase a BMW battery if your car’s battery has to be replaced and any replacement battery that fits your car will work. The car’s computer will automatically alter the charging procedure if you purchase a BMW battery, though, to ensure the battery lasts as long as possible.