response given by
That seems annoying. Fortunately, replacing the battery in a key fob for a BMW 328i is not too difficult. Here’s how to go about it:
- Start by pressing and holding the little button at the key fob’s base. You can do this to take the metal key off of your key fob.
- Find a small hole by feeling around the key fob’s edge. Use your metal key or a small flathead screwdriver to remove the key fob’s back plate off.
- Remove the old battery with care. You must orient your new battery in the same direction as your old one, so be sure to take note of where the negative and positive terminals are located.
- Put the key fob’s fresh battery in there. As you do this, try to avoid touching the terminals because doing so could shorten the key’s battery life.
- Replace the back panel last. The two parts should click together when they are joined properly. After that, you may test out your new key fob batteries by inserting the metal key.
Why not use the extra time to explore your options for auto insurance using the Jerry app while you’re changing the battery in your car remote? Simply download the app, respond to a few short questions, and you’ll see a list of affordable estimates from companies like Nationwide and Safeco.
In This Article...
How much power does a BMW 328i key fob require?
The battery in your BMW key is a CR2032. the old BMW key fob batteries with care, then gently insert the new one after removing the key fob cover.
Why won’t my BMW key fob function now that the battery has been changed?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
Which battery type should I use in my BMW key fob?
A CR2032 battery is necessary for BMW key fob battery replacement for drivers who have BMW Comfort Access. To replace the battery in your BMW key fob, follow these steps: Remove the metal valet key by pushing in the little tab on the side of your key fob.
Do you need to reconfigure your BMW key fob after changing the battery?
BMW Key Fob Battery Replacement Programming a New BMW Key from Scratch Programming a new BMW key is typically quick and painless. When the key fob first gets to your home near Decatur or Pekin, you’ll still need to program it.
How is a key fob for a 2009 BMW 328i programmed?
BMW key fob should be taken out of the ignition. Press the lock button (the BMW logo) three times while still holding down the unlock button, and then let go. If you need to program more than one key fob, go back to step 3 within 30 seconds following the first key programming. Activate the ignition.
I changed the battery in my key fob; how can I get it to function again?
If the regular program sequence didn’t work for your automobile after trying it, try this alternative one:
Pull remove the key after inserting it into the ignition. Repeat this six times in no more than 10 seconds.
If your car operates in this order, both your interior and outside lights will flash.
You should get in touch with an authorized dealer or another independent company that has experience working specifically with the make and model of your car if neither the standard nor alternative reprogramming sequences were successful.
How much does a new BMW key fob battery cost?
I recently visited the business. The key fob wouldn’t work to lock or unlock my car when I tried. My BMW key fob’s battery has to be changed.
In less than two minutes, find out if your auto insurance is being overcharged.
Batteries for key fobs typically last three to four years. Your current BMW key fob might need to be replaced, depending on the model.
You should replace the battery in your smart key or Comfort Access BMW key fob by following these simple instructions:
- Get a CR2032 battery from a department or auto store. It will cost you around $2 to buy it.
- By depressing the tab on your key fob, you can take the valet key off.
- To pry open your battery cover, use the key or a flathead screwdriver.
- Replace the old battery with the new one after removing the old one.
- Restore the key to its housing and close your key fob.
You have a non-comfort access key fob if you are unable to open it because it has an indent in the side. You must take a long drive to recharge your key fob battery because it can only be done through the ignition of your automobile.
Once the battery has been successfully replaced or recharged, make sure to test it by locking and unlocking the doors several times. To find out how much you can save on your auto insurance before you leave again, take a moment to glance at the Jerry app.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy.
Can I change the battery in my BMW key myself?
Although the battery in this key is not intended to be changed, it can be done by cutting the casing apart and soldering a new battery. You’ll need a VL2020 battery to swap out this BMW key battery. The manufacturer does not advise performing this operation.
How does a BMW key fob start?
Does my car have to be within range for my key fob to operate the remote engine start feature? You can activate Remote Engine Start by pointing your BMW key fob at your car and pressing the lock button (the BMW Roundel) three times in a row.
Is a BMW key fob reprogrammable?
Take the BMW key fob you want to configure, hold down the unlock button, and then press and hold the BMW logo three times. The doors should lock and unlock once more. When this occurs, you are ready to go! You’ve set up your BMW key fob.
How can I tell if the battery in my key fob needs to be changed?
When the battery in the fob gets weaker, the transmitter’s range decreases. Your range is deteriorating if you find that you need to be much closer to your automobile than usual. This serves as a reminder to replace your battery. Other signs comprise:
- If your key doesn’t signal at all
- If you have to click the button several times before your car responds
- If your key remote behaves erratically or inconsistently
What occurs when the battery in your key fob runs low?
The transmitter’s range decreases as the fob battery gets weaker. This implies that for the key fob to operate, you must be close to the vehicle. When a smart key fob is in your pocket or handbag for automobiles with push-button starts, the car might not always detect it if the battery is low.
What occurs if your BMW key fob malfunctions?
You won’t be able to use keyless entry or remote unlocking if your BMW has Comfort Access if the battery in your key fob has died. You can still enter and manually start your automobile, though.
Press and hold the key release button at the remote fob’s base while unlocking the door of your car, then slide out the internal key blade. This can be used in place of a standard key to unlock your car. You can locate a little hole on the bottom of the handle if the keyhole is hidden on your car door. Use the key blade to pry off the trim panel and expose the keyhole by inserting it into the hole.
Once you’re inside, put your remote key fob in the ignition slot or, if your car doesn’t have one, press it up against the steering column’s key markings. If your key fob dies, you will still be able to start your BMW using the start/stop button on the dashboard.
The cost of a BMW key fob
The price of a 2020 Toyota Sienna fob was comparable. Dealers, however, gave prices as low as $150 to replace a key fob for a 2017 Honda Accord. A number of BMW retailers claimed that the additional security features built into the 2020 X5 key fob justifies the roughly $500 they spend to replace and program one.
What does a BMW key’s diamond button do?
Does anyone have any knowledge of what the key fob’s diamond button is meant to do?
The included manual is incredibly succinct. It refers to a “Headlight courtesy delay feature,” although it’s not entirely clear what this feature performs. “If the standby state is switched on and the high-beam headlights are enabled, the low-beam headlights remain on for an of time,” the text states. Even if “… for a period of time” is meant to be “… for a length of time,” that still doesn’t adequately describe what this feature is.
According to the description, it can only be used when the automobile has just been turned off and the high beams are on. However, when the car is locked, the button appears to have some effect. The inside lights occasionally come on. The headlights occasionally come on. It is quite unpredictable and challenging to duplicate.
What experiences do others have? Has anyone figured out what this button’s actual purpose is?
It is unfortunate that it cannot be set to perform things like open the windows or sunroof, switch on the heating, or other things!
Mine has two options (330e in Belgium): turn on the lights in the house or turn on the air conditioning. In the options for the car, I can select the default function.
It briefly illuminates the headlights in my automobile. Excellent for illuminating the path to your front entrance or finding your car at night in a big parking lot.
Check the “Home lights” setting under “Exterior Light Settings” on your iDrive to make sure it is not set to 0 seconds.
My headlights now turn on for 10 seconds when I hold the diamond button on the key because I set mine to that duration (G20 330i).