I just received my m40i yesterday from the dealer, and I’m extremely happy with it so far. I just realized the front license plate mount wasn’t installed by the dealer, and I’m wondering how to fix it. I looked at the front bumper and couldn’t see any attachment holes.
I need to place the two plastic “tabs” on the mount’s bottom into the gap between the radar sensor and main bumper, according to an inspection of the plastic mount that the dealer placed in the trunk. The seam between the main bumper and the plastic piece above it then appears to require the insertion of two top screws. My primary concern is that it appears that there are no holes in the screws; this would undoubtedly result in some small damage.
Is this accurate? I can probably take it to the dealer when the license plates come in from the DMV next week, but I’d want to mount it myself if I can. I looked in the manual, but the index didn’t include front plate installation.
If you don’t mind their drilling holes in the bumper for it, the dealer will mount it for you. The US Millworks and the STO N SHO, which mount under the bumper and both have options for a quick-release mount so you can easily remove the plate for photos, car shows, washing the car, etc., and mount it for everyday driving so you don’t get cited, are two options that a lot of people on the forums are looking at.
In This Article...
Re: Where should I mount the Fong license plate bracket?
Usually, the front storage section contains the screws and other items. It should be fairly evident once you see them, or you may wait till Monday and call the dealer; they should be able to point you in the right direction. I picked up my own with temporary plates still on, so I can’t really say how it was put.
For the record, the German license plates on my last automobile in Munich were secured using double-sided foam tape. There would be no holes at all because some of the material is utilized to hold trim in place and is regarded as “permanent”. I’m not sure how difficult it was to remove from the front or back because they did it for me before delivery. The plates are a memento of my trip.
How is the front license plate hole made?
- Make a note of it. From your license plate center, measure 5.3 inches to the left and 2.375 inches to the top.
- Follow suit. The only difference is that you should only move 5.3″ vertically and 2.375″ horizontally from the center.
- Apply a drill.
- Complete
Which screws are required for the front license plate?
Knowing the size of your license plate screw is important since it will enable you to buy the appropriate one when you need one. Many automobiles’ standard license plate screws are 1/4-14-3/4-inch self-tapping screws, which are particularly suited to those with plastic or nylon screw retainers.
What if, in Texas, my car lacks a front license plate holder?
How many license plates must your car have to abide with Texas law? Is there a one-plate requirement or a two-plate limit? Should you make holes in your car’s front bumper to attach a front license plate, or will a rear plate suffice? You may have done a thorough Google search on license plate laws if you are reading this essay out of frustration. Learn what the Texas Transportation Code says about license plates and how it affects you as a driver in Texas.
In Texas, do I require a front license plate? Yes. According to Texas law, every car must have license plates on the front and back of it. Texas currently levies a $200.00 punishment for failing to display a front license plate.
Can I mount my front license plate on the dashboard in Texas?
There are laws to keep you safe whether you are traveling on the interstate or parking to pick up a passenger. However, rumors could impair your judgment.
Will sent us the initial email. Is it against the law in Texas for automobiles and trucks to only use the center lane on the freeway? he enquired.
“The general flow of traffic allows for movement in either lane, the inside middle or the right lane. They are not required by law to just use the middle lane, “said Sgt. Standifer.
How about stopping in a travel lane, though? Is it legal for an Uber or Lyft to park and wait in the lane on the main road to wait for passengers? Belinda questioned the VERIFY team.
Texas Transportation Code 545, which regulates halting, standing, or parking in specific locations, is our source for this one.
A vehicle parked at the curb of a street, a junction, or a crosswalk cannot have its operator park on the roadway side, according to the legislation. A passenger or some goods must be picked up or dropped off “immediately.”
Therefore, the position and amount of time that a vehicle is halted determine whether or not parking in a travel lane is permitted.
Deborah, a happy new-car owner, wrote to the VERIFY team with the following: “The front of it lacks a license plate. According to what I’ve been told, individuals no longer place them at the front of some vehicles, and police no longer pay attention to it.”
“You must have a license plate on both the front and rear of the car in the state of Texas.”
Many individuals have it there because they don’t want to drill holes in the front bumper, but since it’s not there, law enforcement has a good reason to pull them over.
You may also receive a citation if the Texas state motto or any other letters are obscured or cut off by your license plate frame, Sgt. Sandifer says.
Which screw size secures a license plate?
There are a few common screw sizes that are employed by the auto industry. The first is the 1/4″ – 14″ – 3/4″ self-tapping screw, which has a head that may accommodate a small-size socket or a flathead screwdriver. The majority of domestic automakers also utilize them for the rear, while they are commonly employed for the front plate.
The other are the M5 and M6 metric screws, which have threads that are 5mm or 6mm, respectively. The usual thread length ranges from 10mm to 16mm, depending on the manufacturer and application. Whether or not you use a license plate holder will determine how much thread you require. The screw must typically be 16mm long if it needs to pass through both the plate and the holder.
Driving without a front license plate is possible.
In the UK, it is illegal for cars to have no front license plate. Every vehicle on the road must have its registration visible from the front and the back. The front number plate must be white with black index marks that are easily seen. On a yellow plate, the rear plate must also have black lettering and numbers. For better visibility in low light, reflective material must be used for both the front and back plates. By observing the reflective plate and identifying whether the car is towards you or away from you, it is possible to distinguish between the front and the back of a vehicle thanks to the practicality of this law. This makes it easier to navigate, particularly at night when a car might not be operating or have lights on.
Motorcycle license plates are governed by rules that are considerably different. Any motorcycle that was registered on or after September 1st, 2001, may not have its registration shown up front. A single registration plate that looks like the ones used on cars and has black characters on a yellow reflective plate is required to be visible at the back.
Older cars made before September 1, 2001, are allowed but not legally compelled to display a plate in front.
Can you attach a license plate to Velcro?
To answer your concern, the Velcro WILL hold up quite fine. However, if you ever want to detach the component from the paintwork again, there may be a problem. The clearbra, though, would fall off in its place, so it wouldn’t be an issue if you had one.
How are license plates attached without screws?
- Use of VELCRO(r) Brand Heavy Duty Tape is by far the simplest method for attaching a new license plate to your vehicle.
- To begin, make sure that both the rear of the license plate and your car are clean, dry, and ready to receive the VELCRO(r) Brand Heavy Duty Tape.
In California, is a front license plate required?
You might be asking, “Do I need a front license plate in California,” as you prepare to drive your new vehicle on the streets of Los Angeles. Yes, it is the answer. Although some motorists prefer the streamlined appearance of a vehicle without a license plate, driving legally in California requires both a front and rear license plate.
Utah: Is a front license plate required?
According to Utah law, all registered vehicles in the state—aside from motorcycles, trailers, and semitrailers—must have license plates that are firmly fastened to the front and back of the vehicle.
Can I be stopped in Texas for having no front license plate?
Because Texas is a two-plate state, all vehicles must have a license plate on the front and the back. If you don’t have a front license plate, an officer has good reason to pull you over at any moment, and you risk getting a ticket for failing to display your license plate.
But if you go anyplace in Texas, you will notice a ton of cars without front license plates; these cars may drive right by a police officer without being stopped. Many automakers don’t even provide pre-installed brackets for front license plates, let alone a comfortable place to put them. Similar to this, it’s unusual that cars bought in other jurisdictions have front license plates.
So, if you don’t already have one, should you go out and purchase one right away? The practical response is “it depends,” even though the legal response is “yes.”
I have only been stopped once in the past five years for driving without a front license plate, and I was given a warning before being released. Having said that, I would ask to be stopped if I drove that automobile through high-crime areas or if I returned in it after having a few drinks in the evening. Get a front license plate without a doubt if you don’t want to give the cops a good reason to stop you at any time.
You might decide that observing this particular legislation is not for you if your fast Italian sports car, which you only drive on Sundays, lacks a front license plate and you don’t want to damage the front end of your vehicle. Let’s face it, you’re more likely to be stopped for speeding in that vehicle.
Just remember that driving without a front license plate is illegal and that you could be pulled over and issued a citation for it. The last thing you want to happen is to get pulled over for driving without a front license plate, have the cop say they smell marijuana, search you, find evidence that leads to an arrest, and then get pulled over again. Have a front license plate if there is even a remote chance that you, a passenger, or your car shouldn’t be searched.