To identify the right wheels for your vehicle, use this tool to sort wheels by bolt pattern.
Honda: All non-sport ATVs and SxSs, save the Pioneer 1000 and Talon, are 4/110. The bolt pattern is 4/137.
With the exception of the 2019 YXZ, which has a 4/156 bolt pattern, all non-sport and contemporary ATVs and SxSs employ a 4/110 bolt pattern.
In This Article...
A Honda Pioneer has what kind of bolt configuration?
Starting with the bolt configuration, the Honda Pioneer 500 and Honda Pioneer 700 both have a 4×110 bolt pattern, while the Honda Pioneer 1000 has a 4×137 bolt configuration. The Honda Pioneer 1000 comes standard with larger tires, and with more spinning mass comes the requirement for additional strength to manage the additional forces at play. This difference in pitch circle diameter (PCD) makes sense. The Honda Pioneer 1000 employs a different bolt pattern than its less potent brothers, although all Pioneer models use the same lug nut size, which is 12mm with a 1.5 thread pitch.
The Honda Pioneer lineup’s stock rim size is the same across all models, with 12 being the norm, just like the lug nut size. In contrast to other side-by-side manufacturers that like to stagger the wheel width, Honda Pioneer cars’ standard rims are both 7 inches wide. And although the Honda Pioneer 700 and Honda Pioneer 500 have identical front and rear wheel offsets (5+2 in both the front and back), the basic Honda Pioneer 1000 has a staggered offset (5+2 in the front, 5+3 in the rear).
The stock Honda Pioneer tires are narrower in the front than they are in the back, just like other UTV manufacturers. The front and rear tires of the stock Honda Pioneer 1000 measure 27 inches by 9 inches and 11 inches, respectively. The stock tires on the Honda Pioneer 700, which has less horsepower, are smaller, measuring 25 inches in front and 25 inches in back, respectively. The stock Honda Pioneer 500 tires, which have the same front and rear width as the Honda Pioneer 700 and are an inch shorter in height (at 24 inches) than the Honda Pioneer 700, continue in this pattern (at 8 inches and 10 inches respectively).
Can I install what size tires on a Honda Pioneer 1000?
We have everything you need if you need a little more space for larger tires. With our 3 lift kit and our Front and Rear 1.5 Offset High Clearance A-Arms, you have space for 30 tires. They are also as simple to install. After breakfast, if you start installing everything, you’ll be eating lunch out on the trail. The following four key benefits of these A-arms:
Because of its high clearance, you may easily roll over debris that would otherwise damage your suspension. So you can bike straight over a rough stretch of road without worrying about it denting up your arms.
You get a 3 longer wheelbase thanks to the 1.5 offset on the front and rear wheels. With additional stability and a smoother ride provided by a longer wheelbase, climbing hills and other inclines will be simpler. Additionally, the 1.5 offset offers you space for larger tires. With just these A-arms, 28 tires can fit. You can fit a monster 30 tire if you install them with a 3 lift kit.
You don’t have to worry about pushing them too hard because they have a lifetime warranty in addition to all that.
Is there a standard bolt pattern for ATVs?
You should measure the bolt pattern on both the front and back of your ATV. You should double check your ATV model’s bolt pattern before buying new wheels because some ATV models have different bolt patterns on the front and back.
Will a Honda Pioneer 1000 fit 29-inch tires?
The two inquiries “What is the largest and/or tallest tire that will fit on the 2016 Honda Pioneer 1000 & 1000-5 without a lift kit? and “When will the aftermarket parts companies release a lift kit for the Pioneer 1000 & 1000-5” are currently the two most often asked on the Internet.
Without a raise kit, the largest tire that can fit on a Pioneer 1000 is between 29 and 30, depending on how big the lugs are and how accurately the tires fit. Since the 1000 has only been in customers’ hands for a few months, many folks on some of the Honda Pioneer side by side forums have tried wedging different brands, sizes, etc. since it’s all trial and error. Where the tire strikes the fender-well is where we have clearance issues rather than height. The benefit of having arching forward control arms also applies in this situation.
Wheel offset for the Honda Talon?
Both Talons have 15-inch wheels that are 8 inches wide in the back and 6.5 inches wide up front. The rear wheels have a 33mm offset.
How reliable are Pioneer tires?
What quality are Tri-Ace Pioneer M/T tires? Yes, drivers of Jeeps, light trucks, and SUVs who require a cheap tire that is designed to perform in mud, dirt, rocks, and other off-road terrains can consider Tri-Ace Pioneer M/T tires.
Are wheels made by Honda and Yamaha interchangeable?
Finally, the main event! We recently learnt about various bolt patterns and how to correctly measure them. Now that we have that settled, let’s address the question in the title: Do Yamaha and Honda Use the Same Bolt Pattern? The quick response is yes, they do. Most Yamaha ATVs and Honda vehicles follow the well-liked 4/110 pattern. So go ahead and evaluate the pattern of your ride.
It’s a match made in heaven if it is a 4/110 and goes with the wheels you wish to purchase! However, I want to emphasize one more that not all Hondas and Yamahas use the 4/110 pattern. This is particularly true for some earlier models, from a time when both brands experimented heavily with wheels, lugs, studs, and everything in between. However, you won’t often need to worry about any of that.
This is crucial: if there is a beautiful wheel out there that is reasonably priced but does not fit the hub on your Yamaha ATV, there is a fix. It’s referred to as an adaptor ring, and after you attach it to the hub, the pattern changes to fit that wheel.
What does a bolt pattern of 4×110 mean?
The stud count (four) and bolt circle measurement (110), the notional circle determined by the studs’ centers, make up the 4×110 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Daihatsu, Mazda, Perodua, and Toyota all have the 4×110 bolt pattern. The following is a complete list of car makes and models:
What is the Kawasaki mule’s bolt pattern?
The bolt pattern on the standard Kawasaki Mule is 4/137. The Kawasaki Mule Pro-Fxt, however, features a 4×156 bolt pattern. Although 4×156 bolt patterns are utilized by UTVs like the Polaris Ranger and RZR, each manufacturer has a distinct lug pitch. Polaris lugs are made with a 1.50 thread twist, while Kawasaki Mule lug nuts are 12mm x 1.25 (the second number indicates the thread pitch). For those wanting to purchase a spare Kawasaki Mule tire or rim, being aware of this information is essential; you don’t want to end up having to install wheel adapters if your new rims don’t align.
In terms of the stock Kawasaki Mule tire and rim sizes, the majority of Mules have 23 by 11 tires and 10 wheels. Despite this, some of the more recent Mule models have larger factory-installed tires and rims, with wider tires in the back and narrower tires up front. For instance, the Kawasaki Mule Pro-Fxt and Mule MX Pro both have 12 wheels as standard. Additionally, you can normally use tires up to 27 or 28 inches in diameter before things start to rub. If you need more space, you’ll either need a lift kit or offset a-arms.
The offset of your factory Kawasaki Mule tires / wheels is another crucial measurement to understand, along with tire / rim size and the distance between the bolt holes on the wheel. An aftermarket Kawasaki Mule wheel with a 5+2 offset is as close to stock as you can get. Running a 4+3 offset will put the wheels roughly an inch or two outside the fenders, giving you a wider stance. Therefore, your tire tread will be around 2 or more outside the fenders if you have a 10 wide tire and a 7 wide wheel with a 4+3 offset. Although this will undoubtedly increase your stability, additional muck will also be thrown up and into the cabin. Therefore, longer fender flares are strongly encouraged for individuals who decide to change the stock Kawasaki Mule wheel offsets!
Maintaining a constant wheel width is often a good idea when mounting aftermarket Kawasaki Mule wheels. The sidewalls of each tire will stretch out awkwardly if you mount them on rims of different sizes, which can result in each tire-wheel set having a different height. Additionally, it will be challenging to seat them if the rim size is too wide for the tire.
How is a four lug bolt pattern measured?
A 4-bolt pattern is measured from center to center of two bolt holes that are placed exactly across from one another. Given that the bolt holes are not exactly across from one another, 5-bolt patterns can be more challenging to measure.
A 4×4 bolt pattern: what is it?
4×4 bolt pattern What vehicles have a bolt pattern for a 4×4? The stud count (4) and bolt circle measurement (4), the notional circle determined by the studs’ centers, make up the 4×4 Bolt Pattern or Pitch Circle Diameter (PCD). MG, MINI, and Pontiac automobiles all share the 4×4 bolt pattern.