Similar to Walt, you must “measure down” using the filler located at the engine wall and windshield in the back of the engine compartment.
In This Article...
White Coupe, Walt
So, the following is what I discovered from the identical post I made on another BMW Forum:
Walt, this is a fascinating subject. According to the information on the newtis.info website, coolant is poured through the opening at the back of the engine bay for the N63 b40 and b44. To find out how much, go to the illustration and text below:
Only for N63 B40/B44 O 1:
the coolant filler neck’s upper edge. When necessary, use a tape measure.
However, if you’re interested in learning more about the “vacuum coolant fill” method that BMW uses for this engine, see this website: https://www.newtis.info/tisv2/a/en/f…check/1LIw3FH0
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.
a group of BMW owners and enthusiasts on a forum. Come participate in the debate regarding Bimmerfest activities, production figures, performance, customizations, classified ads, troubleshooting, maintenance, and more! bringing together the BMW community.
What sort of coolant is suitable for my BMW?
No matter what type of car you drive, whether it’s a BMW, Porsche, Mercedes Benz, Audi, Mini, or Volkswagen, your car circulates a solution of water and coolant to dissipate the heat generated within the engine and prevent it from completely melting down (one notable exception are older Porsche models that are air and oil cooled and did not use water or coolant, but instead circulated a large amount of oil to dissipate the heat).
A Spectrum of Colors
Which coolant type is best for your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen out of the many available options? The answer is the kind that was initially installed in your car. Your coolant may be green, pink, blue, yellow, or even clear depending on the manufacturer. All coolants are naturally transparent, and dye is used to give them color. It has no impact on the coolant’s chemical properties that each producer adds their own colour blend. Because the water in Europe is substantially harder than the water in the United States, European manufacturers prefer coolant that is phosphate-free.
Inorganic Acid Technology (IAT), Organic Acid Technology (OAT), and Hybrid Organic Acid Technology (HOAT) are the three most common coolant types available today. A HOAT coolant is used by your BMW, Porsche, Mercedes Benz, Audi, or Volkswagen.
In order to protect aluminum surfaces, silicate is added to OAT coolants to create HOAT coolants. The cylinder heads and radiators, as well as other parts of your BMW, Mercedes Benz, Porsche, Audi, and Volkswagen engine and cooling systems, are constructed of aluminum.
Silicate and phosphate corrosion inhibitors are not used in OAT coolants. These coolants are made to last for 150,000 miles and have a long service life (or 5 years). It should be mentioned, nevertheless, that German Auto Center and the majority of manufacturers advise cleansing or replacing the coolant every two years.
The metal (Iron) components of the engine and cooling system are protected by traditional coolants, which are IAT coolants and use silicate and phosphate corrosion inhibitors. IAT coolants shouldn’t be utilized because the majority of the iron components in your BMW, Mercedes Benz, Porsche, Mini, Audi, and Volkswagen have been replaced with aluminum and other lighter composites.
It’s crucial to keep in mind that modern German performance cars, whether you drive a Porsche, Mercedes Benz, Mini BMW, Volkswagen, or Audi, will last you for many miles and years if you maintain them properly. German Auto Center in Austin is the place to go for German auto repairs. We will be pleased to help you!
In a BMW, where is the coolant located?
Find the coolant reservoir by opening the hood. This tiny black tank is typically located to the left of the engine in BMW models, but it isn’t always the case. If you’re unsure of what to look for, double-check your owner’s manual. Turn the cap slowly counterclockwise to gradually remove the extra pressure.
Does my BMW need to use that blue coolant?
The majority of coolant manufacturers in East Texas, where we can experience a wide variety of temperature variations throughout the year, offer an engine coolant that is a 50/50 combination.
In order to receive the greatest cooling benefits for our Texas climate, BMW “Blue Coolant” must be mixed and added to your cooling system in the right manner. This calls for a coolant flush and refill procedure that removes air and old coolant from your system to improve engine safety.
Because it is silicate and phosphate free and has a far longer lifespan inside of your car’s cooling system, we advise using BMW “Blue” coolant in your vehicle.
Come in right away to pick up a gallon of fuel, or let us repair the cooling system in your car in time for the Texas heat.
Can I fill my BMW on my own with coolant?
I normally have my technician add more coolant to my BMW when I get my car serviced, but there doesn’t seem to be anything else wrong with my car. I’m not interested in taking the car in to obtain more coolant. Is there a way for me to refill the coolant on my own?
In less than two minutes, find out if your auto insurance is being overcharged.
Your car’s coolant can be filled on your own, yes. You will require the following supplies to refill the coolant in your BMW:
- according to the instructions in your manual, a fresh bottle of coolant
- the funnel
- One set of gloves
To top off the coolant in your BMW, complete the following steps after gathering the necessary materials:
- Identify the coolant tank by opening the hood. If your automobile is hot and you just switched it off, don’t touch anything there.
- While pressing downward, rotate the cap in the other direction.
- When the cap is removed, a brightly colored stick or level float ought should be visible. If the coolant tank is properly filled, a schematic showing the level float’s location will be located anywhere on the tank.
- Place the funnel in the tank, leaving enough room for the level float to be visible.
- Until the float reaches the appropriate height as shown by the diagram, begin adding coolant.
- Replace the cap after carefully removing the funnel.
Knowing the requirements for and workings of your car’s maintenance is always a smart idea. Making ensuring you have the finest auto insurance coverage for your vehicle is equally crucial. You can make sure you have excellent coverage at the most affordable pricing with the Jerry app.
After you download Jerry, all you have to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
Is water need to be added to BMW coolant?
To make the best coolant, they must be mixed. You can purchase antifreeze that is full strength and needs to be diluted with distilled water before being applied to the engine system, or you can purchase ready-made combinations of coolant that already have water added.
Why does my BMW’s coolant gauge show low when it is full?
If the low coolant indicator on your dashboard illuminates, your car may be having one of the following problems:
- The most frequent reason for the coolant light on your car to come on is that the coolant is low. While it’s possible that the car is just short on coolant, it’s more likely that it has another problem that’s causing it to gradually lose coolant over time. You should have your car checked out and serviced if this is the case.
- Faulty Sensor: Your vehicle needs a sensor that measures the amount of coolant in its engine in order to know when the coolant level is low. When the coolant level drops too low, a floating sensor in the coolant reservoir of the majority of automobiles activates, putting on the warning light.
Your vehicle’s coolant sensor may be broken if you check your coolant reservoir and it looks to be full but your low coolant signal is on. The majority of auto repair businesses are able to identify and replace faulty sensors.
Can BMW use Prestone coolant?
Yes. OAT coolant/antifreeze Prestone also has anti-corrosion components to safeguard your cooling system. It works well in all vehicles, provides the same levels of security, and causes no harm.
Why is blue coolant used by BMW?
To maintain your cooling system operating at its peak, use only German OEM engine antifreeze, component number 82141467704. (82 14 1 467 704). Because they don’t include nitrites, amines, phosphates, or borates, BMW exclusively suggests specific coolants. BMW cooling systems typically do not work with off-the-shelf coolant from a neighborhood parts store, and mixing various coolant formulas is not advised (in a pinch you should use distilled water).
The well-known blue coolant, which has been in use since the 1990s, is only permitted for vehicles with model years up to 2018. Internally, it is referred to as the G48 formula and is exclusive to BMW/MINI vehicles. In comparison to other forms of coolant, the blue coolant formula is a hybrid that extends coolant service life and is less harmful to the environment. On vehicles manufactured in 2018 and later, BMW replaced it with a new formulation that contains silicate and offers superior immediate corrosion protection. BMW does not advise using the older blue formula for vehicles created after January 2018.
For increased corrosion resistance, anti-freeze defense, and water pump lubrication in street cars, we advise combining distilled water in a 1:1 ratio with the mixture. Reduce the amount of antifreeze in your coolant mixture if you want more cooling properties, but only in warmer climates where freezing is impossible (see chart below). We advise monitoring the freezing point of the coolant mixture if you want to use antifreeze and water ratios other than 1:1.
Red Line Water Wetter can also be added if high temperatures could lead to engine banging or pre-ignition.
- BMW # 82141467704, genuine German OEM antifreeze
- optimum cooling, freeze prevention, lubrication of the water pump, and corrosion resistance
Is BMW coolant leakage typical?
Your BMW might have one problem. Several issues, including a damaged radiator, a poor head gasket, or a frail radiator cap, might cause coolant leakage. You should contact a specialist as soon as you notice a coolant leak as this could cause very serious issues for your engine.
Can you combine blue and green coolant in a BMW?
It appears that they can coexist, with green being able to mix with blue-filled cars but not the other way around. from getbmwparts copied: G48 coolant (blue) should not be used in vehicles that were first filled with HT-12, although BMW HT-12 can be used in any vehicle that now uses G48.
Can I simply add coolant on my own?
Add the proper coolant to the reservoir if the coolant level is low (not the radiator itself). Either diluted coolant alone or a 50/50 blend of concentrated coolant and purified water are acceptable. Replace the cap and tighten it until you hear a click when the coolant reaches the cold fill line. Shut the hood.
Do I have to wait to drive after adding coolant?
After adding coolant, how long should I let the engine run? The most crucial thing, he continues, is “your own safety.” The engine, hood, and any leaking coolant can all cool down by waiting for at least 15 minutes.
Can I operate a vehicle with little coolant?
Electric cars, hybrid cars, diesel engines, and gasoline engines all inherently produce heat. Some of this heat is directed into the interior of your automobile when you turn on the heater for comfort. However, there are other ways to control the majority of the heat.
Your car relies on a liquid known as antifreeze, sometimes known as engine coolant, to guarantee that the engine maintains an ideal working temperature. Driving with insufficient coolant could cause your engine to overheat, which is usually bad for your engine, your car, and your trip!