Find the tiny odometer button in the instrument panel’s lower left corner. until the service message shows, press and hold. When the message asks “Reset?” release the button, then press and hold it once again.
In This Article...
How can I reset the service indication on my BMW?
Everything in my BMW is functioning perfectly now that I recently had maintenance done, however the service light won’t go out. It’s starting to annoy me a lot. How do you turn a BMW’s service light back on?
In less than two minutes, find out if your auto insurance is being overcharged.
Constant notifications after just having your automobile serviced might be very annoying. Fortunately, there is a very easy solution to your issue.
Follow these easy steps to reset the service indication on your BMW:
Step 2: Insert the keys into the ignition while using your left hand to press the odometer reset button. Step 3: Turn the keys once to the accessory position while continuing to hold the button. Hold off until the indicator light begins to flash.
Step 4: The phrase “reset” will appear after a little delay. Press and hold the odometer reset button once more, then let go.
Step 5: Releasing the odometer reset button a second time will cause five green LED lights to illuminate, signaling that the system has been reset. You’re finished!
You might need to take your automobile to a repair if, for any reason, the service signal starts to flash again because there might be a more serious problem at hand.
Vehicles need more upkeep as they age. A roadside assistance membership can give you security and guarantee you won’t get stranded. Roadside help is available from Jerry at amazing rates.
Get jumpstarts, lockouts, new keys, towing, and more services. To find out if you’re eligible for a special discount rate of $50 for your first year, call our helpful experts at 1-833-445-3779. a
Instrument cluster is used to do a service reset:
- key into the ignition.
- Wait for the service reminder to go away by pressing the ignition start/stop button while holding the clutch or brake.
- Press and hold the odometer reset button or stalk as soon as the service reminder signal stops working. Keep pressing the odometer button when the warning triangle appears after three seconds, and an oil can will emerge after another two to three seconds. NOTICE: If the odometer button is depressed for more than ten seconds, German lettering (indicating the vehicle’s software level, can bus, etc.) will appear. This means that you have exceeded the reset procedure’s time limit and must restart from scratch.
- Now, the service menu ought to appear. To scroll up and down through the different service items, press the button (or repeatedly tap whether the switch is a button or a stalk). NOTE: On more recent vehicles, you might be able to scroll up and down through the different service items using the rocker/toggle switch on the turn indicator lever. see Fig. 9
- Press the BC button on the end of the turn indicator lever once the item to be reset is visible. The word “Reset” ought to now appear on the screen. A spinning clock icon will appear once you press and hold the BC button for a few seconds. The service item’s reset process has been completed.
- To choose another item (as in step 4), scroll up or down; to leave, push the ignition start/stop button.
How can I delete the notifications from IDrive?
Log in to your IDrive account to turn off notifications. Click the “Settings” tab on the “Dashboard” page. Click to select “Disable Notification.”
How can my BMW 3 Series be reset?
The mechanic will reset the computer in your BMW after the service is complete so it can record your mileage and let you know when the car will need maintenance again in the future. However, the techniques listed below can help you if you maintain your own car but are unclear of how to reset the computer system.
- With the engine off, turn the key to the ON position.
- For TEN seconds, press and HOLD the ODOMETER button. It can be found at the Instrument Cluster’s extreme bottom LEFT corner.
- The dash screen will display FGSTNR along with a number. Your chassis number is this.
- The LAST FOUR numerals are added. Ex: 3+4+5+6= 18 Your UNLOCK CODE is going to be 18.
- Press and hold the ODOMETER button one more until the FGSTNR clearing area appears.
- Press the odometer button until the upper Menu area (entering code menu) reaches 19 after the bottom area has cleared; When you do, the text will appear at the bottom: Press the odometer button to enter your unlock code after turning the lock on. This is seen in the bottom portion.
- The screen will appear as in the image above after a little period, at which point the menu will once again appear at the top. To access the number 21 menu, press the odometer button.
- On the screen’s bottom, it will say: RESET? To complete the reset, press the odometer button.
Your BMW’s computer has been restarted! The existing settings must now be added again, or new ones must be added.
**NOTE: Slowly repeat the procedures if you are unable to reset the BMW computer on your first attempt. If you’re still having trouble, ask the dealership for help or refer to your car’s owner’s manual.
My BMW Connecteddrive app has to be reset.
Connected Drive by BMW. To reset the car data on your BMW with Operating System 8, choose “Menu” > “System settings.” Please be aware that after being restored to factory settings in vehicles with a manufacturing date of 11/2020, the vehicle will be deleted from your BMW ID on the My BMW App and My BMW webpage.
Why does my BMW want me to park?
When this dash-mounted light is illuminated, your parking lights are turned on. Turn Signals: These are the turn signal indicators for your BMW. If your turn signal bulb needs to be replaced, they will begin flashing more quickly than usual.
Why does BMW have an exclamation point?
Warning Light for Tire Pressure
Your BMW has a mechanism that continuously checks the tire pressure in each of your tires. A dashboard warning light in the shape of a tire with an exclamation point will turn on if it detects that one tire is too low.
What does “service due” on your BMW mean?
Service Vehicle: Your BMW needs service if this light is red. When it’s yellow, your BMW needs maintenance soon. It’s best to book a servicing appointment as soon as you can in either situation.
How can I look up BMW’s past?
If your car has iDrive, you may retrieve the service history by going to Vehicle Information -> Vehicle Status -> Service Requirements -> Service History. You may see illustrations that outline each step on the left side of the page. You will also be able to see the dates of the most recent maintenance and the work that was done if your automobile was built after March 2009.
Additional methods for gaining access to your car’s history are as follows:
- You should check the warranty details, as a good reminder. This will inform you of any remaining coverage or associated benefits. as well as looking over the vehicle health report. This will give you a general idea of the situation and any problems that can arise.
Your automobile is tracked by the BMW app?
On a busy Friday afternoon, a shopping mall parking lot is a real driver’s nightmare. It’s not hard to lose track of your automobile when they’re packed in like sardines. Thankfully, the My BMW remote app can locate your vehicle for you!
The My BMW remote app uses the GPS location of the car to find it without you having to be close to it and provides driving instructions to your BMW.
Is my BMW’s service record available online?
No and yes. A computerized maintenance history is now standard on all new BMW vehicles. You can obtain BMW service maintenance records by VIN if you are the owner of the BMW and all maintenance and warranty work has been completed at authorized BMW locations. In order for the dealership to download the Xerox of your service history and offer it to you, you must give them the vehicle identification number. Remember that you cannot access the service history online directly. But if you don’t own the car, the process won’t be simple. You may or may not be entertained by the dealerships. On the other hand, if the vehicle has not received complete maintenance at authorized dealerships, an online search of the BMW service history will be fruitless. To verify the car’s service history in this instance, you need to look a little further.
Is there a tracking device in my BMW?
Today, BMW is using more technology than ever before in their latest vehicles. The 2019 BMW X4, X5, X6 and X7 models can accommodate trackers that allow you the freedom to access your car’s features and navigate from anywhere, just as the 2018 X2 and X3 models. Car theft is expected to become a thing of the past as trackers make use of the most recent technological advancements.
Enjoy security and peace of mind knowing that your Trackstar stolen vehicle tracking system is accredited by Thatcham and protects you from possible vehicle theft. The UK automotive industry has approved the installation of Trackstar, the ONLY stolen vehicle tracking and recovery product that has received approval from Jaguar, Land Rover, Range Rover, and BMW.
- Approval of Insurance
- Motion Detection
- 24 Hour Surveillance
- Standard Pan-European Cover
- Range Rover, Jaguar, BMW, Land Rover, and approval
- applicable to your upcoming automobile
Our trackers are BMW approved and offer cutting edge GPS tracking with integrated Motion Sensor technology, round-the-clock monitoring, and full transferability to a future vehicle.
Why does the triangle on my BMW have an exclamation point?
The icon denotes a problem with your engine, its emissions, or any of its components. System for steering An exclamation point on your steering wheel indicates that your steering system is malfunctioning. It might also imply that the power steering isn’t working.
How can I reset my BMW now that the battery has been changed?
One of the vehicles with the most advanced intelligent operating system in the world is the BMV. Therefore, the first thing you must do after every hit or replacement of an object in the car is to restart the entire vehicle.
This setup enables the computer to anticipate your next replacement requirement and alert you to it. After changing the battery, resetting the BMW computer is a quick and easy process.
- First, turn on the controller again.
- Step 2: Press “Trip” to activate it and make it light.
- Step 3: Hold down the “trip” button while continuing to press and hold it until the “Reset” button shows up on the screen.
- Reset in Step 4
Where is the service record for BMW kept?
Where can I obtain the information about my iDrive service history? You must visit the Service Requirements page in order to access the iDrive Service History menu. The Service History ought to appear immediately after that, at the top of the list.
Why does my car have a yellow exclamation point?
On a typical day, you’re driving down the road when all of a sudden you see a light starting to flash on the dashboard of your car. It’s one of the many warning lights on your car. You don’t exactly recall what this one means, though, and you don’t have time to consult your car’s manual.
This one is rather simple to recognize. If you see a circle with “ABS” in the center, your antilock brake system is malfunctioning and needs to be checked out right once by a professional.
A key-shaped symbol standing above the water means that there is a problem with your engine that is causing it to overheat and reach dangerously high temperatures.
The tire pressure warning light is a symbol that resembles an exclamation point enclosed in a horseshoe. This alerts you if your tires aren’t precisely inflated with air. To solve this issue, visit a nearby air pump.
If you notice a sign that resembles the sun on your dashboard, one of your car’s external lights probably isn’t working properly. You should swap out that broken lamp if you’re going to be doing any nighttime driving soon!